Load Recordset Into Textboxes?

Oct 25, 2010

I am working on a proyect and i got stucked,The thing is i have a form which contains a datagrid, and a group of txtboxesI load information into the datagrid through a recorset called rsservices that uses a db table in informix ( i work with adodb connection and adodb recordsets)and it works fine.Then when you click in a record into the datagrid i want it to display the information of the row selected into the textboxes , there are like 5 textboxes each one shows a different info of the same row.

ex : row = Name, last name, address, gender, id etc

but i failed doing that what I tried was, in the activated event of the form :

If rsservices.State = 1 Then
rsservices.Close()
End If

[code]....

after i do all that and run the program the thing loads the first row into the textboxes but when i try to select another row from the datagrid it does nothing?

View 1 Replies


ADVERTISEMENT

VS 2005 Load Multiple Tables Into A Recordset Using The Join Command?

Jun 3, 2009

I've found alot of examples for add/edit/delete a single table. In VB6 ADO you could load multiple tables into a recordset using the join command. Then manipulate or modify the data.

I've found how to retreive multiple tables like,

Da = New OleDb.OleDbDataAdapter("Select groups.groupid,groups.userid,lots.groupid,lots.lotid from groups inner join lots on groups.groupid=lots.groupid order by groups.groupid asc", DB) But the only way I have found to update is to use seperate Update commands for each table.

View 6 Replies

Load Textboxes Dynamically

Sep 13, 2011

there are two forms, form1 and form2. form1 has textboxes 10, the user can enter data in a specific number of textboxes: ie: 5 or 3, or etc.

then the user clicks a button, and based on the number of textboxes that he entered data on, form2 will load a number of texboxes: If the user filled 3 textboxes in form1, form2 will show 3 textboxes.

View 3 Replies

Asp.net - Fail To Load Values In Textboxes?

Apr 16, 2009

I have textboxes which is placed inside accordian (ajax control).In pageload event i have written the code to load values in textboxes. But onload event one error is coming as object not set to instance of a object. Values are not coming in textboxes.
Then i tried to initialize controls in textboxes .Then the error cleared. But
Values are not coming in textboxes. What may be the reason for this?

View 2 Replies

How To Reset Textboxes On Form Load

Jun 2, 2011

i would like to get my form to open form with textboxes empty and ready for being populated. I have tried the coded below:

'Clear textboxes on form load
Private Sub ClearTextBoxes(Byval ctl As Control)
For Each ctl In Me.Controls

[code].....

View 7 Replies

Save And Load Numbers From Textboxes?

Jan 5, 2010

How to save and load the numbers that i put in the textboxes of my program

View 14 Replies

Datagrid-on Row Click, Load Text From Each Cell On The Row To Textboxes?

Aug 7, 2009

What im trying to do is, when I click on any row on my datagrid(dgvCompositions), all the cells(16 columns excluding ID column) in that row must be loaded into the 16 textboxes I have (txtB1, txtB2, txtB3....)

So when I click the row, and the entire row is highlighted the text from the cells get loaded into the textboxes.

I know how to pull data or text from specific cells clicked

Private Sub DataGridView1_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellClick
TextBox1.Text = DataGridView1.Item(0, e.RowIndex).Value
End Sub

But the problem I have is that how do I pull all 16 simultaneously and put them into 16 individual text boxes?

View 4 Replies

Save Multiple Textboxes To A Single File And Load Each One By Itself?

May 28, 2010

I have a sign up sheet that I am working on for instance;

username
password
street address
city
state
zip

I've been trying to save the textboxes individually but when I go to load the information everthing is pushed all into one textbox.....I'm also using the SaveFileDialog and OpenFil

View 5 Replies

Save/load Multiple Multi-lined Textboxes?

Aug 29, 2011

I have six textboxes that need to have the text saved/loaded. They all have random line amounts under 28 if this info helps at all.

View 7 Replies

VS 2008 Have A Code For Load Info To Textboxes And Save To Ini File?

Jun 6, 2010

have a code for load info to textboxes and save to ini file.like takes info from hello.ini file and when i load rhe program it will take the info to the texteboxes...

View 5 Replies

Load Data From Database Table Fields Into Textboxes In A Windows Application?

Apr 26, 2009

I have created an windows application which stores it data in a database. What I would like to know is how do I access the tables in the dataqbase and transfer the data in them into textboxes on the forms in my application. I can connect to the database and view the tables, but I have'nt got any idea how to get the data from the fields in the tables into the appropriate textboes on the application forms.

View 2 Replies

Save / Load Control Values (Multiline Textboxes / NumericUpDowns / Checkbox) To / From File

May 30, 2012

I am looking for a way to save and load the values of all my controls present in my form.My form has around 100 controls spread over 7 tabs. The controls include (Multiline) TextBoxes (Strings), NumericUpDowns (Integers, Decimals) and Checkboxes (Booleans). If the user clicks the save button a "Save File" dialog should appear allowing the user to specify the directory and the filename of the save file.All the values of the controls should then be written to that file.If the user clicks the load button an "Open File" should appear where the user can pick a previously saved save file. All the controls should then adopt the values found in the save file.I have implemented Application Settings in my form, and now when I click save, it saves the control values through My.Settings.Save(). If I click load it loads them.However, my project requires that multiple save files can be made to reflect multiple configurations. As I understand Application Settings only allow for a single .config file in the Application Data folder.So how can I code a save/load routine to save/load different configurations?

View 1 Replies

ADODB Recordset To ADO.Net Recordset?

Jul 15, 2009

How do you change an ADODB recordset to ADO.Net recordset?

View 4 Replies

VS 2008 - Control Types - Textboxes And Richtextboxes - Isolate The Textboxes Only

Oct 14, 2011

On my form, i've got some textboxes and some richtextboxes. I'm using the following code, to search through the text properties of each of the two types of control. see below:-

For Each ctl As Control In Me.Controls
If ctl.Text = "7777" Then
ctl.Text = "found the sevens"
End If
Next

What i'd like to do is isolate the textboxes only, is there a way to do that? I tried this but i got an error:-

For Each box As TextBox In Me.Controls
If box.Text = "7777" Then
box.Text = "Found"
End If
Next

View 2 Replies

Pull Information From A Websight's Textboxes In IE Into Program Textboxes?

Oct 21, 2010

My goal is to, Pull information from a websight's textboxes in IE into my program textboxes. and to later Put changes from into other values on the websight from my program into it. The sight has multiple textboxes, on different frames. within it.I need to keep it as a exsiting open browser instead of making a new one. only gotten as far as finding the open internet explorer window, by useing

[Code]...

View 2 Replies

Form With 4 Textboxes. The Textboxes Are Multiline?

Apr 29, 2010

I have a Form with 4 Textboxes. The Textboxes are multiline. To write the contents of the 4 textboxes, I did the following.

[Code]...

How do I read to or populate the Textboxes using StreamReader or StringReader or other means?

View 1 Replies

ADO Read Only Recordset?

May 23, 2011

why this recordset is read only?

Sub PopMainForm()
Dim rst As ADODB.Recordset
Dim con As ADODB.Connection

[code].....

View 4 Replies

ADO Recordset Error?

Jun 29, 2009

I get the following error when open the recordset: run-time error '-2147217904 (80040e10)' Method 'open' of object '_Recordset' fieldHow to solve the problem

Dim CONN As New ADODB.Connection
Dim RS As New ADODB.Recordset
CONN.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & App.Path &

[code].....

View 1 Replies

C# - Dataset The Same As A Recordset?

May 4, 2012

I used to work in VB.net and used Dataset's all the time when working with ADO, but now i'm Working in C# and the Research is showing me a lot of Recordsets.

Are they the same thing?

If no what is the difference?

View 2 Replies

Get Recordset Behavior In .NET With ADO?

Oct 15, 2009

how to negotiate a dataset via:

For Each dRow In quanDS.Tables(0).Rows
'do something to each row
Next

I now need to figure out now to loop through a subset of the records returned in the dataset - here's a VB6 example I need to convert:

strSQL = "select * from tblDQ order by xid, xcode, xDOS"
rsMaster.Open strSQL, conDB, adOpenDynamic, adLockOptimistic
rsMaster.MoveFirst

[code]....

View 2 Replies

Getting A Value From A Recordset's Field?

Dec 1, 2009

I added a bindingsource and set the datamember to a table (in access) which has two fields. My bindingsource name is M and the field is usersT. how do i get its value?I tried:

dim tmp as string
tmp=M.item("usersT")
but this doesn't work.

View 2 Replies

Moving VB6 Recordset To .Net

Feb 1, 2012

I have an application in VB6 that joins 3 tables together to create 1 record set and I am able to use the move next and move previous methods to navigate through the record set.

I am having trouble creating this same scenario in vb.net with a data set. Do I have to create each table individually and then link them together somehow or can I join them all together in a query before I fill the data set?

View 2 Replies

My Recordset Not Updateable

Jun 9, 2011

I have a continious Form which opens and shows records of people with whatever criteria the user had chosen the screen before. When the form opens it checks which button was pressed and then changes the recordsource of the continious form.

When I try to edit the records it says "Recordset not updateable". I have done everything I can think of, I have change the type of recordset from dbopensnapshot to dbopendynaset.

View 5 Replies

Passing A Recordset From VB6 To .Net?

Jul 21, 2009

VB6 code:
Private Sub Command1_Click()
Dim ccw As New ReceiveRecordsetFromVB6_VBNET.Class1
Dim rs As New ADODB.Recordset
rs.CursorType = adOpenStatic
rs.CursorLocation = adUseClient

[Code]...

View 7 Replies

Sorting A Recordset In Vb?

Feb 11, 2009

How to sort a recordset using vb 6.0 coding?

View 2 Replies

String To Recordset - Vb6?

Jun 9, 2010

In this code i have a problem

Dim db As Database
Dim r As Recordset
Dim holder As string
Set db = OpenDatabase("c:database.mdb")
Set r = db.OpenRecordset("record1")
r.movefirst

[Code]...

View 4 Replies

Use The Code For Recordset?

Apr 14, 2010

To retrieve data from MS Access database I was using the following code to create a new Recordset. How can we declare it in VS 2008?

Public rs As New ADODB.Recordset
Set MSHFlexGrid1.DataSource = rs

Are the following codes above possible in VS2008?

View 6 Replies

Using Sqldatareader Instead Of Recordset?

Jan 28, 2010

Can i use SQLDataReader instead of a Recordset. I want to achieve the following result in an SQLDataReader.

Dim dbConn As New ADODB.Connection
Dim rs As New ADODB.Recordset
Dim sqlstr As String = "SELECT Name,Status FROM table1 WHERE id=" +

[Code].....

can i replace recordset with SQLDataReader and if I can can you please show me the changes in code.

View 4 Replies

VS 2005 ADO.Net Recordset?

May 27, 2009

how to create a recordset in ado.net?

View 10 Replies

Properties Of The Recordset And Its Function ?

Feb 9, 2010

what are the properties of the recordset and its function .

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved