Erroring When Passing Oracle Parameter Type PLSQLAssociativeArray
Jan 3, 2012I have a oracle stored procedure that looks like:
[Code]...
I have a oracle stored procedure that looks like:
[Code]...
Im using a datatable and i am trying to do a insert statement into an oracle database by passing selected values from the datatable to the insert statement via parameters. I'v traced the parameter collection and it has the correct number of parameters to be passed but it is giving me an error saying a value being passed in is null but it is not, during debug you can clearly see the value of the parameter is not null.
Dim FuelInsert As String = "INSERT INTO table (COMPANY, TRAN_DATE, GAS_GALLONS,DSL_GALLONS,DEF_GALLONS,KER_GALLONS,E85_GALLONS,DDS_GALLONS,WDS_GALLONS)" _
+ "VALUES(:Company, :Trans_Date, :Gas_Gallons, sl_Gallons, ef_Gallons, :Ker_Gallons, :E85_Gallons, ds_Gallons, :Wds_Gallons)"
[code]....
I just wanted to know if there was a easier way of creating the parameters or if i am missing something simple that causing the values of the parameters being passed to get mixed up. The code retrieves the values i need and builds the parameter collection of 0-8 nodes which is correct.
I have a storedproc accepts parameters in XMLtype as
CREATE OR REPLACE PROCEDURE GetDetails(
p_para IN XMLTYPE,
[code].....
What happened when parameter passing. Here is a test project I write.
Public Class Form1
'1.test string
Private Sub btnString_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnString.Click
Dim str1 As String = "x"
[Code] .....
From the project you can see, when pass integer type parameter (value type) into a method , if use ByVal keyword, the value won't change. If use ByRef keyword, the value will change (I can understand it, to my understanding, when using ByVal, It pass the value of the argument to the method; when using BvRef, it pass the address of the argument to the method, so the value can be rewrite)
Well, for the following two scenarios , I can't understand why.
String type is reference type, but it acts like integer type.
Val type is also reference type, but no matter what you use(ByVal or ByRef), the result will be the same.
So my question is what actually passed into method? What's the underlying mechanism about pass parameter? What's the effect of ByRef and ByVal to value type and reference type?
I have a storedproc accepts parameters in XMLtype as
CREATE OR REPLACE PROCEDURE GetDetails(
p_para IN XMLTYPE,
i have to pass 4 parameters to this proc how to do this?
i am passing param as db.Parameters("p1", Oracle.DataAccess.Client.OracleDbType.Varchar2, _
' LN.Length, CObj(LN), Data.ParameterDirection.Input)
[code]....
I want to have a "template" function that can receive different parameter and a type parameter, like:[code]But Vb told me that tupeList is not defined... is there a way I can do that?
View 2 Repliesmy issue could be found simple but I'm founding it difficults in regard of dealing with array concept in oracle and vb.netI will start by showing to you a code done in oracle side1-this script should be executed in hr schema2-create a table and call it job_testas
create table job_test as
select * from jobs
where 1=2
[code].....
I have an app that coonects to 2 different DB servers using the same code but different connstrs to fill in a Combobox. On a certain Pc the first combo fills in and the 2nd does not.It never timesout and no error msg is ever rpted back. It just sits there forever after the adapter.fill cmd.Only difference between the first combo fill and the 2nd is a different connstr.Only 12 rows should come back from the Db. I have connected to Db in SQL query window and ran the SQL cmd and the 12 rows come back in a second or 2.On other PCs this same app works fines. I have the PCs on the same OS and all the newest updates installed.I have tested the network ports, used different ones. Used different user log ins on the same PC. It just wont work.
View 9 RepliesI am calling a crystal xi report from a windows form and passing 2 date parameters and a customer name. In some cases this customer name contains '&' eg Brown & Williams
In these cases my report fails and errors. if the name doesn't contain '&' it works. How can I pass the parameter with a & in it ?
