Error - Could Not Load Type 'WireShopAutomation.cfgSectionGroup_WireShopMain' From Assembly 'WireShopAutomation
Dec 16, 2009
I have a dll application that has its own app.config file associated with it. It has custom sectiongroups, sections, element collections, etc. The application name is WireShopAutomation.dll, so the built config ends up as WireShopAutomation.dll.config.The problem is that I seem to be unable to open the section group. The error message is:
"Could not load type 'WireShopAutomation.cfgSectionGroup_WireShopMain' from assembly 'WireShopAutomation'"
It seems to find the config file, but not the class handler for the section group and possibly the assembly itself. The class handler for this is in the same project as the application itself.The configSections section of the app.config file is as follows:
I have a finished app that when built runs fine on my PC ... its when i try to use the app on another PC in the building here it doesnt seem to be working right at all and im also getting an error
After working all morning and finally getting my dll to talk to my rdlc files, I decided to import my functions into my other code, but I get the aforementioned error.My dll is in my PrivateAssemblies folder as well as both my debug and release folders (x86 in case you were wondering).
I have a simple application, that was working just fine then all of the sudden I open the file and the design pages will not show up and I get the following warnings:
Warning 1 Could not load type 'System.Object' from assembly 'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' because the parent does not exist. G:ProgramsCONNS v 1.0ConnectionsFrontPage.Designer.vb 149 0
I have two projects in a solution. One is a class library with my FTP, GPG and some other classes that get compiled into a dll call CBI.Utilities. The other is my main app which in a few places call the ftp class. I added the reference to the main solution by browing to the project from references under the main solution and now I get this error when I try to instantiate the ftp class.
"Could not load file or assembly 'CBI.Utilities, Version=1.0.2053.21021, Culture=neutral, PublicKeyToken=78bbe40a91a1660e' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" Should I be making a reference to the DLL or to the projects. Either way I end up with a reference cbi.utilities.
Quote: Error while trying to run project: Could not load file or assembly WindowsApplication1' or one of its dependencies. The module was expected to contain an assembly manifest.
I don't know whats the cause of this.. Just asking if how can I load or find the missing Assembly or Dependencies? Because when I use this project w/ Setup & Deployment.. i encountering this error message:
Quote:Unable to find a version of the runtime to run this program
Error while trying to run project: Could not load file or assembly 'WindowsApplication1' or one of its dependencies. The module was expected ro contain an assembly manifest.
I am using source safe to maintaine my code.Recently I copied my code to another machine.But everytime i build my project i am getting below error:Problem generating manifest. Could not load file or assembly
'D:WorkingFolderProjectSubFolderobjReleaseSubFolder.exe.manifest' or one of its dependencies. An attempt was made to load a program with an incorrect format.When i check above manifest file is empty (0k).I tried rebuilding (after cleaning solution) , also tried with copy pasting previus manifest file content.None of above solution worked.
it works on 32bit and framework 4 - error: could not load file or assembly Interop.XXXX.dll Steps to reproduce:Create a new VB.Net winform project on a 64 bit system with framework 4 drop windows media player control on form. builds and runs fine. project references has two interops to temporary directory under obj folder copy if necessary the two interops to the build output path and delete the old project references and add new ones pointing to the interops in the output path build and run, everything is fine.ste the target frameowrk to 3.5 and repeat the whole process. the build fails.This is just a simple example of what I am seeing on a much mor complex project. It happens with all interops, not just WMP.
I made an app that connects to a mysql database to update a table. It works fine from my test machine, but if i deploy the app to another computer I get error: Unhandled Exception: System.IO.FileNotFoundException: Could not load file or assembly 'MySql.Data, Version=6.3.6.0 I'm going through google to find a solution, but nothing has stood out yet, just wondered if anyone has encountered this before and knows of a quick fix.
I cannot figure out how to get past this error. I have 1) Given the user "everyone" access to the entire directory that this dll is contained in 2) Deleted the dll and rebuilt the project 3) Deleted the Temporary ASP.NET files in the Windows Directory 4) Restarted IIS 5) Tried to change to a different user in IIS security including trying ASPNET. we are not using windows authentication. 6) Even copied that dll from other machines.
Here's the error. I have no clue at this point if it's code missing inside it or something else wrong with it or my setup. Other people on my team are using this dll ok. Could not load file or assembly 'Anthem' or one of its dependencies. Access is denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System. IO.FileLoadException: Could not load file or assembly 'Anthem' or one of its dependencies. Access is denied. [Code]
I created a SQL application that synchronises with a SQLCE database when loaded. Works fine on my Dev machine but produces the following error on user machines:
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Synchronization.Data, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. File name: 'Microsoft.Synchronization.Data, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
In my attempts to fix, I have:
1) Reinstalled SQL Compact Editon 3.5 on the client machines 2) Reinstalled .NET Framework 3.5 3) Installed Microsoft Sync Framework 1.0 (which puts the 'missing' DLL onto the machines).
