I have been scratching my head for a while on this, but not sure if it can even be done. Basically I tried the listbox_doubleclick event but that did not suffice. I am looking for something to use that can run my code when an item in the list is double clicked.It works with the listbox_doubleclick as should, but the problem with this is if I double click the listbox anywhere, it will run the code for the selected item.
View 16 RepliesI'm trying to open a second form by double clicking selected item that are shown in listbox.
View 20 RepliesSomeone asked me to add a function when the notifyicon is doublcliked. I figured that'd be easy with the mousedoubleclick event being available. I find out that then both the single and double will then be called. Well that sucks, I want it to only do the one the user requests. So I tried to get it to work:
Private Sub DblClick_Tick(ByVal sender As Object, ByVal e As System.EventArgs) Handles DblClick.Tick
[Code]...
I am getting very frustrated with how this was set up. When you are trying to navigate and move things on your form and accidentally double-click, it adds a sub procedure On-Click to the form, then you have to waste time and delete that segment and get back to your workspace.Does anyone know is there an option in the UI options somewhere to change this, so that when you double click it doesn't perform that way? I would like to set it to CTRL-Double click if possible, it would make the program a lot more user friendly for m
View 4 RepliesAlright im trying to make it so when someone double clicks on a node lets say node named form2 it will then show form2 and form1 will hide. How to do this?
View 1 RepliesIs there a function in a data grid where when i double click the item, it will automatically be written in a text box outside the grid?
View 2 Repliesi have been working on an app, that remains just my preset sizes. recently, i have discovered that by double clicking the form title bar, even w/the formborderstyle being set to fixedtoolwindow, the form still maximizes and all of my controls remain in the top/left corner.. not a good view.. so, i set the maximum size of the form, and now when double clicking it, moves it to the top/left of my desktop.. not a good result. here is a quick sample to start w/.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
how do i permanently block the double click on the title bar, to have no effect on the form? i do not want to end up w/having to create a borderless form just to avoid this..
how do i delete a certain row by either double clicking it or by means of another form.
View 2 Repliesi created a notify icon for my application...whenever i minimize my app,it will go to system tray.. how to restore my app BY double clicking on my notify icon?
View 8 RepliesI'm trying to finish up Visual Basic project for a class to create a playlist of files and to have them played.I have everything working if I single click the item from my list, and then click the play button in the WMP control portion of my form.I then want to add the functionality of double clicking the selection in the list and play with the following code:
[code]...
and nothing seems to happen.Digging into values of the debugger at the time I try to play the file:
[code]...
The sourceURL of the first item in the playlist is correct, but the duration is 0:00 (it should be 0:01). Since it seems there is no duration detected, nothing is played. Any idea what I missed? Again, if I single click the file, which sets the playlist as I want, then click PLAY on the GUI controls, it works fine.Also, is there any way for the program to detect when the song has changed when playing a playlist of multiple songs? I want to have label fields showing "Now Playing" information that would change info as the songs change, and maybe even change the item selected as things are played. I've not yet found a way to detect this change, only when the player starts and stops in general.
I was wondering if/how I can get my program to open a file as if I were to navigate to it in windows explorer and double click on its icon.
View 3 RepliesHow is it possible to open files (*.lva) made with my application by doubleclicking on them, as I can open MS Word etc files.My files are saved using StreamWriter member WriteLine.When I doubleclick on file made with my application, it has to fill some textboxes.I can open files through my application using ReadLine command, but not doubleclicking on them.I use Inno Setup Compiler to install my program and I'd like to associate *.lva files to open with my application.
View 17 RepliesI would like to fire an event when double clicking on a listview, but more specifiquelly in the blanck area (where NO item exists)I have read from this msdn page :
Quote: The mouse pointer must be over a child object (TreeNode or ListViewItem). how to fire the event another way ?
I am trying to learn Visual Basic and am working through a text book that my son used for a class. Each time I create an event handler by double clicking on the design page, the code that automatically populates is almost identical to the code in the book, except the byval portion is omitted from the code.[code]
View 2 RepliesI didn't get the result I want from the following code:
Private Sub tblView_SelectionChanged(ByVal sender As System.oject, ByVal e as System.EventArgs)Handles tblView.SelectionChanged
Dim st As String = tblView.SelectedRows.ToString
[Code]....
I wanted the data I selected on the datagridview row to be display in the textbox, but it displays the error message that st(0) produces "S" which is incompatible to my RackID data type.
I have a login page, which a user will have to enter username, password and accesslevel. Accesslevel is either 1 or 2. 1 for admin and 2 for users who are restricted from using certain functions. I have this module set up so that I can make use of the accesslevel throughout the forms that I have.
Module ModuleAccessLevel
Public AccessLevel As Integer
End Module
Arjun taught me how to make use of this module, so now I know how to restrict users from using certain buttons, toolstrips by doing the following:
[Code]...
how I could code a datagrid's double-click event to have the value in the cell show up in a textbox.
View 5 RepliesAfter inserting an user control and double clicking on it, a stub with the default event should appear.
If I don't define what the default event is and I don't assign any attributes to any events or properties, it works, and it generates the stub for the UserControl.Load event (the default default event).
But if I set some attributes for the properties and events and/or I define the default event, the stub generated is corrupted. Here is an example of what I should get:
Private Sub FaceSelector_OnSelect(SelectedObjects As System.Collections.ObjectModel.Collection(Of Object)) Handles FaceSelector.OnSelect
End Sub
And this is what I actually get: Private Sub SketchSelector_OnSelect( SelectedObjects As System.Collections.ObjectModel.Collection`1)
End Sub
Private Sub FaceSelector_OnSelect( SelectedObjects As System.Collections.ObjectModel.Collection`1)
End Sub
In this case I had 5 user controls, I double clicked on one of them, and I got 2 corrupted stubs.
Sometimes the corrupted stubs are generated when I change some properties of other controls in the form, or the form itself. For example I resize the form, the error window doesn't show any errors, hit F5 to compile and run, and get a syntax error.
I tried to track the problem down by removing each event/property attribute/xml description, one by one, many times I thought I found the culprit, but after 10 minutes the problem popped up again.
I have an ArgumentException was unhandled message: Cannot add or insert the item '1' in more than one place. You must first remove it from its current location or close it. Parameter name item. Note: Have 2 listboxes 4 textboxes double click listbox2 and it fills in the four texboxes (now it needs to put it back into listbox2 in the same place it came from but crashes. I marked the area and underlined where the error message was coming up. So double click a selection in listview2 (fills 4 textboxes) then double click textbox2 (should return text data back to listview2 in same spot) but crashes. See code below.
[Code]...
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting?I don't want to type those event handler subroutines every time!
View 1 RepliesThe title pretty much precisely asks the question, but I shall repeat;
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting? I have used '/resetsettings' already, and other answers to similar questions do not solve my problem. I have reinstalled, gone through every menu I can find (though I may have missed something)I don't want to type those event handler subroutines every time!
I will include a link to a copy of my source Code. The Problem is that I have to create a user management system. I have almost all my features working but there are one or two I can't get working. When the program loads a text file is read and the program lists the first name of everyone in the text file into a list box. I want to be able to get so that when you click a name in the list box, the persons information will be displayed in the text boxes to the left. And also when you edit those text boxes you can click the button for modify current and it will modify that persons data. The other problem I'm having is being able to search that text file for the users e-mail and return the first names of people who have that e-mail into the listbox.
Link to Source Project: [URL]
We have a rather large VB.NET accounting application that crashes occasionally for some customers. I have now been able to reproduce this particular almost 100% in my test nvironment using certain data. The crash happens when clicking a list box after printing a report. The form involved has a list box listing available reports. You select one or more reports from the list box and click the print button. After printing, if you click the list box again, the program crashes, with an exception that does not seem like one VB.NET should even be able to produce.The exception message is: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt."The call stack is:
1. System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
2. System.Windows.Forms.NativeWindow.DefWndProc(Message& m) [IL offset: 0x3e]
[code]....
On my form is a listbox whose items - when clicked - will execute a separate vbscript file (for WMI) and display the results from the WMI in a multiline TextBox that's read from a text file.
My problem is that I have to click an item in the ListBox twice to view the WMI results in the textbox. It's like 1 click executes the vbscript, another click writes the results to the textbox. A third click does both.
All the activity (retrieval of the target computer, creation/modification of text file, execution of the vbscript and writes to the TextBox) happen in the SelectedIndexChanged event handler.
I have written an application using VB 2005 Express. It's a very simple application. There are basically two listboxes, one to the left and the other one to the right of the GUI.Listbox1 contains a list of names. When you double-click each name, a code word is created and added to the listbox on the right. Now... here is what I want to do. I would like to automate the double-clicking process with the click of a button so that each name on listbox1 is double-clicked in sequence
View 6 RepliesI have to make a listbox with a few(8) names in it & double clicking on a name in the listbox will removed the name from it. I have already add the names into the form using the listbox.items.add method & would display the names in it. Then I enter the coding for 8 names in double_click procedure (listbox) using the "listbox.items.remove" method. However, when I try double clicking on a name in the listbox, it would remove all the names instead.
View 2 RepliesI have a listbox that has url's in it what I'm trying to do is open this url's from listbox by double clicking selected url
View 8 RepliesWhat is the best way to msgbox the text of an item in a list box when the listbox item is double clicked on?
View 6 RepliesWhen the user clicks the Exit button it closes the forms and if there was an open file it asks the user is they would like to save. But after the application closes there is still memory being held in Processes by the application. However, when pressing the [X] in the top of the form the application closes again but in this instance it is not held in Processes. How do I write the close for Exit to take into account how the [X] works and close the application cleanly?
Friend Sub CloseAllForms()
CloseHelpForm(True)
CloseDiagForm()[code].....
I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?
View 2 Replies