I created a dataset that is getting data from an access database. Now i would like to go further and make the dataset query accept a parameter from a form datepick value. the query in my table adapter I have changed it as follows to accept a parameter on date1.[code]The code I am using in my form is as below. I get a null reference exception on the second line(Object reference not set to an instance of an object). it seems as if my selectCommand is bringing nothing.[code]
View 4 RepliesI have a bound DataGridView (dgvBuild) that contains data based on a "ProductID" that is derived from selecting the value from a ComboBox. How do I pass the ComboBox Value to the DataAdapter to retrieve records to reload the dgvBuild? Below is the code for theDataAdapter.This is the line that was created when I bound the DataGridView to a DB Table.
View 8 RepliesI need to pass an event as a parameter to a function and I'm wondering if there is any way of doing this.The reason why I need to do this is because I have a sequence of two lines of code that is littered all over my program, where I dynamically remove the handler to an event, then set the handler again. I'm doing this for several different events and event handlers, so I've decided to write a function that does this. As an example, let's say I have a combobox in my code called combobox1, and I have the handler called indexChangedHandler. In several places of my code, I have the following two lines:[code]Now, I don't want to keep on repeating the above two lines of code (or similar) all over my program, so I'm looking for a way to do this:[code]So far, the "evt as Event" part of the argument of the setHandler function is giving an error. Any ideas on the right way to do this will be very welcomed.
View 2 RepliesI need to pass an event as a parameter to a function and I'm wondering if there is any way of doing this.
The reason why I need to do this is because I have a sequence of two lines of code that is littered all over my program, where I dynamically remove the handler to an event, then set the handler again. I'm doing this for several different events and event handlers, so I've decided to write a function that does this.
As an example, let's say I have a combobox in my code called combobox1, and I have the handler called indexChangedHandler. In several places of my code, I have the following two lines:
RemoveHandler combobox1.SelectedIndexChanged, AddressOf indexChangedHandler
AddHandler combobox1.SelectedIndexChanged, AddressOf indexChangedHandler
Now, I don't want to keep on repeating the above two lines of code (or similar) all over my program, so I'm looking for a way to do this:
Private Sub setHandler(evt As Event, hndler As eventhandler)
RemoveHandler evt, hndler
AddHandler evt, hndler
End Sub
so that everywhere where those two lines of code(or similar) occur in my program, I can just replace them with:
setHandler(combobox1.SelectedIndexChanged, AddressOf indexChangedHandler)
So far, the "evt as Event" part of the argument of the setHandler function is giving an error.
P.S I've asked this question on a couple of other forums and keep getting asked why I would want to set the handler immediately after removing it. The reason is because dynamically adding an event handler n-times causes the handler to be executed n-times when the event occurs. To avoid this, i.e to ensure that the handler is executed just once when the event occurs, I first remove the handler each time I want to add the handler dynamically.
You might be asking why the handler would be added several times in the first place... The reason is because I add the handler only after a particular event, say E1, in my form has occured (I add the handler within the handler of event E1). And event E1 can occur several times within my form. If I do not remove the handler each time before adding it again, the handler gets added and thus executed several times.
Whatever the case, the processing occuring within the function is not of ultimate importance to me at this time, but rather just the means of passing an event as a parameter.
I'd like to create a function myFunc with one parameter, which is a delegate. I should be able to call it with a delegate as parameter.E.g.[code]But how do I code myFunc, in other words, how do I enable myFunc to have it passed a delegate so that it can be called using myFunc(addressof test Func)?
View 4 RepliesI'm wondering if this sort of thing is possible in VB.NET.. say I have a routine which accepts an integer array, defined as:
Sub WriteTable(iRows As Integer, arrColumns As Integer())
The arrColumns parameter is an integer array of column widths.
I can pass a value by doing this:
[code]....
i am getting all filenames from a directory.parsing out the directory names & the .vb extension then converting those filesnames to classes.Every file in the LPCriteria direcotry is its own class with a "Evaluate" function.[code]
View 1 Repliessample code for passing parameter to crysatl report dynamically in vb.net ...?
View 2 RepliesI wrote vba function in excel and I want to call this function in vb.net with parameter passing.
View 2 RepliesI am getting error when debugging a project. The error is as below,
"FormatException was unhandled
String was not recognized as a valid DateTime."
Highlighting the following line
[code]...
Assuming I have the following code that is iterating over controls in a panel setting various control information.Private Sub BindDataFields()
[Code]...
Is there a way to pass an optional parameter to a webservice, instead of having to overload the method?If the webservice user is accessing the webservice directly, I want to do ActionA, if the user is accessing the webservice through my web interface, I want to do ActionA + ActionB.
View 1 RepliesCan't seem to figure out why this is not working.
Dim Myspcmd As New SqlCommand("spDataImport", myConnection)
Myspcmd.CommandType = CommandType.StoredProcedure
Myspcmd.Parameters.Add(New SqlParameter("@FileName", Data.SqlDbType.NVarChar, 100)).Direction = ParameterDirection.Input
Myspcmd.Parameters("@FileName").Value = "Import_File.dtsx"
myConnection.Open()
[Code]...
I'm calling unmanaged C++ Dll function from VB.Net project by usin dllimport attribute like this;
<DllImport("Injection.dll", CallingConvention:=CallingConvention.Cdecl)> _
Private Shared Sub Injector(ByRef Client As String, ByRef Dll As String)
End Sub
I am using following code to connect to my database.
Dim conStr As String = "Data Source=.SQLEXPRESS; ![enter image description here][1]
AttachDbFilename=|DataDirectory|dbTest.mdf;
Integrated Security=True;
User Instance=True"
Dim sqlQry As String = "SELECT * FROM [tblTest] WHERE ([Name] = @Name)"
Dim dAdt As New SqlDataAdapter(sqlQry, conStr)
Dim dSet As New DataSet()
Then filling adapter with
dAdt.Fill(dSet, "tblTest")
And then I can use the data the way I want.
My question is: How to pass the value of parameter that user will give through a text box on my webform.
Dim sqlQry As String = "SELECT * FROM [tblTest] <b>WHERE ([Name] = @Name)
I mean how to pass the parameter value to my query?
I want to pass a date as parameter in vb to query the data from the table.If I hardcore the value in the query it works fine for me, but if I pass it as parameter to query, like I am getting the data from edit text and trying to send that as a parameter, this does not work.
SELECT *
FROM VehicleAnalogParamDownload2
WHERE Vapd2_Date between 'From_date.Text' And 'To_Date.Text'
I seem to be passing the parameter to the report (I placed the parameter field itself on the report to verify this) but it does grab any information based on this parameter. All of the fields appear with no data but the parameter is showing up correctly.Yes, I have verified that the parameter is in the select statement of the report.The report also is exporting correctly but still without the data.
Below is the code I'm using:
CR Loading
Try
Dim cryRpt As New ReportDocument()
Dim reportPath As String = "MyReport.rpt"
cryRpt.Load(reportPath)
[code]....
From what I understand, when you use AddHandler you're not actually calling a Sub, so you can't pass a parameter. I'm confused on what to do though about this. I've just populated a DataGridView and added a button to it in the codebehind. I'm then using an AddHandler to add a click event to the button. So when I get to the click event, I need to be able to access to the datagridview because clicking the button takes data from the datagridview and loads it into excel. What would I do about this. This is my Method where DataGridView was just populated
Dim btn As New Button
btn.Name = dgv.ToString()
btn.Location = New Point(0, 0)
[code]....
I am working with some code that uses array lists and I am using some of these to pass data back and forth like this: whatFile = (sideLookUp(x)) and its working, BUT when I turn this code into a sub/function then I call it I get problems, like double to string errors, even though its all set to double.
[Code]...
In my VB.NET project I wanted to run a JAR file in a separate thread. Now the question : Is it possible to pass parameters to a JAR file during run time from VB.NET??
View 1 RepliesSo for instance I have this method: LoadFunkyInfo(byval funkyData as string) And I pass it something like this:
LoadFunkyInfo(giantTable.Rows.Item(0).Item("blahName")). Should I do this instead?
dim foo as string = giantTable.Rows.Item(0).Item("blahName")
LoadFunkyInfo(foo)
I read somewhere long ago, that it's better to assign the method to a variable and pass that variable to a method, as opposed to passing the method as a parameter. Is that still true? Or true at all?