I am working on an application which compiles fine on machine that is Win 7 and 64 bit CPU. But when copy and I run the exe file on similar machine (Win 7 64bit) I get error message: Error: Could not load file or assembly 'Interop.ActiveDs.Version=1.0.0.0,... I have added ActiveDS Type Library 1.0 C:WindowsSysWow64activedstlb as a reference in the project file.
A co-worker checked a very simple Visual Basic Visual Studio 2010 application into our version control system. When I checked it out and tried to build it I got the weird error below, which I am guessing has something to do with which .Net Framework the build is targetted towards and also which Framework I have installed.
------ Build started: Project: VB-DEER10, Configuration: Debug Any CPU ------ Build started 10/20/2010 3:35:57 PM. C:WINDOWSMicrosoft.NETFrameworkv4.0.30319Microsoft.Common.targets(1558,9): warning MSB3283: Cannot find wrapper assembly for type library "Microsoft.StdFormat". Build FAILED. Time Elapsed 00:00:00.15 Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped
{"Could not load file or assembly 'OpenCVDotNet.dll' or one of its dependencies. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail. (Exception from HRESULT: 0x800736B1)":"OpenCVDotNet.dll"}
If I build the solution on a machine that HAS a license for ActiveReport then everything is fine. If I build the solution on a machine that DOESN'T have a license for ActiveReport I get:
Error 1 'Could not load file or assembly 'ActiveReports6, Version=6.1.2814.0, Culture=neutral, PublicKeyToken=cc4967777c49a3ff' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)' LC
On the machine that DOESN'T have a license for ActiveReport if I remove the above lines from the license.licx file then everything builds fine. I always thought that if the license couldn't be found then the unlicensed version will be used but it wouldn't kill the build. How do I get this solution to build on any machine whether it has a license or doesn't?
When ever I finish simple programs no matter what it is and i click to debug it it comes up"Error while trying to run project:could not load file or assembly"project name" or one of its dependencies.the module was expected to contain an assembly manifest"
One of them is giving us trouble in only 1 spot out of the 4 spots we use it at:The trouble spot is a windows form project that uses reflection to dynamically load some DLLs that run long running processes. One of these long running processes is an agent that relies on one of our vender DLLsWe're getting the missing assembly exception at the point where we first enter a function that references the library. I already checked the silly things such as if we had forgotten to move a reference from the old version to the new version, but that's not the case. I also checked the bin directory of the project and the assembly is there.
I have an app developed in VB2008 express and it installs and runs correctly on 3 of my computers. I have now tried to distribute the program to a partners computers and have run into some problems. One computer is Toshiba laptop with windows 7 on it and is new and the other computer is an old XP sp3 unit. Both come up with the same error message and will not access the databases or run normally. The error message is as follows:
after being disappointed with VB2010, and with the lack of vb support for windows 7 phone, I thought I'd be happy now that vb is going to be supported after all.So, I downloaded the trial version of vs 2010, to run these new tools.Several hours later it finishes installing, and I start a new project only to run into the error: Error: this template attempted to load component assembly "Microsoft.VisualStudio .SmartDevice.ProjectSystem.Base".
I'm a newb to ASP.NET and I made an app in VS2010 using NET 4.0 (Working all fine in debug mode) I tried to host my app @ aspspider and I'm getting the following error: Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load type 'AuthStealerPanel._Default'. Source Error: Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="AuthStealerPanel._Default" %> I also tried to rebuild the .dll and upload it to the /bin/ and application's root.
.:Error:. Server Error in '/' Application. -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
I am trying to implement a Custom HttpHandler (for the first time), I have been given a tutorial to follow but couldn't get it to work. I then found another tutorial but couldn't get that to work, they are both giving me the same error message.
The custom handler is to protect people from downloading certain file types, although i think the error is somekind of configuration problem as I can't get the website to work at all once I add the httpHandlers to the Web.Config file.
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load type 'FileProtectionHandler'. Source Error: Line 47: </compilation> Line 48: <httpHandlers>
there is one search button to see the report on datagridview using year..so when the more items are there in database correspond it year(say 2012)... the above exception is thrown by filling the datgridview,the problem happens when it tries to connect with crystal report,it shows error...Remember that i face this problem only if there are more records in my database(exactly more than 100 rows)...when i delete few rows from the database,it works fine..I have created a table and added that table to a dataset,then assigned that table1 as datasource for crystal report
there is one search button to see the report on datagridview using year..so when the more items are there in database correspond it year(say 2012)... the above exception is thrown by filling the datgridview,the problem happens when it tries to connect with crystal report,it shows error...Remember that i face this problem only if there are more records in my database(exactly more than 100 rows)...when i delete few rows from the database,it works fine..I have created a table and added that table to a dataset,then assigned that table1 as datasource for crystal report
Public Class crystalform1 Dim r As DataRow Dim t As DataTable
I have a file name, like "Foo.dll," for a library that I know is in the bin directory. I want to create an Assembly object for it. I'm trying to instantiate this object from a class that's not a page, so I don't have the Request object to get the path. How do I get the path I need to use Assembly.Load()?
