VS 2008 Add Text To A Point Pair List?

Aug 11, 2009

how to add multiple text to a point pair list in Zedgraph. Add text to one point pair can be done like this:

Dim myPane As GraphPane = zg1.GraphPane
Dim TextObj As New ZedGraph.TextObj("High", 10, 10, CoordType.AxisXYScale, AlignH.Center, AlignV.Center)

[Code]....

Theres a problem with the code above when the graph scrolls the text is following as it should, but it's also visible in the pane background.

View 2 Replies


ADVERTISEMENT

Point Type (pair Of Values) Using Decimal Or Double?

Apr 24, 2010

Is there such a thing as a type similar to a point, but contains a pair of decimals, or a pair of doubles, rather than integers? I searched the forums and google with no luck. I can't believe this has never come up before, I must have been using the wrong search terms.

View 4 Replies

VS 2008 Create A List(of Point) From 2 DataTable Rows?

Feb 28, 2010

I have a table with 2 rows named timeStamp and value. I know I can iterate through the rows and create points and add them to a list (new point(timeStamp,value), but is there a way to do it without iteration?

View 11 Replies

VS 2008 Set A Point Without Setting Point.x And Point.y Separately

Jun 4, 2009

I hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right

View 4 Replies

VS 2010 : Search For Text Within A String (Starting Point And Ending Point)?

Dec 31, 2010

I'm trying to extract a piece of text from within the string, defining both a starting point and an ending point. For instance, say I want to search for the text found between "That is a " and " car" in the string "That is a red car", so it would return "red".I know you can use .SelectionStart and SelectionLength, but the length of the word can change, so the selection length can vary. What I want is to establish a specific starting point and a specific ending point from which to extract the text from the string.

View 5 Replies

Drawing Lines From A Point List?

Sep 24, 2010

Ok so im looking at this code and it cant possibly be right but im not sure how to do what i want.I have made a list of n points. I now want to click a button on my form and use the picturebox paint event to draw my lines between the points in the list.From what i can see i have at least two issues with this code. 1. Nowhere in this snippet do i reference the picture boxes paint event 2. I do not think that the loop i have is how to navigate through the list of Points to make my drawings.

View 14 Replies

Get Desired Column From Share Point List?

May 15, 2012

I am using the following Caml Query to get data from a share point list.

oSb.Append(" <OrderBy>")
oSb.Append(" <FieldRef Name=""Title"" />")
oSb.Append(" </OrderBy>")

But this query is giving me all columns of list. Is there any way to get only desired column from a share point list using Caml Query?

View 1 Replies

VS 2005 Sorting A List (Of Point) Based On Distance

Mar 26, 2010

I have a list of collection of points on the screen. I want to order them based on their distance from a seperate, independent point. What's working is I have a function GetDistance which does the dirty pythagorian work of returning the distance between two points.

'Create the set point from which to start all measurements from (startpoint)
dim SetPoint as new Point(200,200)
'Create a list to hold arbitrary points to test (endpoints)
dim ListOfPoints as new list(of point)

[Code].....

View 9 Replies

Delete All Text After A Spacific Point In A String Of Text?

Feb 24, 2012

I have a text file as follows:for example:

apple:1 southafrica:34
5.00
orange:2 southafrica:23

[code].....

View 18 Replies

Delete All Text After A Specific Point In A String Of Text,?

Oct 18, 2010

I have the first part done, ... I can delete all the text before spacific text, ... now I need to delete all text after a spacific point in a string of text.

I'm making a better, and more simpler BandWidth Monitor, and I'm extracting the Bytes Recieved, ... but just the value, and leaving out all the rest of the text.

here ya go, check it out.

Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

[Code]....

View 13 Replies

Finding A Point On A Diagonal Line When Have The Start Point And End Point Of The Line?

Feb 14, 2011

I have a Diagonal line drawn on a picture box on my forum and i need to know if the user has clicked the line I have the Start point and End Point of the Line and the mouse x,y location So i basically need to find out if the x,y of the mouse is on the line.

View 2 Replies

Add Text From A Text Box Into A List Box When The Radio Button Unseparated List Is Selected

Nov 22, 2011

I am trying to add text from a text box into a list box when the radio button unseperated list is selected. i can do this easily. howeve ri now wnat to put text into the list box from the text box when the sepereated by comma radio button is selected

[Code]...

View 11 Replies

Delete Text Up To A Certain Point?

