I am not sure why my dataset is not being posted into datagridview
Sub to load the form and datagrid view
Private Sub btnMueME_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnMueME.Click
[Code].....
I am creating XML files and load them back again. I use this following code to write xml to a folder. the code below will put date and time to the file name. and this code works fine.[code]...
Again, I want to load the last xml file back and put in a dataset. I normally write code like [url]...
I have the following function: Public Shared Function GetLookupTableData(ByVal TableName As String, ByVal WhereClause As String) As DataTable
[Code]...
With one xml file it loads the schema and data just fine, but with another xml file it only loads the schema and not the data. There's no error thrown - just no data loaded.
Anybody have any ideas? I've attached the .xml file for your review. I would have attached the .xsd but the system wouldn't allow it.
so what I want to do should be pretty simple. I've been following the examples found here Using the BackgroundWorker Component - VBForums . I've been successful, but I'm not smart enough to put it in my project.
What I'd like to happen is this
1. I hit a button to load data from a dataset....
2. have a progress bar show until this action is complete.
The main problem is that I can't figure out how to tie the "progress bar" to the action of "pulling the dataset"
I'm sure this is a crazy question for you all, but hey...
Would I put all of the coding in the button_Click sub?
I have a comma delimited text file. I need to write this file to xml. I was thinking of first loading a dataset from the text document and then working from there. Is this a good way to go about it?Also how would I load the dataset from a comma delimited text file. The text is enclosed in quotation marks which I want to be removed
View 7 RepliesI want to load minimum 150MB of XML into dataset,
simple way of doing that is
XmlDataDocument xmlDatadoc = new XmlDataDocument();
xmlDatadoc.DataSet.ReadXml("C:\books.xml");
But i feel on Lagre size message this code make some performance issue.
I want to load minimum 150MB of XML into dataset,simple way of doing that is
XmlDataDocument xmlDatadoc = new XmlDataDocument();
xmlDatadoc.DataSet.ReadXml("C:\books.xml");
But i feel on Lagre size message this code make some performance issue.
I have returned xml data in a variable and need to loop through the returned xml and pull certain data from select nodes.
I was thinking the best way would be to load into a dataset (or datatable) and loop through that.
I also have the xmlschema. What's the best way to code this?
I thought I could do something like so but it gives me the following error: DataTable 'newdt' does not match to any DataTable in source.
[Code].....
I want to load an xls file to dataset, edit the data, and import them in mysql.My problem is that I can't load the file. It seems like it ignores the file completely.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmd1.Click
Dim MyConn As OleDbConnection
Dim myPath As String = "C:TempManinLottery2009.xls"
[code]....
I've only dealt with firing a single SQL statement at a SQLServer table and returning a single result... easy....
however....
is there a way to fire a dual sql command and load the results into respective tables within a dataset?.. I'm thinking something along these lines (this code of course does not work)
Dim ds As New DataSet
Dim dt1 As DataTable = ds.Tables(0)
Dim dt2 As DataTable = ds.Tables(1)
[Code]....
have a lot of experience with LINQ, but should your verb be attached to the array?
data.Tables("people").LoadDataRow(parsed(int1, 1), True) S/B
data.Tables("people").LoadDataRow(person.parsed(in t1, 1), True)
How do you load a variable directly from a db record entry Thought it would be something like this
Code:
Dim TempUserName as string
Me.TblUsersBindingSource.Movefirst
TempUserName= Me.TblUsersBindingSource.List("UserName").Tostring()
Apparently not....
I dont know how to dynamically populate a dataset based off the tables in an existing database.Once I can get the dataset to populate, I can then move forward with the next step of the project.
View 1 RepliesIn the below code, it is supposed to load the data from the dataset, into the table, so that I can view and navigate the records.My problem is, that when the statement runs, it errors with:
System.Data.ConstraintException was unhandled "Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints."
Here's the code:
[code]...
I'm still in my novice stages of .net development, and I think I may be trying to make something too complicated.In VB.Net 2008, I'm using a SQLDataAdapter to Fill a dataset with records being returned from a Stored Procedure (SQL Server 2005).I'm using that dataset as the datasource for a gridview. Up to this point, everything is great and I understand what's happening.I'm getting ready to make my first-ever attempt at updating the data in thegridview and then pushing the updates back to the SQL dB.Here's where I'mgettingconfused...to cut to the chase, what's the simplest way to load the updates back into SQLServer?
View 2 Replieshow to load a XML file Embedded in the resource project?
I've do some google, but did not found anything useful
I've place my XML document in the project resource, and I wish to load it in a DataSet/Datatable.
i want to add the last row of the dataset but it is only displaying System.Data.DataRow in one of the colums
con.Open()
cmd = New SqlClient.SqlCommand("select product,Quantity,MRP,Sale_Rate,Disc_Amt,Amt from sale_table ", con)
[code].....
I have a datagridview that is linked to a bindingsource....which is linked to a table in a dataset. (and i have tried it with the datagridview linked to the dataset and table directly).
When i make edis to the datagridview, and check the DataSet.Haschanges, it returns false.[code]...
is it possible to add two defferent datatable (single dataset) into datagridview? what I mean?I have a datagridview and one dataset with two datatable. here on the datagridview, I have 3 columns on datagrid as (code, name and unit (combobox)) first two from table 1 and 3rd from table2. there is relation between table1 and 2 (code). so, in combo, I have to fill the unit depents the column1 (code).
