how to remove text. For example, I am trying to get the username of the logged on user (e.g. Bryn)into a variable. I did this with variable = My.User.Name
However this also brought the domain with it (e.g. aaabbbcccBryn).
Is there anyway of getting rid of the domain? The App will be used on many domains, so removing the first, say, 9 characters won't be any good.
I have a text file as follows:for example:
apple:1 southafrica:34
5.00
orange:2 southafrica:23
[code].....
I have the first part done, ... I can delete all the text before spacific text, ... now I need to delete all text after a spacific point in a string of text.
I'm making a better, and more simpler BandWidth Monitor, and I'm extracting the Bytes Recieved, ... but just the value, and leaving out all the rest of the text.
here ya go, check it out.
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]....
i have a picturebox which displays a map i have 2 modes add point and delete point when the user clicks the picture it creates a point on the picture where the user has clicked that works perfectly its when i try and delete the point when it doesent work :/ i have all the points loading from an xml file this is the code i have:
[Code]...
basicly i want it to when the user clicks the point it fines the x any y in the xml delete the node then delete all the points on the map then reload them all according to the xml
I'm trying to extract a piece of text from within the string, defining both a starting point and an ending point. For instance, say I want to search for the text found between "That is a " and " car" in the string "That is a red car", so it would return "red".I know you can use .SelectionStart and SelectionLength, but the length of the word can change, so the selection length can vary. What I want is to establish a specific starting point and a specific ending point from which to extract the text from the string.
View 5 RepliesI am able to draw points on a picture box. Add Labels to the points i draw. And delete the Labels at runtime.
It is the last part im having an issue with. Apparrently when i press the button to delete all the labels it does that because i can then start creating the labels again in the picture box starting at 0 again. But it leaves all the old labels visible on the screen. I assume i need to delete the Points to but this is beyond my current knowledge set.[code]...
I hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right
View 4 RepliesI have a Diagonal line drawn on a picture box on my forum and i need to know if the user has clicked the line I have the Start point and End Point of the Line and the mouse x,y location So i basically need to find out if the x,y of the mouse is on the line.
View 2 RepliesI want to know if its possible to loop in a variable and grab info from point a to point b
This is what I have stored in my Variable
PHP
</div> <!-- div reviews end white-space:nowrap; margin-bottom:5px; class="reviews" -->
<div class="list_address">
[Code].....
Application - Powerpoint 2003
VisualBasic - 2008
I want know, How can i extract the power point note text?
I have several points where I draw a curved line from point to point using:e.Graphics.DrawCurve(p, theArrayOfPoints)Was wondering is it poss to draw text starting from the 1st point that followed the curve? This way the text bends.
View 14 Repliesin order to create fancy custom end caps on the ends of a line, a structure like the following can be used:
Dim pts() As Point = {
New Point(-2, -2),
New Point(0, 0),
[Code]....
be used to create the same point array. I can see splitting these values into an integer array but how would these in turn be placed in a point array of whatever size is defined by the text values so they can be converted to end points of a line that is developed as values are changed in the text box.
I want to specify the user to enter only the numbers and decimal point in the text box.[code]values something like that which contain only numbers and dot.This is the code to enter the numbers only.[code]How to make the code to accept dot also?
View 5 RepliesRight i need to be able to read a text file up to a certain point or from a certain point EG..
textfile :
asd
sdfklg
adsfkgjddgjfg
[Code]....
btw.. as its a save file type thing the text is not going to be the same as above that just to get my point across to you but the "point of change" (####)
First, the overall objective is to find the best point within a multipoint filled 'star', at which to start drawing text. That is, depending upon the size of the star and the number of points, there is a larger or smaller area within the points that is filled with colour. So a 5 point star has a relatively small area that is filled, in which to draw text. A 40 point star of the same radius has a much larger area filled. If I can determine the size of this area as a rectangle, then I can measure the string and draw within it using the best fit font and starting position. The code below is an attempt to answer the question but I am stuck trying to find the text area rectangle within the filled portion of the star. Some of the code exists purely to explore the means to determine how to identify this rectangle (and is probably the totally wrong direction).
The second part of the problem is in exploring the options, I tried to draw a vector to different points on the circumference of the star. This is the code highlighted. The lines drawn do not seem to be the correct length nor the correct angle but I cannot see why.[code]...
I have a text file like this:
4.5 28 Red (T1 ) [1 12.86 53.8] 229111 -28275 198452 -1309 | 11.0 28 Red (2 13.10 04.0) [T1 ] 130611 2948 229111 28275
I want to chage the value in green colour and red colour column in each line. how can i point to that column?
