Install A .NET Windows Service - This Is Not Available In The Client's System?
Feb 8, 2006
I have written a VB.NET windows service application. I installed it in my system using the Installutil.exe. But this is not available in the client's system because the .NET is not installed in that system.Is there any way to install the .NET windows service application without the Installutil ?
View 4 Replies
ADVERTISEMENT
Jun 22, 2010
Is it necessary to install .net on client system to run .net application?
View 1 Replies
May 4, 2009
I have converted a Windows Forms VS2003 application to VS2005 and then to VS2008. It includes a setup project for deploying on the client computer (the regular installer, not click once). It works fine when I run it on my computer, either in VS or if I install using the setup installer. But when I install it on the client computer and then try to run it, I immediately get a System.InvalidOperation exception. I put in debug code before my code but it fails before it gets to any of my code. Both computers are XP. The client comptuter actually has VS2003, though it is not used.
I have tried it with either the 2.0 framework or the 3.5 framework (and included those as prerequisities) but neither makes a difference (and I did set that in the Launch conditions, as well as in the Advanced Compile Options). The application uses CrytalReports for VS.
I don't think I can run JIT debugging on the user computer due to permission issues. Are there any other debugging things I can try to narrow this down or has anyone encountered this.
View 1 Replies
Mar 4, 2010
I have developed a windows application which connects to Oracle Database and upload and retrieve data (using System.Data.OracleClient). It is working fine in my developement system. When I build a setup and deploy in another system, it is giving error that Oracle Client is missing.
Do I have to install Oracle Client in the client system to run my application?
(When I visit Oracle site for Oracle Client, it is asking me to download a 200 MB file)
Is there any other way to do this with out installing Oracle Client in the client system?
View 4 Replies
May 3, 2012
i am doing school software projects in windows application. now i want to install. this project to my client place. i can able to convert my application in to EXE using setup project. The problem for me is the database. i am using sqlserver 2005. i don't how to install my database and table into the client computer. is there any way to copy the database. if anyone have any idea about how to install my database i have create for that application into client computer.
View 1 Replies
Mar 10, 2009
I've created a windows service and started a deployment project for it. I have the project installer class in the service project and I've added the "Standard output etc.." from the service project as custom actions for the Deployment Project. When I attempt to install it, I get the error "Specified service already exists", which shouldn't happen (even though the service does exist) because the installer should be removing the old service and installing the new one.
I've checked that the versions are different, and that the Product Code is also different, also RemovePreviousVersions is set to true. Can anyone tell me why it isn't uninstalling my old service when I update then install again? .S: MODS: DO NOT MARK MY POST AS ANSWERED, IT IS RUDE, YOU HAVE NO IDEA IF YOU'VE ANSWERED MY QUESTION!Sorry, it gets ignored in my signature.Mods
View 8 Replies
Nov 19, 2008
I have developed a Windows service. During the installation, I get the following warning/error:�Cannot start service from the command line or debugger. A Windows Service must first be installed (using installutil.exe) and then started with the Server Explorer, Windows Service Administrative tools or the NET start command.�
I am not trying to start it. I am only installing it (right-click from setup project). The StartType is set to Manual, and the Service Process Installer account is set to User. I do not get prompted for the service login credentials.I am using Visual Studio 2005, VB.Net running on Windows Server 2003 SP2.
View 1 Replies
Oct 19, 2010
I've developed a simple Windows Service basically from following tutorials. However, when I go to add it the list of Services using the "Install Util", I get the following results and have no idea what it means.[code]
View 4 Replies
Jan 30, 2012
I have created a windows service in vb.net. Is there anyway i can create an installation for it that does not require installutil to be used?
View 3 Replies
Dec 18, 2010
I was reading how to install a windows service by using InstallUtil but is there a way to install it within the form and not use the visual studio console?
View 2 Replies
May 19, 2009
I will be googling this but in case I don't find it easily, here is my question - how do you install a windows service that you've developed on your own PC to a server? Is there an option to produce the package (I thought it was an msi file) which you can run on the server?
View 1 Replies
Apr 27, 2009
I've been busy with work and other bits and bobs and not really had much time for programming... but anyway, I have just written a fairly simple windows service in VB.NET and although I can install it on my PCs/servers using the command line InstallUtil.exe component, this isnt ideal for other people that may need to install it without my assistance.
So basically I just need to know how to get a normal Setup and Deployment VS project to install this service itself... I thought it would be as simple as selecting the service assembly to include in the deployment project and building it, but unfortunately that seems to do naff all. Do I need to use a 'Custom Action' in the setup project (and if so, how/what do I do?)
View 6 Replies
Jan 4, 2012
I need to install a windows service via an .msi for many tablets which is nooooo problem. The problem is, the tablets currently have the service running which was installed by installutil. So when my installer runs, regardless of Remove Previous Version is true, it stops stating the service already exists and to uninstall it from Add/Remove Programs.So I wrote a console app which preceeds the primary output as follows:
Sub Main()
Try
Dim filename As String = "C:Program FilesRSCProjectServiceSetupRSCProjectService.exe"
'Dim filename As String = "C:RSCProjectServiceRSCProjectServiceinDebugRSCProjectService.exe"
If System.IO.File.Exists(filename) Then
[code]....
View 3 Replies
Jan 22, 2012
I'm trying to build a multithreaded SMPP client with VS2008 and I'm getting bogged down in threading. Basically my main parent thread will interact with the windows service scheduler, get registry settings, and get a list of SMPP servers to connect to. Then it will launch a thread for each SMPP connection, which will need to keep it's TCP socket open to receive messages with, so the thread must remain running even if there aren't any events happening (no messages to receive)... but I can't seem to get it figured out.
