Painting - Gradient Effect From Red To Yellow

Jan 2, 2010

in the painteventargs of the form, i've got something like this: [Code] i'm getting a very cool gradient effect from red to yellow, but why is that the case? shouldn't the 1x1 portion be totally red? and the remaining pixels be totally yellow?

i'm not trying to paint a 1x1 portion in my form, im trying to know why e.Graphics.DrawImage(bm, 0, 0, 100, 100) doesn't draw a 1x1 red portion on my form through the code provided above. my understanding is that 0,0 specifies the point to draw the image. bm specifies the image actually drawn, which is 1x1 px. and 100,100 specifies the allowed space for the graphics to draw, if this is correct, the first pixel should be red and the remaining 9999 pixels should be yellow but they aren't.

View 5 Replies


ADVERTISEMENT

Create A Shaped Form With An Attractive Shadow Effect By Painting Progressive Alpha Blended?

Aug 25, 2009

I'm trying to create a shaped form with an attractive shadow effect by painting progressive alpha blended layers underneath the main visible form area (a background mask color has also been set to allow a shaped form). This is going well, but I have one major problem to resolve - the bottom shadow layer does not appear as the correct transparent shade - it always appears solidly as the background color / transparent mask color for the form.

Why does this bottom shadow layer not show up as transparent, and why is this color being shown when it is set as the transparency key for the form (and so should be invisible anyway)???[URL]..

View 2 Replies

Check All Yellow Checkboxes?

Dec 10, 2010

I have a piece of code for a program where when a specific checkbox is checkedunchecked (In this case "Allyellow") it checksunchecks any checkboxes within a group of 14 with a lightyellow backcolor.

While the piece of code below does this fine it seems to me to be very clunky and it must be possible to streamline it.
Private Sub Allyellow_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Allyellow.CheckedChanged
If Allyellow.Checked = True Then

[Code]....

View 2 Replies

Make The Color Yellow Have Opacity To It?

May 22, 2010

Ok i need to make the color yellow have opacity to it so its some what see throw but not all the way.

View 4 Replies

VS 2010 Check All Yellow Checkboxes?

Dec 10, 2010

I have a piece of code for a program where when a specific checkbox is checkedunchecked (In this case "Allyellow") it checksunchecks any checkboxes within a group of 14 with a lightyellow backcolor. While the piece of code below does this fine it seems to me to be very clunky and I know it's possible to streamline it any number of ways.

Yellow Check-boxes
Private Sub Allyellow_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Allyellow.CheckedChanged
If Allyellow.Checked = True Then

[code]....

View 4 Replies

RTB - Some Bullets Turn Yellow Other Stay Black

Jun 18, 2009

While using SelectionBullets in a RichtextBox I am experiencing some issues with FontColor and the SelectionBullets Color. For example I am selecting the entire text in the RTB and set it to FontColor Yellow - the font color itself is fine; the problem: some Bullets turn Yellow, some stay black. Would there be a way to have those Bullets permanently colored in black?

View 1 Replies

Troubleshoot Yellow Warning Icon Next To Reference?

Dec 15, 2010

I've added a reference to a 3rd party dll in a Visual Basic project file. Next to the reference there is an icon with a little warning triangle and lines of code that use items in the reference give error messages. The dll IS where I'm pointing to.

View 2 Replies

VS 2005 - Web Browser's Yellow Strip Like Control

Apr 6, 2010

you must have observed an yellow strip displayed in the web browser for most of the events like 'pop up blocked', 'asking to save the password',etc. i want an same kind of yellow strip to be displayed in my form after the menu and tool strips. That strip must be displayed above the control(if any) which are placed exactly under the tool-strip. I must be able to call it in the same way like we do for the message-box.

View 4 Replies

Change The Color From Green To Yellow To Red As Values Decrease?

Mar 24, 2009

Using VS 2008 vb.net how can I change the color from green to yellow to red as my values decrease? Actually the logic is easy but my color isn't changing.

progressbar1.forecolor = color.red -- This is not working

View 4 Replies

Use MsgBox Exclamation Point Yellow Triangle Image On Form?

Jul 22, 2011

Everyone knows of the yellow triangle with a exclamation point in it on a message box. I would like to use that same image on one of my forms. Is this possible? If so, how do I do it?

View 8 Replies

Fill Picture Boxes With Red - Green - Yellow - Blue Or System.control Randomly

Jul 13, 2010

I've got a simple little bit of code, to fill 33 Picture boxes with red, green, yellow, blue or system.control randomly. (System.Control should be more likely). Here is what I have at the moment:

[Code]...