I was wondering if it is possible to point to a textbox created in the form designer via a string variable. Basically, I'm creating a golf management system with a feature allowing a user to define their own course. Each hole has a corresponding textbox into which a user can input the hole's par and then the system should total up the first 9 pars, the last 9 pars and then all 18 pars; displayed in 3 different textboxes.
The input textboxes have been named txtP1, txtP2, ..., txtP18, so I was wondering if I could simply concatenate a loop control variable onto a constant of "txtP" to point to each input box.
This is what I have at the moment, but it's throwing up errors saying that .text is not a member of string.
Sub UpdatePar()
Dim inpar, outpar, totalpar As Integer
Dim pointer As String
[code].....
how to add multiple text to a point pair list in Zedgraph. Add text to one point pair can be done like this:
Dim myPane As GraphPane = zg1.GraphPane
Dim TextObj As New ZedGraph.TextObj("High", 10, 10, CoordType.AxisXYScale, AlignH.Center, AlignV.Center)
[Code]....
Theres a problem with the code above when the graph scrolls the text is following as it should, but it's also visible in the pane background.
I want to add text whereever the blinking vertical line is in the textbox.
View 4 RepliesWe have some predefined strings that can be inserted into a text box during data entry via a button click. How can we track the cursor insertion point so the inserted code is in the right place if the user clicked somewhere in the middle of the data before clicking the button?
View 3 RepliesI have been working on a small hack around with Power Point to automatically create a Text Box Shape with some preset effect in which the text is dynamically fetched from clipboard. I have quiet a bit of a problem here, the functionality works fine with the following VB script with macros.
Sub ReadFromFile()
' CLIPBOARD
Dim MyData As DataObject
Dim strClip As String[code].....
providing the script for wrapping the text inside the shape which has a defined width and height as in the code above?
I'm trying to calculate the direction between two points on a two-dimensional grid. Actually I want to determine if that vector is within a range of two values. Suppose the grid's origin is 0,0 at the upper left corner, and 0 degrees represents north. I have a point A on that grid. I want to know if a line from point A to point B on the grid is within a range of directions between 111.8 degrees (a little south of east) and 158.2 (a little east of south). Those are approximations; the 111.8 is 90 degrees plus the arctangent of 2/5, and 158.2 is 180 minus that value. I worked out a series of calculations worthy of a medieval astronomer, but I suspect there is a simpler way. I'm going to have to do this for a variety of other vectors, and I'd like to generalize
View 4 RepliesI know how I can construct an icon setting point by point, but that isn't what I want. I want to use a bitmap file or a jpeg -is easy to convert an jpeg to an bitmap- and built an icon that looks like this picture.
View 2 RepliesI want to make a drawing application which needs a few drawing functions I cant handle myself as im not very mathematicly inclined The first on the list of functions is to create an arc from a start point, end point and radius. The method signature is as followes.
Function CreateArc(byval StartPoint as PointF, EndPoint as PointF, Raduis as single) As PointF()
'Code to create an array of points...
[Code]....
I have a chat/server system and when the text gets to a point were the scrollbar becomes active it dosnt go to the bottom it goes to the top. So say I was at the bottom of everyones text and than I write somthing it will shot me back to the top. My code is:TextBox1.Text &= vbCrLf & readData
View 2 RepliesI want to be able to run a thread and then at a certain point pause it and wait for the user to enter some text into a text box and then when they press submit i want the program to run again from where it left off.
View 10 RepliesI'm trying to work out how i can make my multithreaded app stop at a certain point and wait for the user to type something into a text box and click ok. It must then carry on and when a different thread gets to that point it stops again and waits for the user to input some text again.
View 1 RepliesI got an text file that record data, and I need to read the data and do some comparisons. All data read will be showed in a form. If the data is fail, I need to show an alert to the user and wait for user to respond. If user responded to the alert, the program will continue to read data and do comparisons. The issue that I'm facing is that I don't know how to continue read file from the last read point.
View 19 RepliesI am running a Point of Sale program that writes the ticket information to a text file and then prints the file.The problem I am running into on the one of the computers I am dealing with is that it prints the vbTab I am sending as one space. The computer is running Windows 2000 SP4 and has the .NET framework up to 2.0
View 5 RepliesI have a DataGridView that will occasionally have a RowError icon displayed in the RowHeader (shown below)I have code that displays a small form when the users mouse moves over the row header or clicks the row header.I would like to draw aline from the top-left of the form to the middle-right of the row header.I basically want to point from the form to the error icon.
View 1 Replies