[Code]...
The Start sub in the oChannel object does run, but once that sub is finished running the thread ends. In the Start sub, it calls other code that initiates a connection to the remote SMPP server, but that code asynchronously waits for an event to be raised regarding the connection status. Once the sub finishes, the async connection being attempted doesn't seem to be able to pin the thread down.
View 3 Replies
Sep 2, 2010
I have a service projecwith a deployment project in a solution. The installation is successful, service runs ok. However each time after installation I will have to use ervices.msc to start up the software or restart the machine, any idea how I can start the services as soon a
View 3 Replies
Jun 5, 2009
I'm trying to make a LAN IM client using the net send command and I was wondering if there is any way to capture the text of the messages received through net send and display them in a label.
View 6 Replies
Mar 27, 2010
can i install a software made in VB6.0 at windows embedded operating system.........
View 1 Replies
Nov 17, 2011
Im trying to create a windows service with vb.net but when I run: InstallUtil.exe myservice.exe
I'm getting the following error in the MyService.InstallLog file: Restoring event log to previous state for source DebtorInvoiceMailingService.An exception occurred during the Rollback phase of the System.Diagnostics.EventLogInstaller installer. System. Security. SecurityException: The source was not found, but some or all event logs could not be searched.Inaccessible logs: Security.An exception occurred during the Rollback phase of the installation. This exception will be ignored and the rollback will continue. However,the machine might not fully
DebtorInvoiceMailingService.vb
Imports System.ServiceProcess
Imports System.Timers[code].....
View 1 Replies
Dec 17, 2010
I'm trying to deploy a service created in VS2010 and am continually getting this error, along with the description that is expecting an application manifest, when trying to use installutil (.net 4.0)to install the service.I've developed the service both in a 32 and 64-bit environment, and tried installing in both a 32 and 64-bit environment. This does not seem to have an effect.
View 9 Replies
Jan 26, 2011
I figured out that i could use Dim serv() As ServiceController = System.ServiceProcess.ServiceController.GetServices(".") to get my services.
Now i want to set (change) the depending services for some.
how to use DependentServices.SetValue.
View 3 Replies
May 1, 2012
Set objService = objWMIService.Get("Win32_BaseService")
objService.Create("usb2", "usb test", "c:usb2.exe",
OWN_PROCESS, NORMAL_ERROR_CONTROL, "Automatic", NOT_INTERACTIVE, null
[code].....
View 1 Replies
Sep 24, 2009
I've seen loads of programs that use an icon in the system tray to let you interact with a windows service that is running on your machine but I am curious as to how this works. As I understand it, unless a service marks itself as 'interactive' then it has no way to communicate with the user's desktop and doing so is discouraged by MS (and even causes an alternate desktop to appear temporarily in Server 2008 in some cases). So I want to try and avoid doing this but I cant think how else I would do it, and even if I marked my service as interactive I'm not too sure how I could actually get it to show a notification icon in the system tray.
I assume I would have to use Windows APIs, unless just using the windows forms NotifyIcon class would work. I considered just having the system tray icon in a totally separate application that just communicates with the service via named pipes or TCP etc but I'm pretty sure this isnt how other programs do it because with most of them if you just kill the process that the service is running in then the icon disappears so it must actually be directly running from the service.
View 9 Replies
May 3, 2012
one of the apps that I wrote a couple months ago is getting to be rolled out to my production floor; one issue tho - It works great as a standard executable (you double-click, it starts and waits for data), however, I cannot get it to start as a system service.
I've already done a little bit of research for how to create a system service, but most of the information that I've come across is point to VC# or Visual Studio 2010 - I'm not finding much for VB 2010. Additionally, I'm only using VB 2010 Express and I'm pretty sure that I don't have the Windows Service application template's on my PC.
My application does have a "UI", but there isn't any user interaction; it starts and just sits minimized in the system tray polling a directory for the existence of a file - i.e. the windows form is not required.
View 1 Replies
Jan 23, 2012
I have created a windows service in VB in visual studio 2008. The purpose of this service is to copy files from one network drive to the UNC path for a sharepoint file location. It works properly on a Windows XP machine, however when I installed it on Windows 7, I am now getting Access Denied error messages. In troubleshooting, I tried to simplify things to see if I can see the directory that I'm trying to write to, and the System.IO.Directory.Exists is returning false. I am able to see other netowrk shared drives, just not this particular one, and it appears to only be an issue from my Windows 7 machine, as I can do this with a Windows XP box.
I have also tested this code in a Windows forms application and it will work as expected. It appears only when I move to the service.
View 2 Replies
Sep 27, 2010
I had a problem getting a VB.NET web service client to receive the response object from a Java web service.In the process of posting this question someone from another department volunteered some code written for a similar situation.I couldn't find this anywhere on the net so I'm completing my question to help others out.[code]The web service is Apache CXF with some Spring elements mixed in.
View 1 Replies
Aug 27, 2010
While trying to install my application, when system tries to install .Net Framework, it gives an error.Is there any source where I could download uninstalled .Net Framework 3.0 and provide my clients with application?
View 1 Replies
Jul 14, 2011
i have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
View 1 Replies
Mar 16, 2009
With the following imported namespaces in my project :
Imports System.Windows.Forms
Imports System.Reflection
.. I cannot add..
[code].....
View 6 Replies
Jun 9, 2011
my database on sql server 2005.my application is completely working in my computer.but on other machine sql server 2005 login error.sql server does not allow remote server.please how can i load my application on other computer.
View 3 Replies
Mar 15, 2010
I got this warning that I don't know what it means.Warning1 The service System.ComponentModel.Design.IInheritanceService already exists in the service container.Parameter name: serviceType00
View 2 Replies