I need to manipulate data for 1000 boxes, each one of these boxes has 8 variables.How to declare an appropriate array? and how to load the array with the 8 variables for each box?
View 1 RepliesI want a rich text box to display public variables like (pizza toppings links etc that have been selected in other forms) these variables have declare in a module. But I want the rich text box to display these variables as soon as the screen loads ( a on form load event) if you know what I mean.
View 1 RepliesI need to load 2 variables in the Title Bar as the Form.Name on Page load but this isnt working.
View 10 RepliesAfter the client finishes testing, they go to the results page and then my program returns them back to the secondary page.If they re-enter the testing page again, for a second go-around, with out completely leaving the program as I have been doing since I was tweaking the code after each run, the repetition counter is not resting back to Zero. It�s still retains the information from the previous testing phase.
Example:The client chooses how many testing cycles they want to go through, from 1 to the total amount available to them to test. Right now its only 5.When they first start testing, it starts at �1 of 5�, then progresses at one increment for each drug they test on. Once they reach 5 and answer their final question, the program then goes to the results page and then to back the secondary page. If they choose to re-enter the testing page without totally leaving the program, the testing page counter sits at �5 of 5�. Shouldn�t the page be resetting the variables each time it loads?
I have an MVC application which sets some session variables based on internal static IP addresses.I have built an ApplicationController to override the OnActionExecuted sub in MVC for data that I need to use throughout my application.However, the code below, which is just a snippet of my code but is edited for my post, only partially works. On initial page load, the session variables aren't saved, but after a page refresh they are. The issue I have is that these need to be saved on the initial page load.
If Session("Item1") = Nothing Then
If IpAddressShort <> "" Then
Dim locInfo = cmsRepository.GetInfoBasedOnLocation(IpAddressShort).SingleOrDefault()
If locInfo IsNot Nothing Then
[code]....
Theoretically, if I'm correct, if there is no Session("Item1") set/if Session("Item1") is empty, then the rest of the snippet should run and set those variables.How come this isn't setting those variables on the first time the page load?
im already familiar with splitting variables into an array using a certain character e.g.
strtextfield = name,surname,dob
strpersonarray = strtextfield.split(",")
strpersonarray = (0)name
(1)surname
(2)dob
im wondering whether you can split one variable according to its characters e.g.
strtextfield = name
strpersonarray = strtextfield.split(unsure as to what char)
strpersonarray = (0)n
[code]....
Ok so I have an array and wish to add the variables of the array to separate lines of the list box. I came across this which in some ways worked but also didn't. The second thing mentioned on the page was to us:
ListBox1.DataSource = Form2.Title This works the first time you run it but if you try to run it again nothing happens. So using the above or something else how can I get it to update the list box? Another thing I tried was to use the DataSource method but instead to clear the list box first, but that turned up an error
I have a set of nine double variables declared earlier in a program (i.e., phq91 through phq99) that I have placed within an array. The variables need to hold numeric data that correspond to item responses within combo boxes.
View 6 RepliesMy problem is, in VB 2008 I need to convert this[code]...
View 8 RepliesI have a small class of Object CellValue
Friend Class CellValue
Public CellColor As Color = Color.White
Public CellShape As Shape = Shape.Blank
Public CellName As String = ""
End Class
Then in my main I make an array of CellValue but I want to know if the values are also being passed down with the array.
Dim Plan(SizeW - 1, SizeH - 1) As CellValue
Dim CellW As Integer = PictureBox1.Width \ SizeW
Dim CellH As Integer = PictureBox1.Height \ SizeH
[Code].....
Are CellName, CellShape and CellColor being tied to each element in the array?. The reason is because I need to use these properties to tie certain functions to them. The CellName should have a MachineID which I would have to use to pull some info from a Database.
The Array should also be serialized and deserialized to XML as customer needs to create/edit and delete certain values in the array. And in order to save the array has to be in XML
So the Questions are does it save the CellName, CellShape and CellColor for each element, will it be affected if I serialize and deserialize using XML. If possible, how can I call up the Cellname p.e for a specific array element.