View 7 Replies

Select A Random Word In {Robert|John|Wayne} And {blue|green|yellow}?

Feb 25, 2010

Say I have a string like this:

"Hi My Name is {Robert|John|Wayne} and I like the color {blue|green|yellow}"

How do I select a random word in {Robert|John|Wayne} and {blue|green|yellow}?

View 11 Replies

Cell Painting In Datagrid?

Aug 19, 2009

This is mis system projectcell painting in datagrid when error while calculating datai have made a datagrid with 7 columns firstly 7 r with values 0 at beginning when user enters input then in the datagrid with first 6 columns & 7 one with total i.e. total (column 7) = col1 + ...to Col7now, when the total entered by user is different from total it should match itif same then no cellpainting is done

View 4 Replies

Datagridview Scroll Bar Painting

Sep 29, 2010

Has anyone ever noticed that when adding many rows to a datagridview the scroll bar has a problem painting and the user can no longer use it? How do I fix this?

View 3 Replies

Datatables And Screen Painting?

Dec 2, 2010

Their system executes a DB query everytime they select something, causing performance issues. So I thought that I would read the superset of data into a datatable, and then whenever they want subsets, simply run against the datatable. I've done some testing and the performance difference is HUGE.The problem is how the screen paints on postbacks. The screen will temporarily go blank then the data will appear as expected. Of course, they don't want the blanking of the screen each time they select a subset of data.

I am currently using a repeater to handle the display of data due to the nature of what they want to display. A datagrid might be a good alternative for sorting functions, but I think it would still blank the screen when it data binds.How do I go about filling the repeater without blanking the screen? Is it even p[ossible? Logically I would think not but I don't have the experience. Or perhaps I can fill a datagrid without blanking the screen on the postback?I'd rather not have to go out to the database every time, but if that's the way to go then I can live with that.

View 5 Replies

Doing Art/painting/graphics In Basic?

Aug 24, 2010

I downloaded Visual Basic 2010 Express and got familiar with it over several days but the following issues are stumping me:

Where are the art instructions to be found? The ones featured in the examples are pretty basic. I've looked all over but can't find anything.

View 2 Replies

Painting A Polygon Given The Coordinates?

Feb 18, 2011

I just finished creating a program where you find the area of a 5 sided polygon. But not I want to actually draw the polygon given the coordinates

Private Sub PI_Estimation_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Me.Paint
Dim myGraphics As Graphics

[code].....

View 1 Replies

Painting On A RichTextBox Control?

Oct 16, 2009

Drawing on top of a RichTextBox control has always been a pain due to the Paint event, and related OnPaint() method being suppressed. Here is a bit of code that gets around this issue.The following derived RichTextBox will use a seperate NativeWindow control to hook into the message stream of the RichTextBox, listen for the WM_PAINT message, and then raise the Paint event on the RichTextBox for you.In this way, it is possible to use the Paint event handler of the RichTextBox control to paint on top of the control after it has performed its default rendering of the text.The following code is an initial implementation but appears to be pretty solid so far. 'Based in part on code located at: [URL]

''' <summary>
''' A RichTextBox object which raises, and utilizes, its own Paint event.
''' </summary>
''' <remarks></remarks>

[Code].....

I may continue to expand upon this idea, but I wanted to get the initial code out here as this seems to be the minimum to get the painting functionality to work.Reed Kimble - "When you do things right, people won't be sure you've done anything at all"

View 1 Replies

Painting An Opaque Black Rectangle?

Mar 5, 2009

I'm not sure if this should be here or in the Graphics subforum. Basically, I want to simulate the monitor(s) going black (it's an immature April Fool's Day prank). My initial thought was to create a borderless form that is the size of all the monitors with a backcolor of black. Then, slowly, increase the opacity of the form. This approach works great as far as the visual effect I'm trying to achieve...the problem is that it's a form. If the form is on top - while you can *see* windows below it - you can't interact with them. I'm wondering if there is a way to create the same visual effect without using a form so that the PC will remain usable while the monitor appears to slowly be getting darker?

View 1 Replies

Painting Only Part Of Text In Cells?

Feb 18, 2011

painting only part of text in cells like my column is NAME and values are bahushekh ,bahushekh1,msdn ,abc etc for that column. Now I want to paint only bahu in Red if it exists rest part will be black

View 2 Replies

Painting To Graphics On A Panel With A BackgroundImage?

Feb 28, 2012

I have a panel that has a BackgroundImage set to "zoom". Because of this, the image usually has some grey "letterboxing" showing the panel beneath the BackgroundImage. I want to paint on the Graphics Object of the Panel using its paint event handler. Is there a way to contrain my painting to just the image part of the panel? Is there a way to find the rectangle that the BackgroundImage is occupying within the panel?

