Keep Scroll Bar From Disappearing?
Sep 15, 2011
When my full-screen sized Form is reduced in size by clicking on the "restore down" [i.e.] not to the minimized size but to in-between max and min, the scroll bar disappears. Is there a way to keep it automatically from disappearing [i.e.] to keep the scroll bar in view and available for use without having to make an adjustment to bring it back into view?
View 12 Replies
ADVERTISEMENT
May 22, 2012
I have a tab control with two tab pages. One page has the auto scroll enabled since there is to much content in the page. The middle mouse wheel doesn't scroll the scroll bar; I have to actually click and hold the scroll bar and drag it down to scroll. Is there a property to allow this?
View 2 Replies
Nov 11, 2010
I am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private
Sub scrHoriz_Scroll(ByVal
sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
View 3 Replies
Aug 5, 2011
I have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
View 1 Replies
Jun 12, 2011
I am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
View 4 Replies
Jan 6, 2010
How would I leave the vertical scroll position as it is and set the horizontal scroll position all the way left if it isn't already in that position? I've been using Me.AutoScrollPosition and have come up with code that is satisfactory but I haven't been able to always leave the vertical scroll position exactly as it is and just move the horizontal scroll position to the left limit.
View 4 Replies
Mar 13, 2010
I have a textbox that shows events on a program, which I add. I use the 'scroll bar' option on the textbox to show the vertical scroll bar, but how do I make it stay at the bottom most possible? I am using this code while I am trying to learn how to do what I want the scroll bar to:[code]But how do I get it so the scroll bar will stay at the bottom-most it can? I'd like the newest, most recent events to appear at the bottom of the textbox, and to have the user not have to scroll down every time something new is added.
View 2 Replies
Aug 19, 2009
i have 2 controls on a form. Panel1 and picturebox. I am using the following code to zoom in.
PicBox.Width = PicBox.Width + 100
PicBox.Height = PicBox.Height + 75
'PicBox.Left = PicBox.Left - 50
'PicBox1st.Top = PicBox.Top - 20
i am also using the following code to try and scroll whilst zoomed in
Inherits System.Windows.Forms.Form
Private m_PanStartPoint As New Point
Private Sub picbox_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PicBox.MouseDown
'Capture the initial point
[code]....
I have set the panel to autoscroll and added scroll bars but they do not scroll far enough... They only scroll about 2cm.
View 6 Replies
Dec 10, 2009
Following default the datagridview will scroll following vertical. How can i do that. I tried :
DataGridView1.ScrollBars = ScrollBars.Horizontal but not work
View 2 Replies
Oct 27, 2010
I have a project in which the comboboxes above the code window, below the tabs have disappeared. If I open and close the project, they do not appear. If I open another project, they do appear. As soon as a open the project where they do not appear, they disappear.
View 5 Replies
Apr 7, 2011
I create a cookie and it has the proper expiry set, but when I go to update the cookie and check it with the debugger the expiry is gone.
' Cookie Helper: Updates cookie with the selected source ids
Protected Sub UpdateCookieFor(ByVal cookieName As String, ByVal sourceIds As String)
' Update cookie if it exists
[code]....
View 1 Replies
Feb 14, 2010
I can't understand what I am doing wrong ... I have a form on which there is a label . This label is actually part of a control array of labels (it was created by the migration wizard trough the upgrading process) . Each time I run the program and call my form , a message appears saying :Control array element 12 doesn't existAnd this is what I don't understand .I can see it during design time , how come it disappears during run time ? I have even checked its Index property , it's 12
View 3 Replies
Feb 27, 2008
I have a vb.net 2005 windows form with a menu strip that keeps disappearing both in design mode and when the program runs. I noticed that on other forms there are more properties listed for the menu than this one has. Anybody familiar with this problem?
I am using a split container with docking set to full below the menu but several other programs are set that way without any problems.
View 8 Replies
Nov 29, 2010
I have a panel on my GUI with radio buttons. When I run the code to determine which is the checked radio button from that panel, the code runs fine, but the panel disappears from the GUI after that. Here is the code I have to determine the checked radio button:
Dim rbName = (From r As RadioButton In Panel1.Controls.OfType(Of RadioButton)() Where r.Checked Select r.Name)
System.Console.WriteLine(rbName.First)
I have tried using:
Panel1.Visible = True
and also
Panel1.Show()
Panel1.Refresh()
but it doesn't show the panel again. I tried the same thing for individual radio buttons such as RadioButton1.Visible = True and it doesn't work.
View 2 Replies
Apr 12, 2012
I have a bound datagridview and a dataset with tables.
I have two sets of comboboxes bound to the same field "Restaurant" in the tables (mirroring each other).
In the "NewEmployeeRestaurant" combobox I change the value and it reflects in the datagridview. I can shoot around clicking all over the datagridview on other employees, but when I return to the employee I changed, the value remains what I changed it to. All is good in the world.
However, when I go to the "EmployeeRestaurant" combobox with the same settings, I change the value and it is reflected in the datagridview. So far so good. But when I go to another employee then click back on that employee I changed, the datagridview still shows the new value but the combobox is empty! NOT COOL!
View 1 Replies
Jul 20, 2010
Me.Show()
Me.WindowState = FormWindowState.Normal
nfi.Visible = False
[code].....