Feb 6, 2011

how to remove text. For example, I am trying to get the username of the logged on user (e.g. Bryn)into a variable. I did this with variable = My.User.Name

However this also brought the domain with it (e.g. aaabbbcccBryn).

Is there anyway of getting rid of the domain? The App will be used on many domains, so removing the first, say, 9 characters won't be any good.

View 6 Replies

VS 2010 Loop In A Variable And Grab Info From Point A To Point B?

May 24, 2010

I want to know if its possible to loop in a variable and grab info from point a to point b

This is what I have stored in my Variable

PHP
</div> <!-- div reviews end white-space:nowrap; margin-bottom:5px; class="reviews" -->
<div class="list_address">

[Code].....

View 11 Replies

VS 2008 Add List Box Items To Text Box?

Mar 18, 2009

I know this must be more simple than i'm making it out to be, but it's not working for me.I have a listbox with items that are set up in a specific order and need to be kept in that order when going into the text box line by line.

[Code]...

View 2 Replies

VS 2008 List Box And Text Box Display

Dec 8, 2009

I'm working in a program that need to do the following.An airplane has 15 rows (1-15), with six seats (A, B, C, D, E, F) in each row. I need to write a program to display the seating chart in a list box, when the person clicks on the desired row in the list box, the row number and the status of the seats in the row are displayed in seven read-Only list boxes.Now, I know how to create a listbox and the make the text boxes, my problem is how to display what is in one row into 7 text boxes.Then the person click on any of the text boxes a second form with 4 radio buttons is poping up. This form will have the status of the seats, (Unoccupied, Low Carb Food, Vegetarian and Regular) if any of these is selected will change the status of the seat at the listbox and the text box..Should I use arrays to fill up the listbox and redim when update is require?

View 2 Replies

Get Power Point Note Text?

Jul 29, 2009

Application - Powerpoint 2003

VisualBasic - 2008

I want know, How can i extract the power point note text?

View 3 Replies

Raw Text Starting From 1st Point That Followed The Curve?

Mar 2, 2010

I have several points where I draw a curved line from point to point using:e.Graphics.DrawCurve(p, theArrayOfPoints)Was wondering is it poss to draw text starting from the 1st point that followed the curve? This way the text bends.

View 14 Replies

Get The Next Item From A Value Pair?

Jun 18, 2009

The following code checks each sentence in the listbox and if certain conditions are matched it add a piece of data to the list new question. Each input from the user is checked against each sentance in the listbox and if a match is found (based on the conditions) only then the data is added to the list and the loop exits. My problem now is that for each itteration cycle In_dep_token_pair.Key and trigger_dependency_token_pair can not be Subject and DirectObject at the same time. Is there any way to test for the next item in the keyvaluepair within the same itteration cycle? Something like trigger_dependency_token_pair(current item).Key = "Subject" and trigger_dependency_token_pair.key = "DirectObject".

If (Input_pair.Key = predicate) And (In_dep_token_pair.Key = "Subject" And trigger_dependency_token_pair.Key = "Subject") And _

(In_dep_token_pair.Value = trigger_dependency_token_pair.Value) Then
If (In_dep_token_pair.Key = "DirectObject" And trigger_dependency_token_pair.Key = "DirectObject") Then
If (In_dep_token_pair.Value = trigger_dependency_token_pair.Value) Then

[code].....

View 3 Replies

Add Point And Delete Point When The User Clicks The Picture?

Jul 29, 2009

i have a picturebox which displays a map i have 2 modes add point and delete point when the user clicks the picture it creates a point on the picture where the user has clicked that works perfectly its when i try and delete the point when it doesent work :/ i have all the points loading from an xml file this is the code i have:

[Code]...

basicly i want it to when the user clicks the point it fines the x any y in the xml delete the node then delete all the points on the map then reload them all according to the xml

View 9 Replies

VS 2008 Insert Text With Different Colors In The Same List Box?

Apr 8, 2011

Is it possible to Insert text with different color in the same list box ? For example , the contents of the list box could be :Line 1Line 2Line 3Line 4

View 4 Replies

VS 2008 Parse Text For Fields - Get A String List Of All Values Within [] In A String Of Text?

Oct 18, 2010

What would be the fasted method of get a string list of all values within [] in a string of text? For example: [client_name], are you are doing today? My name is [my_name]. The list of strings would be:

[Code]...

View 6 Replies

Create Point Array From Values In Text Box?