I'm trying to put together a quick program for our database, I haven't touched VB since vb6, and we have 2008 .NET now. my question.
Ideally I'd like to make an array which can hold multiple values...such as
Job[job#].joblocation
Job[job#].jobsupervisor
So there would be a Job array, and then different values contained within that. I can't seem to make an object or whatever which allows me to hold different variables inside it.
I have a form that asks for a name, and a phone number, it has 3 buttons, a add customer button, show list button and an exit button. When the add customer button is clicked, it increments intCustomer variable, formats the phone number, makes sure only the first letters of the name are capitalized and creates an ID that is the first 4 letters of the name plus the customer number, the show list button takes ALL customers added to the array and displays them into a multi-line text box, like so:
ID Num Customer Name Phone Number
JOHN-1 John Harry Peters (111) 111-1111
Paul-2 Paul J Rodgers (111) 111-1111
Etc...
The area where I am completely lost in, is how to add the consecutive customers to the array, in the correct way. here is my code in its entirety
Public Class frmCustomerName
Dim intCustomer As Integer = 1
Dim names(9, 2) As String
[code]....
This may sound quite basic, but i was wondering how to change the value of a variable in an array, not knowing the index value but knowing what the variable is.
For example, I have an array and I want all strings within it that haven't got a value to say "Stretched". here is what i have tried:
For Each stl As String In Me.stl
If stl = "" Then
stl = "Centered"
End If
Next
My array is called stl(), and the size of it is always changing, so i can't just change the specific variables within the array
Also, is there some way to show/change etc all variables in an array? e.g. msgbox(stl(all))
I know this won't work, but what will?
I have text file that is saved as comma delimited. There are 3 columns with x number of rows. I cannot seem to figure out how to create an array that will store all three columns with the variable intProductArray as the length of the array. I have been opening the file with only one column and putting it into a textbox and using the lines of the textbox as the variable for length. I cannot figure out the array for all 3 columns.
Private Sub btnChoose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnChoose.Click
Dim myFileDlog As New OpenFileDialog()
myFileDlog.InitialDirectory = "c:"
myFileDlog.Filter = "All Files (*.*)|*.*" & _
[Code] .....
I'm having difficulty passing a variables in a an array list. [Code] I have to pass the paramvals array to the function. The paramvals array contains the string but not the value of variable of that name. For example, parmaval(0) should contain the value of vSequence but it showing me that it contains string "vsequence".
View 3 RepliesI found out that you cannot set the array size for a structure when you are making it, i.e
[Code]...
I have to fix this by making a variable with type made by Structure bullet and then redimming it, i.e
[Code]...
This means for every variable with the bullet type i create i have to redim. Is there a way i can set the size of .mesh with .capacity for every single variable created with the bullet type automatically?
I'm currently designing a mock-up of a customer booking system for a cinema using Framework 4.0. All data at present will be stored in an array and as it's a mock-up, it will remain their (customer name, ticket price etc...) as no requirement to permanently store the data at this time.[code]...
View 1 RepliesMy basic set up is Visual Basic 2010 Express on Windows 7 64 bit What I'm trying to do is to have VB 2010 get the data from a Open Office spreadsheet. I have looked around on the general interenet and have found quite a few references to MS Excel, but none dealling with Open Office. The code samples I have tried to use seem to rely on MS Excel being installed (Which I dont have). The 'Automate excel' page (Here: http://support.microsoft.com/kb/302094) naturally seems to rely on a Microsoft Excel Object Library reference that, not surprisingly, isnt there because I dont have MS Excel. Keep in mind I havent mucked around with a programming code for decades!
What I do have is Open Office 3.2, which CAN save spreadsheets in a excel format (.xls), and a few others such as .ods, .dbf and .xml (Excel 2003?).
[Code]...