View 3 Replies
Oct 18, 2010
I have a project where the dropdowns for the Form and controls (left side) and the events (right side) aren't available. I can re-boot, open and close the project or solution and still they do not show. They do show for other projects.how to make them come back?
View 3 Replies
Jul 29, 2011
When one of my students opened his project yesterday, the Form he designed for it was no longer available. He could run the program but he couldn't edit the form as it had disappeared. Later he couldn't run the program at all as the error said that the form name wasn't part of the WindowsApplication. What's going on?
View 4 Replies
Apr 25, 2012
Ok, getting a little frustrated. I'm a new VB programmer (just a few months). Let me show you the start of my code so you can see what I'm trying to do:
Public Class Form1
Dim crude1 As Double = 0
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs)
[code]....
View 4 Replies
Mar 16, 2011
I am using VS2008 on Windows XP SP3. I have a form with two pairs of dependant comboboxes which are bound to a SQL database table. In each pair, the second combobox's choices are dependant upon the selection of the first combobox.
Both pairs of comboboxes behave as expected. However, when I use the binding navigator to look through other existing records, the text in the second pair of comboboxes disappears on records that already have selections.
The database table still holds the information, but it just doesn't display in the combobox. Again, this only happens on the second pair of comboboxes, not the first pair and both sets of comboboxes are set up exactly the same (albeit on different tables).
View 7 Replies
Feb 6, 2010
We have a question regarding VB.Net 2008. We are used control array in vb.net and third party timer controls. When handle received from external application to timer control event procedure, after this form becomes blank and controls disappear. What we have to do to persist the controls.
View 1 Replies
Jul 8, 2009
I am using Visual Studio 2008.
I have my project set to "Copy if New"
I created a form with variuos fields from a table.
I hit F5 to run the application and enter in test data and save.
I exit the project and then go back in and the new data is there.
I exit the visual studio 2008 completely and then go back in and the new data is there.
I did the above last night several time and the new data was always there.
This morning all of the new data I entered is gone... I have NOT changed the data base schema at all.
View 4 Replies
May 19, 2011
I am developing a VB.NET program. I currently have an ASP Textbox with a label showing inside it. But now the customer has to manually delete this label before entering their own text. How do I get this label to vanish as soon as they begin typing? My script is nearly working now for txtFind. But in this case, it shows a different textbox to display watermark image. How can I reset this watermark to only activate the txtFind textbox instead? And to remove the textbox on left-hand side?
Here is my new ASPX file code:
<script type="text/javascript" language="javascript" >
function GetChart(thepart, thepartdesc, thecolor, row) {
Form1.part_transfer.value = thepart;
Form1.part_desc_transfer.value = thepartdesc;
Form1.submit();
[Code] ......
View 3 Replies
Jan 26, 2011
I have a ListView that I am using to display specific data. In most of the columns, I have images that represent supported types. When I add these images and build the project, they go away.It worked for a few weeks until they suddenly disappeared.
View 8 Replies
Feb 2, 2012
With .Net 3.5 / VB 2008 / WinXP...I'm using a Listview control in Details view. Two columns with an image on the left and text on the right. FullRowSelect is set to true. All works fine except that in the selected item the image is not visible. It's replaced by a white background. I need the image to be visible within the selected ListViewItem's blue background. Do I need to switch to OwnerDraw or is there another way to keep the image visible?
View 4 Replies
Sep 19, 2011
Within my webpage I am loading usercontrols within a placeholder. Each of these user controls triggers a postback when an ajaxcontroltoolkit rating is changed. The problem I am having is that if I use [code]The Load_EvaluationList is what loads the user controls, if I place the IsPostBack check around those two, the controls disappear, what could be the problem
View 3 Replies
Jul 22, 2010
I'm usually a LAMP developer, but some .NET work has arrived. If I run the following code:
<% poundsign = "£" %>
<% Response.Write poundsign %>
<% Response.Write "£" %>
Nothing is displayed. However, outside of the <% %> tags (i.e., in the HTML) £ displays correctly. I have no trouble displaying the usual alphanumerics, it's just the £ sign that is proving problematic. The underlying file is in Windows 1252 encoding, and I need to serve it as such. If I save the file as UTF-8, I get mojibake instead of a £. What I can do to make this work, or any settings that might be preventing it from working (other than saving the file in a different format)?
Aside from the fact that my £s aren't appearing on the page, a major part of my problem is that I need to insert strings containing £ into a SQL server database, but if I form a SQL INSERT statement within the ASP, none of the £ signs end up appearing in the database. Inserting £ signs into the database from ASP isn't a problem when I save the .asp files as UTF-8 files, but I need everything to work in Windows 1252 encoding.
View 4 Replies
Dec 30, 2011
I have a solution built of 3 projects:
View 2 Replies
Apr 21, 2010
I have a windows forms application built in VS2005 and migrated to VS2008 that I "inherited" that occasionally will not show some of the objects (i.e. a button or something) when a user runs it. This is sporadic and does not seem to have any notable pattern.Are there any specific types of things I should be looking for that might cause such behavior? I tried looking at available memory and hard disk space issues and that did not seem to have any bearing on the problem.
View 5 Replies
Oct 27, 2010
I am using datetimepicker control.
Initially I am setting
DateTimePicker1.CustomFormat = " "
DateTimePicker1.Format = DateTimePickerFormat.Custom
[code].....
View 1 Replies