View 4 RepliesI have data that I'm taking from an Excel sheet with the ultimate goal of displaying in a DataGridView.
Currently I am just going over the UsedRange of excel data and plugging it into a datagridview. This works fine, but can get bogged down when there 100+ rows of data.
I have also toyed with going from excel into a dataset (using the same wasteful method), and as expected it takes about the same time to load the data. Maybe use the XML from the Excel file?
EDIT:
Some Additional Information:
This is a WinForms application and the user will be picking and loading the excel file at run-time.
EDIT
The Return of Some Additional Information:
The Excel file is located on the user's pc. The general assumption is that they will be loading different files each time they use the application. [not sure if this helps, but might be good to know :)]
Okay so I have a datagridview that is bound to a dataset. I have a column called type is a string char of either C, R, A, or V. The problem is that I want to sort the datagridview rows using that column and do so in the order I just gave so I want rows with C on top and then R and then A and then V. Because these aren't alphabetical, how could I sort the items this way? I did look into the icomparer, but really wasn't able to figure out how that works.
View 4 Repliesmy question is, is there a way to filter records in the dataset and use that records to fill in the datagridview? for example, a datatable (with 3 columns: ID, StudentName, Gender) is filled with list of students. i have two datagrids in the form namely DatagridView1 and Datagridview2. DatagridView1 is where the the list of student where Gender is equal to M and DatagridView2 is where the the list of student where Gender is equal to F.in my current solution, i am using a loop.
[code]...
is there a way without using a loop?
I have a data bound datagridview where I am allowed to add and delete rows.So a new row is the last row in the grid with the '*'. When a user starts to type in the new row, that row no longer is considered the new row. It is then inserted into a row above the new row (*). The user, however, can press 'Esc' key and this row gets deleted.If the user does not pressed 'Esc' but move the cursor along that row, this row will be permanently there. I have tested this scenario and check the underlying dataset and it registers no changes as in the myDataset.hasChanges=FALSE.If I call myDataAdapter.Update(myDataSet), nothing gets updated. How do I save this row to the database?
View 2 Repliesthis code that i use just update the datagridview not update at dataset..anyone can tell me what wrong with my code.
Dim mResult
Dim ObjConnection As New SqlConnection()
mResult = MsgBox("Are sure want Update this record?", _
[Code].....
I have a datagridview on a form that is bound to a table in a dataset from another class.I use a data adapter to .Fill a table in that dataset and the grid displays the data fine.Works fine.On my form I have a textbox the user can type in that will will pass a parameter to the storedprocedure used to fill this table. So on startup the textbox will have "%" in it. and then the user can type in "F%" and get everything that starts with an "F"
So when that textbox changes I launch an async refresh (.BeginInvoke) to do my refresh. The table gets populated with the reduced number of records (I check ds.table(0).rows.count and it is correct)
But the datagridview then starts throwing datagridview.dataerror events. "System.IndexOutofRangeException : Index # does not have a value".It looks like the dataset is getting filled correctly and not having any issues, but the datagrid is not liking this update. The index out of range error is so common that I'm not finding what I need through searches.
I have a DataGridView with 4 columns which I transfer toa dataset - this works fine, i posted the code belowHowever I adde a CalendarColumn into my DataGridView but this doesnt transfer over to my dataset.Does anyone know how I can add this Calendar column onto my dataset along with the other 4 columns?
Dim col As New CalendarColumn()
Me.dataGridView1.Columns.Add(col)
Me.dataGridView1.Name = "Trip Date"
[code].....
I have a datagridview that was bound using the wizard and all the column created that way. So I haven't done any code to bind the datagridview. It will pull the data from the database and dataset just fine. My problem is when I create a new row it won't update the dataset or database. I have tried different ways that I thought it would work in the code and still haven't found a usable way to do it yet. Or if I need to do all my binding and columns through code give me an idea where to start if I have to go that route. This is my first experiences with Datagridview. I normally use comboboxes and textboxes to write to a dataset and database which all work very well.
View 8 RepliesI am making a combobox from my data source. Basically, This is a projects form and the user needs to select the the primary contact which is contrained by the customer id (GETbyCustomerID) set in another field. I have it working... mostly except the combobox only displays the contact ID which is completely useless to the user. I need to know how to display the First and Last name (both are seperate columns in the table).
View 1 RepliesI have a vb.net form with a dataGridView
The dataGridView data source is the dgvTableAdapter with this sql statement
SELECT membres.ID, membres.refere_par, bands.titre,
membres_1.prenom & ' ' & membres_1.nom AS reference_nom
FROM ((bands INNER JOIN membres ON bands.ID = membres.[band])
INNER JOIN membres membres_1 ON membres.refere_par = membres_1.ID)
[Code]....
I know the delete statement works because I saw the changes in the database. If I close the form and reopen it, the dataGridView is up to date.
The membres table is an access table
I'm running the app in visual 2010 debug mode.
Here is my code that parses an XML string to a datagridview:
Dim DS As New DataSet
DS.ReadXml(New StringReader(StringHTML))
DataGridView.DataSource = DS
[code]....
Child list for field Produits cannot be created.I'm sure it's something so simple you guys are chuckling...Can't wait to see what's the problem
