In a public module (codefile) I defined a data structure called db_connection,then declared a variable of that type like so: Public db_con as db_connection I pass db_con to a sub. I expected the db_con structure to be populated with values after the call to the sub. It does not.This is something I have done for years in vb6.What might have changed to prevent this from working?
View 2 RepliesI have a question on a datagrid object in vb.net 2008, that I what to be populated with certain values of a parameter from mssql database. The connection is made, the column header are loaded, but I what, when the form is loaded, to populate the datagrid only with certain values, doing a select commnad where id has a value given by me.What is the command to have this select done and display the values in the datagrid?
View 3 RepliesI have completed all the code for a loan calculator, but am unsuccessful in displaying decimal variables in string as "currency". I have added the .toString("c2") statement and only get one array to display in currency, then the second array does not round properly. Is there a convert function that will work? Here's my code:
Public Class frmLoanCalc
'Ken Schoening
'Loan Calculator
[Code].....
i have a Checkedlistbox in a windows form, and have defined 5 values in it.Also the form holds a datagrid in it. i have manually defined 2 columns in it.Now i would like to populate datagrid with some data according to the check list values selection. When any selection was done in the checkedlistbox, some data need to added to the gird.in case if i am ticking further selection, i need the datagrid to be inserted with additional values with the prior populated data.
being a beginner, i am not able to get any idea to get this worked.
I have a checked listbox that I've populated with a table that has three columns, Name, Address, Phone - and have done so successfully, but when i display the items in the listbox, i would like to retrieve additional values of the checked items other than the primary displayitem.[code]'we now have an array full of the Name column only, from our checked items 'i'd like to grab the other two as well (not to display in the listbox, but to use elsewhere as variables) 'and keep the checked listbox as a control in the above code, the fill_array variable is only populated with the items displayed in the checkedlistbox - my question is, can i keep the display item the same and pull the other two columns from the datasource, but only for the ones that make the checkeditems list?
View 5 RepliesI have the following code,
PB.ForEach(Function(x) x.Cost = GetPartCost(x.PartNumber, x.Units, x.Cost, FB))
Return PB.Sum(Function(x) (x.Cost * x.Qty))
However it always returns 0. I've checked and the GetPartCost function executes and returns a non-zero number but the list item cost properties are never updated.The property is just a simple property,
Public Property Cost() As Double
Get
Return _Cost[code]....
If I set a breakpoint in the Set of the property, it never gets hit.
Code produces an "error object expected" on:
<script type ="text/javascript" >
var doRedirect = function() { location.href='http://www.google.com' };
$("#<%=Button1.ClientId%>").click(function() {
$("#<%=Label1.ClientId%>").show();
window.setTimeout("$('#<%=Label1.ClientId%>').fadeOut('slow', doRedirect)", 10000);
});
[Code]...
[code...]
In the Call the ByVal's are underlined an mouseover and error list says "Expression Expected". I do not have any expressions to pass along just want to Call a subroutine.
I am adding a web interface (ASPX.NET: VB) to a data acquisition system developed with LabVIEW which outputs raw data files. These raw data files are the binary representation of a LabVIEW cluster (essentially a structure).LabVIEW provides functions to instantiate a class or structure or call a method defined in a .NET DLL file.I plan to create a DLL file containing a structure definition and a class with methods to transfer the structure.When the webpage requests data, it would call a LabVIEW executable with a filename parameter. The LabVIEW code would instantiate the structure,populate the structure from the data file, then call the method to transfer the data back to the website.
How do you recommend I transfer (copy) an instance of a structure from one .NET program to the VB.NET program that executed it?
i am trying to read a log file which has 2000 lines. Input array is my temp array. while debugging i can see the input array values are populated until input array(9,40) after that the array is populated full of question marks. I don know why it is happening [Code]
View 1 RepliesI have a serializable class and structure I created for an ArrayList to be access within a Web Application. The problem I am having is the count comes back as zero after calling New. I debugged the code and the Arrylist is being populated
View 3 RepliesIn VB.NET, let's assume I have the following Structure:
Public Structure Product
Public ItemNo As Int32
Public Description As String[code].....
How would I define a LINQ Query to Sum all of the Product.Cost values in the List? In other words, what would be the LINQ Query in VB.NET to return the value 120.90, which reflects the sum of all three Product Cost values in a single LINQ Query?
I epochly failed creating an array structure. How would I build it like I tried to do with values for each data type.
Structure PovertyGuidelines
Dim Id As Decimal
Dim NumberOfPersons As Decimal
Dim AnnualIncome As Decimal
End Structure
Private Data(20) As PovertyGuidelines
Private Id(,) As Decimal = {{1D, 2D, 3D}}
Private NumberOfPersons(,) As Decimal = {{6D, 9D, 7D}}
Private AnnualIncome(,) As Decimal = {{24000D, 32000D, 27000D}}
I have a user defined structure in a list that I am trying to change the value for in an individual element within the list of structures. Accessing the element is not a problem. However, the compiler complains
"Expression is a value and therefore cannot be the target of the assignment"when I try to update the value.For example:
Public Structure Person
Dim first as String
Dim last as String
Dim age as Integer
[code]....
In what situtations is it best to use reference arguments to return values?
Sub Example(byref value as integer)
value = 3
End Sub
In what situations is it best to return the value (perhaps in a structure for more complex types)?
Function Example() as integer
return 3
End Function
I have created two structures, one named "Product" and the other named "Item". These structures are quite similar but are at the same time quite different from each other. The structure definitions are as follows. Ultimately, I declare arrays in my containing class which access these structures as a type. Their declaration: "Products() as Product" and "Items() as Item". All has been fine and dandy until one day, I go to change the items Enabled() values, and something happens. Not only does it change the Items(index).Enabled(index) value, it does it on the corresponding Products(index).Enabled(index) value, even though it was never specified to do so. Also, nowhere in my coding have i defined this sort of thing to occur. It is rediculous, because I watch it happen. I turn on the watch window, and debug one step at a time, and every time, I watch the Item line step, I look down at the arrays of products and items, and both values have changed. How do I get this to stop, and only change the Item.Enable value??
<Serializable()> _
Public Structure Product
Public Name As String
[code]......
I have a class (using a class rather than a structure only because I can set a default field value for the fields I declare in the class) and I'm using a web service that returns information (demographic information) in JSON. I am using LINQ to get the values of each "entry" from the returned list and in that, I have to parse through and pull out the actual data that I want.Here's how I have it doing right now (just a start, there are 44 of them total, thus my question which will follow the code):
Dim returnedStats = From ljo As Linq.JObject In returnedObject.SelectToken("results")
'
'
For Each stat As Linq.JObject In returnedStats
[code]....
I have two files. My form and a module with helper functions and the definition for a structure. For some reason, when I call finish_up, which should calculate how much freespace a disk has, the values just revert to their original bytes value. However, if I put a msgbox inside the function, the correct information is displayed. Just not once it goes back to the form.
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Disks As New List(Of DiskData)
Search_Disks(Disks)
Finish_Up(Disks)
For Each x As DiskData In Disks
[Code] .....
The finish_up sub should go through each diskdata structure, find if it isready, calculate freespace and size down to their proper amounts and then just send it back. I don't understand where the problem is.
I have an active directory search function:
Function GetAdInfo(ByVal ADDN As String, ByVal ADCommonName As String, ByVal ADGivenName As String, ByVal ADStaffNum As String, ByVal ADEmail As String, ByVal ADDescription As String, ByVal ADTelephone As String, ByVal ADOffice As String, ByVal ADEmployeeID As String) As
[code].....
I have standard .net 2.0 gridview control from which i want to get row keys or cell values from the grid when a row is selected.
I also need to call a method each time a row is selected.
How i can do this using ASP.net & VB?
Module Module1
Public Structure structure1
Public TRANS() As structure2
End Structure
Public Structure structure2
Public X() As Integer
End Structure
End Module
I'm new to VB 2008 after having spent a long time with VB6, so I apologize if this is a stupid question. But I'd really like to have this straightened out.
Let's say I have a pretty large structure that has lots of properties.
Code:
Now say that I want an internal database with about 10 instances of this structure total, describing, say, 10 different products that a store sells. When these values are loaded from a database, they remain totally static. (However, they can be different each time a program loads)
Now say that I have a class. Each instance of this class is a type of that BaseProduct structure. Meaning, each instance of the class pertains to one of the 10 types of products that the store sells. However, this class has additional properties that pertain specifically to each instance, which are not static.
Code:
Now, the problem here is... If I have 200 different transactions, each one contains an instance of BaseProduct. BaseProduct is HUGE, and is largely redundant (only 10 types possible), so I think it's a little silly to include a whole copy of it with EVERY transaction. However, the Transaction class really needs information regarding the base product it pertains to. Is there a way to, instead of declaring a New BaseProduct in the Transaction class, to simply make one of the properties of the Transaction class a pointer to a BaseProduct variable?
In VB6, I would accomplish this by making a BaseProduct(10) array, and then giving each Transaction an ID number referring to an entry in that array. But in VB 2008, using class structure, this is impossible. I can't define the BaseProduct(10) array outside of a class in a namespace, and if I define it in the actual application's form, then the class loses modularity since it relies on the application that's using it.
I am trying to communicate with an external device and i am trying to send a byte array to the external device via sockets but i am always getting a response the message size is too small so i am not sure what i have done wrong. Between the data type there should be no alignment present and all numbers are represented in little endian format. The char array is not null terminated as mentioned in the protocol specifications.
I have to send data based on a struct that embeds 2 other struct. So here's my vb.net code for the struct used to convert to byte array and the sending part.
Public Structure MESSAGETYPE_OIP_Login
Dim Header() As COMMANDHEADER
Dim UserName() As PSTRING
[Code]....
I'm experiencing a problem with the following c-structure:
typedef struct tagTEXTUREPROP
{
DWORD dwSize;
[Code].....
The Marshal.SizeOf obviously calculates a size of 76 and it works with the DLL function, but it leaves me with some bad feelings.
I'm having a problem that's driving me crazy; I can't understand how to convert the XML structure into a class structure (that I want to use to hydrate a XML document).
The XML document looks like this:
xml
<?xml version="1.0" encoding="utf-8"?>
<artists xmlns:opensearch="http://a9.com/-/spec/opensearch/1.1/" xmlns="http://www.spotify.com/ns/music/1">
[code]....
Does anyone know what is wrong with this IF Statement? I'm getting the errors "Expression Expected" and "End of Statement Expected".If DropDownList1.SelectedValue = "Educational Sponsoring" Or "Grants" Or "Product Training" Or "Centres of Excellence" Then
[Code]...
I want to make a structure within a structure. Basically it will appear like this:
Structure ID
dim CardType as string
im CardCode as string
[code]......
In Vb.net I am trying to assign an array of structure to another array of same structure[code]...
View 2 RepliesThe instructions are as follows:
1. Write a Visual Basic Console Application.Inside the main procedure call a function procedure to input and return a value for a double variable called x, the width of a right triangle.Inside the main procedure call the same function procedure a second time to get a value for a double variable called y, the height of a right triangle.
2. From the main procedure call a function procedure which calculates and returns a value for the hypotenuse equal to the square root of (x squared + y squared).You will have to pass the values of x and y to this function procedure.The procedure should calculate and return a double type value.The value that is returned by this function procedure should be equal to the square root of (x squared + y squared).
3. Also from the main procedure call a sub procedure to display the values of x, y, and the hypotenuse.
I have a combo box and onload I want the combobox to be populated with data in a field from the database. However, when I execute I receive an empty combo box please could someone look what am doing wrong..
Private Sub populatecmbprojtype()
Dim cmd As New SqlCommand
Dim conn As SqlConnection = GetDbConnection()
[code]......