I have a delimited text file, let's call it models.txt and it's delimited by a comma with carriage returns.
example:
21,Z920081
22,Z920082
59,Z930023
120,Z930027
I'm trying to input this into an array and then a combo box using:
dim item as integer
dim array() as string
dim ifile as integer
[CODE]............
What I want to do is to display the right part of the delimited text (Z920081, Z920082, etc) in the combo box. But when you select the item in the combo box, I want it to use the left part of the delimited text (21, 22, 59, 120, etc) as a variable for other use.
I want to create an array of constant variables for my program. But from everything I read about arrays they are handled by a number. I want to be able to pass back a variable that will hold the name of the constant as well as the value. How would you go about do that.I want to when I type the variable to have the constant name show up as I am typing.
View 4 RepliesI am working with binary files that have 500 rows and 500 columns (width x height). When I load these files into array I set width and height variables to 500 and I was wondering instead of hard-coding like that how I can code in a way that the program should find the # of rows and # of columns of the file before loading the file into array...
View 15 RepliesI am trying to make a MVP kinda system and I am trying to define and load an array, through the system. Then read it out and it should populate a ListView1 object.I know they are set correct, because the console tells me it's set ok.I know the sample would fill with the same item (a week to be exact) every time i add an item, but that's not the point.Also, is it possible to define the array without the index, i mean now i set it with (6) so it sets 6 blocks for strings, but I would like to be more flexible. Is there a way like in php for example
$item["firstname"]
$item["lastname"]
...
ClientlistItem.vb (definition of the actual item)
Public Class ClientlistItem
Private entry(6) As String[code].......
I'm having some more trouble with working with arrays. My assignment is to take an input file of 10 numbers and display the original array, the array reversed (1st element is last element, etc.), the average of the parallel elements (nth element of both arrays), the average of the original array, and the elements greater than the average. I know I need to load the file into an array. However, I can't seem to figure out how to reverse it, nor average the two even if I can get it reversed.
View 6 RepliesI am trying to load an array from an excel sheet (in xml), whic I have managed by altering some code kindly provided by Beth Massi. the trouble is that I don't really understand some of the original code, hence I cannot remove the binding to some objects in the GUI that I don't need.
[Code]...
How do I load data from a datatable into an array.
Dim
dtDataTable As New System.Data.DataTable
dtDataTable = dsStaffHoursWorked.vwGroupProjHoursDate
Dim DRs = dtDataTable.Select("enddate = '05/14/05'")
i'm tired of searching about Load file from pc to my app. and then read a file in hex.
now i have these code and everything is ok with small file size. less than 1GB files my question is all of us know Hex files reader like (Hex Workshop Editor 6... and Hex Editor Neo) i Download these and i read the hex of file over (36 GB) (39,490,420,735 bytes) without any save bytes in Ram Memory???
IN vb.Net when i try to read Hex of file over 1GB in array.> windows 7 not responding iknow that's because i have 2GB in my machine!! what's the way that (hex workshop) use to load any file Regardless of size this is the code that i use.
[Code]...
On Error Resume Next[code]...
on debug mode, i got the pic array to contain nothing but 0.
i'm tired of searching about Load file from pc to my app. and then read a file in hex. now i have these code and everything is ok with small file size. less than 1GB files
(my question is)
all of us know Hex files reader like (Hex Workshop Editor 6... and Hex Editor Neo)
i Download these and i read the hex of file over (36 GB) (39,490,420,735 bytes)
**without any save bytes in Ram Memory**???
IN vb.Net when i try to read Hex of file over 1GB in array.> windows 7 not responding
iknow that's because i have 2GB in my machine!!
what's the way that (hex workshop) use?
this is the code that i use.
X = String.Join(" ", IO.File.ReadAllBytes("Location of file").Select(Function(b) b.ToString("X2")).ToArray())
Why does the following not work below? I get an error on the first bracket "{" saying "Expression Expected"[code]...
View 2 Replies