Jun 28, 2011

in order to create fancy custom end caps on the ends of a line, a structure like the following can be used:

Dim pts() As Point = {
New Point(-2, -2),
New Point(0, 0),

[Code]....

be used to create the same point array. I can see splitting these values into an integer array but how would these in turn be placed in a point array of whatever size is defined by the text values so they can be converted to end points of a line that is developed as values are changed in the text box.

View 3 Replies

Enter Only Numbers And Decimal Point In Text Box

Jun 28, 2009

I want to specify the user to enter only the numbers and decimal point in the text box.[code]values something like that which contain only numbers and dot.This is the code to enter the numbers only.[code]How to make the code to accept dot also?

View 5 Replies

Forms :: Read A Text File Up To A Certain Point?

Nov 1, 2011

Right i need to be able to read a text file up to a certain point or from a certain point EG..

textfile :

asd
sdfklg
adsfkgjddgjfg

[Code]....

btw.. as its a save file type thing the text is not going to be the same as above that just to get my point across to you but the "point of change" (####)

View 1 Replies

Identify Best Point To Start Drawing Text Within?

Mar 10, 2011

First, the overall objective is to find the best point within a multipoint filled 'star', at which to start drawing text. That is, depending upon the size of the star and the number of points, there is a larger or smaller area within the points that is filled with colour. So a 5 point star has a relatively small area that is filled, in which to draw text. A 40 point star of the same radius has a much larger area filled. If I can determine the size of this area as a rectangle, then I can measure the string and draw within it using the best fit font and starting position. The code below is an attempt to answer the question but I am stuck trying to find the text area rectangle within the filled portion of the star. Some of the code exists purely to explore the means to determine how to identify this rectangle (and is probably the totally wrong direction).

The second part of the problem is in exploring the options, I tried to draw a vector to different points on the circumference of the star. This is the code highlighted. The lines drawn do not seem to be the correct length nor the correct angle but I cannot see why.[code]...

View 6 Replies

Point To Specific Column In Text File?

Jun 1, 2009

I have a text file like this:

4.5 28 Red (T1 ) [1 12.86 53.8] 229111 -28275 198452 -1309 | 11.0 28 Red (2 13.10 04.0) [T1 ] 130611 2948 229111 28275

I want to chage the value in green colour and red colour column in each line. how can i point to that column?

View 2 Replies

Using String Variables To Point To Text Boxes?

Jun 12, 2011

I was wondering if it is possible to point to a textbox created in the form designer via a string variable. Basically, I'm creating a golf management system with a feature allowing a user to define their own course. Each hole has a corresponding textbox into which a user can input the hole's par and then the system should total up the first 9 pars, the last 9 pars and then all 18 pars; displayed in 3 different textboxes.

The input textboxes have been named txtP1, txtP2, ..., txtP18, so I was wondering if I could simply concatenate a loop control variable onto a constant of "txtP" to point to each input box.

This is what I have at the moment, but it's throwing up errors saying that .text is not a member of string.

Sub UpdatePar()
Dim inpar, outpar, totalpar As Integer
Dim pointer As String

[code].....

View 2 Replies

Multiple Name/value Pair Cookie?

Jun 22, 2011

In my VB.NET code behind, I've created a multiple name/value pair cookie like this:

Dim UserCookie As HttpCookie = New HttpCookie("UserInfo")
UserCookie.Values.Add("UserNumber", Me.UserNumber.Text)
UserCookie.Values.Add("Password", Me.Password.Text)
UserCookie.Values.Add("UserName", Me.UserName.ToString)
Response.Cookies.Add(UserCookie)

Now, what I need to do (somehow) is read that 'UserInfo' cookie in javascript and be able to extract those values at will. Most of what I'm finding out there doesn't quite do what I need to do.I'm trying to do something like this:

var MyValue = ReadCookie("UserInfo", "UserName")

And MyValue would equal whatever the user had typed into the textbox.

View 2 Replies

VS 2005 : Key-value Pair In Combobox?

Jan 27, 2011

Normally when I populate a combobox I do so by binding it to a datatable and assigning a display member and value member. I would like to do the same thing by adding pairs of items in code.I tried using a key-value pair, but that didn't work. The combobox displayed both the key and the value. I would like to have it just display one of the values and leave the other one invisible to the user, but available to me as a key.I thought about creating a custom class with two properties - one to use as the display member and the other to use as the value member. But before I re-invent the wheel I thought I'd check to see if there's already something there in the framework that I'm missing.

View 8 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved