I have to make probram in vb.net which can use as a audit tool for computers.give the suggestions how can i extract the data from machines such as what user machine contained what type of softwares are in place.
View 1 RepliesI have developed a VB 2010 express application that works on my windows 7 machine, but when I deploy it to other windows 7 machines the application will not run at all. I created an msi script to install the software on other machines and it includes the .NET 4.0 framework an all of my application dll's and such. Any idea what might be he problem?
View 2 RepliesI have a ASP.Net Web application hosted on a server. I want to restrict same user to login on different machines over the network connection but with certain conditions to be satisfied. So I thought of adding three new columns to the User table so that we can track if same user is logged in on same or different machines.
Those columns are like :
IsLoggedIn : To check if the particular user is already logged in or not.
SessionID : To check if the same user instance is opened.
IPAddress : To check if the same user is on same or different PCs.
This should satisfy some of the below conditions, but it fails to satisfy some of them. Conditions are as follows :
Both computers are on the same LAN.
Each computer is accessing the application over the internet from different locations.
Each computer is accessing the application over the internet from the same location.
Some of the application hosted which means that IP address alone is not sufficient to distinguish different computers.
Some users just close the browser without logging out. So sessions may not be ended at this situation.
How to accomplish all these conditions to satisfy with my application ?
Mainly 4th and the 5th .
I'm fairly new to VB.NET and I'm currently playing around with user controls, figuring out good programming practices. As far as I understand, to create and use a UserControl, I need to create a project with the UserControl in it, then build the project and use that DLL (add it to Toolbox or otherwise).My question is this: Is there a way a have a project (a Form with a bunch of things on it) that contains a UserControl written in a *.vb file inside that same Project? If you do that, the DLL (in my case) never gets produced, possibly because the UserControl is never used and building it is simply omitted. Is it perhaps a bad practice to do that altogether? It simply makes sense to me to keep a UserControl as a part of the Project that uniquely uses it. Is there a reason not to do that?
View 1 Repliesat some points, I need to call the same method on those controls (ex. user presses the clear button on the big control, I want to call the clear f(x) on each of the controls)I thought to toss the controls in a collection, and then be able to handle them something like this:
nextturns out, and I should have realized, methods and properties of controls are not exposed when treated this way. The only thing that can be seen is the stuff that the base class (control, I guess) has.
How to connect client machines with sql server machines ?Vb.Net as front end.
View 8 Replies am trying trying to write some code for a ComboBox that does the following:
1. Allow the user to enter text into the combo box to type entries contained in the list source.
2. Enable autocomplete to assist the user in selecting entries in the list source, both from dropped down state and non dropped down state.
3. Restrict the user from typing an entry that doesn't exist in the list source.
My requirements are:
1. The ComboBox must run some code after a selection has been made or the user has finished typing an entry (not after the focus has been moved to another control)
2. The code must only run once after the user has made a selection from the combobox or has finished typing an entry
The problem: To achieve the above functionality, I had to run code on numerous event's. Sureley there is a better way, here are the events and the reason for the code:
SelectedIndexChanged:This is the code that is run when the user makes a selection. No Mystery here
KeyDown:
Must Run
If e.KeyCode = Keys.Return Then
ComboBox1_SelectedIndexChanged(Nothing, Nothing)
End If
I am using vb express 2008. how i can print the data contained in Listview.
View 2 RepliesI am trying to gather some information about exporting data contained in a datagrid to an excel spreadsheet. I am not using ASP. The number of rows and columns are not set(fixed). If someone was able to point me in the right direction or even better a quick example. I have search through previous threads and am unable to find any that relate to exporting from a datagrid on a windows form to an excel document.
View 15 RepliesI am making a simple application that will be able to store competition data into a text file that I have given a custom extension to on saving. Here is an example of the format that i have saved the data in.
[Comp_Name]Test Competition[Comp_Name]
[Location]Silverwood Lurgan[Location]
[Type]Teams[Type][code].....
When i open the file, i want to redisplay the data in separate text boxes. Later on in the project i want to be able to search within the file for headings for example;
if "[Heat1]" is present then get all text between [Heat1] and [Heat1]
i am currently able to use the streamreader and open file dialog to retrieve the entire string of text fromthe however i am not sure how to go about getting the text between the headings I have used.
If we have a string that contains for example "01_1A" in ascii, I would like to take first two chars and following two chars after mark and send it as hex format, like &H1 and &H1A.
Note that I would not convert ascii to hex. I am asking for something like &H(var).
I know HOW to use cookies, but how to do so in a Windows Forms Application? What reference would I need to add in order to add cookies to the user's machine?
View 1 RepliesIs there a method in the .NET framework for finding each user on a machine? I want to copy a shortcut to each users desktop, but first I need a list of each user on the particular machine.
View 3 RepliesI'm trying to develop a decent answering software that can reply to anything that the person inputed. For example this would be in a chat software, when the user receives Hello? the chat program would reply to the sender "Hi, how are you?" or what ever the person away has set up.[code]
View 4 RepliesI have made an application using VB.NET which is used inhouse. In order to avoid everytime changing of exe on user's (multiple user) machine I want to use shortcut of exe on user's machine.
Where EXE is placed in one central location(Server).
I am getting bellow error on user's machine :
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Error after clicking on ok button:
Application attempted to perform not allowed by the security policy.Togrant this application the required permission,contact your system administrator,or use the Microsoft .NET Framework Configuration tool.
[Code]....
Is there any possible to get ideal time for a particular user in NComputing machine (one CPU with multiple user) using vb.net?
View 1 RepliesI have an idea to make user machine no need to install dotnet framework to run a .net program
first,copy all the project refrence(with mscorlib.dll)to the program directory
then,make a bat file,"dotnet error fix.bat",inside the file includes the command that copy refrences to Microsoft.NET directory will the program run like this?how do i test?
I have form, on which a component is placed, which is inherited from Forms.UserControl. This component, called Panel, handles the layouting as visible in the screenshot below.
The screenshot shows 10 Panels. Each Panel contains its own title bar and visible area, in which any UI can be displayed.When the application starts, the application contains only one single Panel. When the user decides to split this Panel into 2 Panels, those new Panels are displayed side-by-side in the area of the old Panel either horizontally or vertically. Inbetween these Panels a splitter is added, so that the user can resize the Panels. The user can do the splitting multiple times, so that you reach a layout as given in the screenshot above with 10 Panels.
Minimizing and the maximizing the application causes a painting issue as displayed in the screenshot below. The red rectangle indicates the area, where the layout is not displayed properly.
Here some additional information:
1. Windows 7 The issue occurs only on Windows 7 machines. On Windows XP the application is running properly.
2. .Net Framework The application was developed for the .Net Framework 1.1. I upgraded it to 4.0. All warnings were fixed, which occured after the upgrade to 4.0.
3. Layouting Technically The Panel works internally with mutiple Forms.Panel, 1 Forms.Splitter etc. objects. If the Panel is not splitted, it displays the title bar and a visible area below, both instances of Panel. If splitted, the Panel replaces the title bar and visible area with 2 instances of Panel again but divided by a Splitter.
I created setup from VS2005 Setup Wizard now i want to do following actions
-If i already installed my Application then it should show Add/Remove or Repair message currently i am removing from Control panel then again installing.
-I want to run .exe file first when setup Load on User machine.
I want to extract the user id in the webpage[code]...
View 7 RepliesNeed to install a font on all user's machines that will use the application I am writing which creates custom documents in Word. It's a barcode font.I've successfully added the font to my solution and set its build action to Embedded Resource and have also successfully written code to check if the font is already installed on the user's system.
View 3 RepliesI am able to find out when is the last time a user log into a domain but I am also wondering if it is possible to find out what's the machine's name or IP.
In my Active Directory, I see there is an attribute called logonWorkstation but it seems not being used (no value stored)
Im really newbie in VB.NET and i hope that someone could explain how may i do this successful,ok im explaining now.I had two richtextboxes and one button First richtextbox contains the following text:<user_register.php: 2012-02-21 00:03:49
POST
username=sexhunger15
email=ho_t@hotmail.com
email_confirm=
password=vergota
[Code]...
How do I get the startup folder path for "Current user" and "All user" in VB.net?
View 2 Repliesnet application. .exe generated is sufficient to use software. since I have 700 MB (~8k media files) data to include as part of installation I do not want to use visual studio deployment wizard.
[Code]....
How to go about extracting user comments on likes of forums by using the page source.[code]...
View 6 RepliesWhat i want is :
There is one windows app ( made in .NET 3.5, VS2008, C# ) for Windows XP SP2 & SP3
generally users can change there IP or modify their IP Address.
Now,when my apps starts i dont want users to change there IP Address untill my app stops.
I am trying to create a slot machine application. I wanted to make a handle like gui so here is what I have:
[URL]
What I want is to be able to let the user drag the red button till a certain point and when they let go of the mouse click the button moves back slowly to the top.Here is what I have so far (I tried my best) :
Private Sub picBall_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles picBall.Click
tmrOne.Enabled = True
tmrTwo.Enabled = True
[code].....
I am a sys admin for a company and our programmer left several months ago. a program they wrote is now failing and i am struggling to work out why. the program basically pulls data from a csv file into a readable form, written in visual basic. the application works on a couple of machines but not on a couple of others. i have matched up .Net framework versions, MS Primary Interop Assembly versions, still no joy. As the app works on some pc's i am wondering what other differences could cause this?
The error output is:
see the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CODE:
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
For example:
CODE:
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
I have an application that receives data input from an automated set of devices. This data stream I have managed to capture & get it into a list box which I can sort based on the Device ID & the time that the response was received.There is a set time window for the devices to transmit their data into the application and during this each device is not limited to the number of responses it can send (ie :- Device 1 can send in 2 responses where Device 3 can send in 40 responses, etc).All of the responses are captured, listed & sorted within the listbox (this bit is working ).I now need to extract the last (ie:- latest) entry in the listbox for each Device ID & this is where I am stuck. I can retrieve the last item in the list but cant seem to extract the last item for each Device ID.[code]
View 2 Replies