P.S. I don't want to make a graphics object from the BackgroundImage because I'm already using that for some other "paint layers".

View 5 Replies

VS 2008 Painting - Minimize My Application

Apr 28, 2010

I've never had a need minimize my application until today. But when I did, and I brought it back up, it looked... strange. Which makes me think it has something to do with a paint problem... or something.

Before:

After:

View 3 Replies

VS 2008 Painting Cell In DataGridView?

Apr 29, 2010

I have a datagridview, wich on colum is a Combobox getting data from another table.This column it's an evaluation score mark, who permit user choose between number 1 and 10I wanna do the following:In my DGV, if the value is lower than 5, then paint this cell, and only this cell, redIf the value is uper than 5, than paint this cell green (and only this cell).That means in the DGV I will have at the same time, red and green cells.

View 1 Replies

VS 2008 Painting Part Of A Tab Control

Nov 24, 2010

How do I paint the part pointed to?

View 1 Replies

VS 2008 Print After Painting To Picturebox

Sep 20, 2009

I am not doing something right! I just changed my program over to painting to a picturebox instead of the form. Anyway I want to be able to print the picturebox as big as it can on a 8.5x11 size piece of paper without streching the image!

First of all I can't even get it to print at any size... it says I have no Picturebox1.image!

Public Sub Picturebox1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles MyBase.Paint, PictureBox1.Paint
g = e.Graphics

[Code].....

View 4 Replies

VS 2010 Custom Painting An MdiParent?

Jun 4, 2010

I'm tired of looking at the boring default dark gray back of an MdiParent. I tried using Juggalo's Gradient Form and realized that the MdiParent was not being painted, at all. A temporary work around was to create an Image and set it as the background. This is fine and dandy but when I bring the thing to full screen and drag around my MdiChildren forms, the application gets laggy. I have already tried setting the Form to Double Buffered and it doesn't work at all, no noticeable change.I did try editing the Form's Paint() event, but to no avail.Here's the code I'm using to create the image (practically from Juggalo's Gradient Form):

[code]...

Creates the image nice and fast. I want this to happen in the Form's Paint Event though, so I don't have to rely on an Image that causes my program to lag about.

View 39 Replies

Apply Gradient To A Square?

Apr 8, 2012

I am working in vb.net, visual studio 2010.

So i want to apply gradient to a square, a center to edges gradient. This is the code:

Public Class Form1
Private Sub PicSourcefrm(ByVal sender As System.Object, ByVal e As PaintEventArgs) Handles Me.Paint
Dim Graph As Graphics

[Code].....

NOTE: Picsource is just a PictureBox named that way. If I put "BrushSquare.SurroundColors = Color.Red" in a comment. The program works but the edges are white, not red like I want them to be.

View 1 Replies

Cannot Get Gradient Form To Work

Jun 18, 2009

I have this code for a gradient form(EXAMPLE 1). It works fine on its own.I tried putting it into an existing project of mine and I cannot get it to work. The project is quite large so I am no sure what the issue is. Is it due to the fact that I have an InitializeComponent() line in the my Sub New in Example 2? Note I have alot of code

EXAMPLE 1:
Public Class Form1
Private Sub Form1_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Me.Paint
'Creating a new Rectangle as similar width and height of the base form

[code]....

View 8 Replies

Cannot Get Gradient Form To Work?

Oct 29, 2009

I have this code for a gradient form(EXAMPLE 1). It works fine on its own. I tried putting it into an existing project of mine and I cannot get it to work. The project is quite large so I am no sure what the issue is. Is it due to the fact that I have anInitializeComponent() line in the my Sub New in Example 2? Note I have alot of code

View 1 Replies

DataGridView - Add Separate Gradient To Each Row?

Apr 21, 2010

DataGridView, add unique gradient to each Row I like to add a gradient brush to each row of my datagridview. I like to change the gradient colors for each row independently depending of some cell values in the row. I know how to add a solid background color to each, cell, row, column etc. but I do not know how to add a gradient brush to each row individualy.

I need to fill the datagridview with values, the datagridview is disconnected from any database or other data source. After filling the datagridview, I want to step trough each row, find my key values, decide the gradient colors and then add the gradient to the row.I like to do something similar to what I now do with a background color:

For Each R As DataGridViewRow In DGV.Rows
Dim CS As New DataGridViewCellStyle
Select Case i

[code].....

I am using VB.NET and VS 2008 and 2010.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved