I am trying to play video files (atleast wmv, avi) from a byte stream in vb.net.Is it possible to direct this data at a wmp control?I have done this successfully with images & picture boxes, just need help with the video.
View 1 Replies
I have an application that sends Bytes of data through UDP, these bytes are read from an AVI file when the client receives the bytes it builds the AVI file on another computer perfectly but I want to be able to use the received bytes to play the video from the stream. Does anyone know how I can play the video from a stream? I tried using DirectShow but I don't know how to use a stream as video let alone having AVI files play with DirectShow.
My main goal is to have the application slowly "buffer" the movie for the client as they watch.
I am using visual basic .NET and I want to play a video from a byte array that I have, but without saving it first at the disk. Directly from that array. I tried the directshow lib for a while but didn't managed to find a way to play it. WMP didn't worked either.
View 1 RepliesHow do I play audio/video files in VB.NET?
remember to mark the replies as answers.
how to open and play video files in windows form? also save videos in a specific folder inside the project.
View 2 RepliesI am trying to create a software where video files play continuously using a timeline like Windows Movie maker or Pinacle Studio. So i have no idea how to maintain the time line. Will i use Timer Control for that or any other methods are available.
View 6 RepliesI just converted the following code from c# to vb.net. It is functional and works correctly with my company's firmware/devices. My next challenge. Previous serialport code used much more readable structs which where then converted (after building a packet) into byte() automatically as part of the serialport encoding. (this is my understanding)How could I
1. morph byte arrays 'ToSocket' and 'ToMTP' below into structs and
2. convert into byte array for Socket.BeginSend(byte(),.....) to stream out to remote devices?
Imports System.ComponentModel
Imports System.Text
Imports System.Net.Sockets
[Code]....
I was wondering if it was possible to have a program open Firefox, and have it open a bunch of tabs that all go to a link with a video, and then have it automatically play that video?
View 4 Repliescan play a SWF video but not a Flash Video?
View 14 RepliesIs there any way to play MP3 directly from a memory stream (without any temp. files) using VB.NET or C#? or play from SQLCe database?
View 2 RepliesI want to stream video from a simple webcam over LAN for object detection purpose. Is it a good idea to grab frames and send them continuously over network with NetworkStream.Write()?
I did this but usually on client side i lost half of image data and I got noise, I don't know what is wrong. I'm looking for a fix or a better idea.
I put the client and server source codes here, first run the client and click "START LISTENING" then run server and click "Send pic".
[URL]
I want to write a .NET application to show and save video streams from an ip camera. But I'm not yet sure what would be the best way to get started. Should I look for an Axis camera so I'd be able to use their api or will I be fine accessing the video stream using directshow or whatnot using any other camera ?
View 2 RepliesI'm trying to find source code for vb.net(2010). i want to stream video file (picture and sound) from my computer(server) over lan to another computer(client). on the server side i open the video into "Windows media player controller". how i stream the picture and sound over lan network?
View 1 Repliesdoes someone knows how to play video like avi files with the MCI in specific form in .net.
i want to play the video in my win form application in specific form for example open form called f_Video and play the avi file in that form
I have a little Logitech USB Webcam that I have attached to a laptop and I want to be able to view a video stream from it. I already gathered it will need to be a client/server model...and I probably need to use TCP/IP and/or Winsock (if its still even used)...
how to really approach this application as far as the video capture process? I don't have a need to really record video in any way so if i can just "preview" the video thats fine, although recording would be a neat bonus.
I read into the Windows Image Aquisition libraries and they seemed to be the right thing...but I wasn't so sure about the cross-network half of the equation.
I am interested in streaming video from a webcam on one PC to another PC. Could this be done without streaming to a server. Could this be achieved by streaming using P2P?
View 4 Repliesi have a voice that is sampeld and transmited to the computer via RS232, every time i am saving one byte with VB program. i need to play the sampeld voice at my computer, how can i do that at real time. can i play everytime only one byte? or i need to biled a string and then play it every few secound?
View 2 RepliesI have an .net application with 2 processes, communicating using a network stream.The protocol consists of a set of commands, some with parameters, which are sent through the stream to the server. The server processes the command, and sends a response.
The protocol for one of the commands looks like this:
[code]...
Usually, this works fine. Very rarely (probably once every few millions of calls), The reading side gets the wrong values. I added code to trace the values sent and received. This shows that occasionally, the reading side gets two extra bytes, with the value 0, which was not sent by the writing side. These extra bytes appear in different places, e.g. in one case they were between i1 and i2; in another they were between the first and second byte of s2. Does anyone have any idea where these 2 bytes could come from? I checked my code, and every place that writes to the stream is traced, so it doesn't look like they are actually written to the stream. It might be worth noting that s1 is always 0, in the current implementation.
i just wanna ask how to play a video clip using .net
View 2 RepliesI have played .swf file in VB.Net using Shockwave Flash Object. But i need it with controls(mute,volume control.. )
I tried with using Windows MediaPlayer, i can play only .mp3 cannot play .swf or .avi..
I have a WPF 4/VB.net project, and I'm trying to play video in it. I've been using a mediaelement, much to the chagrin of the program's overall performance. Thus, I'm looking into the only other viable alternative that I can find for my project...directx.
Which brings me to my question. Is it possible to play video (either Theora [.ogv] or Flash Video [.flv]) in DirectX?
how to start a video on vlc player embedded in a form?I add the VideoLAN VLC ActiveX Plugin v1 and v2 to toolbox, and place both to my form.What is the code to start a video playing on VLC embedded to forms?
View 2 RepliesI'm trying to play video on Visual Basic 6 but no success.
View 2 RepliesI want to randomly play a video clip "possible different format" on a continues loop. Can I get how long the video will run or when the video has finished so the program knows when to select the next video.
View 4 RepliesI have an application I am working on and have a projector connected and working as the second monitor.I would like to setup my application to play, in fullscreen mode (using Windows Media Player) on the second monitor.I would like the application to then close WMP after the end of the one minute video clip? I am using Visual Basic 2008.
View 1 RepliesI'm currently working on a project which is basically Server-Client based.Client is standalone VB executable file and Server is web based.The program is supposed to use webcam as video capture device, stream video footages to server (on website - live feed) and allows users to manually save captured videos into their computer.Thats basically the brief description of my system. I'm starting off working with VB right now and website after I'm done with VB.
I'm new to VB, this would be my 1st project on it. I need help and guidance on how to start please, especially on video capturing functions.I've looked for available sources online and found several VB apps which lets me capture image file through my webcam. Also on MSDN forum, i found recommendations on using "DCAM Server" to stream videos on website but I'm still not sure of how to configure the settings to make it work properly, and of course, don't have a proper website for it to work with yet atm.Also realise I'll need to integrate some .dll files or activeX functions to use video capture function. I don't really know how to use these yet rite now.
There is an IP web camera that I wrote a .NET class for sometime ago. It's basically a Timer implementation that pings a snapshot CGI script from the camera every five seconds. The camera itself is very rudamentary; it does not have any sort of API for me to work with, the only thing I can do programmatically (remotely) is invoke this script. The script returns a 640x480 JPEG image. Simple.
Now what I need to be able to do is take a days worth of these images, and create a "time lapse" AVI video stream out of it that will eventually be embedded into a web page. How can I do this with VB.NET?
I want to create a RTSP/h264 video stream from static images, and incorporate it into my .NET application. So far I have found two possible ways to do this:
Use ffmpeg/ffserver, but I would need to compile ffserver on windows and then rely on it... and I don't necessarily want to rely on an external application
Use the LIVE555 [URL] library, but they do not have any .NET libraries, so I would need to spend some effort to make it work with the rest of my .NET application.
Can you comment on either #1, #2, or which is better. Is there a faster way to bring up a RTSP server in .NET? I do not mind putting in development time if there is a solid solution that takes time, but it would be good to have something we can work with fast, for prototyping and demos.
I was wondering if anyone could point me to a really good tutorial on Directsound.I don't know if trying to digest an API is a good thing for a beginner but I really need something that has a beginner in mind.I especially liked some of the Microsoft video tutorials on VB.NET so perhaps they offer some on Directsound?The goal is to stream a WAV file, (not just "play it") and I want to LEARN the process.
View 3 Replieshow to convert byte array to memory stream in vb.net.
View 1 Replies
