Just a little help needed. How would I print the text to a label instead of the form. And how would I change the font size. Then how do I hide the form?This will then allow just the text to be shown,
[Code]...
I want to make a program that sends text in the text box to a form on a website and print the page as .xps
View 2 RepliesI cant seem to find any link or topic regarding my problem. I have 2 forms in a project, form one has labels and adjacent combobox while the other form (form 2)has textboxes with adjacent combobox. I am supposed to change the text property of the labels using textbox entry from form 2 and add/delete/change combobox contents in fom 1 using entries combobox at form 2.
View 13 RepliesI haven't been able to find out how to do this but I know it must be incredibly simple.In VB6 it is Form1.Print "text"
View 4 RepliesI'm developing an application for a client, it will be printed onto paper with a specific design already on it, I need to print some text that is on my form, to a piece of paper..
is it possible to print a picture box and it's contents (contents are, labels w/ text, and a panel)?
EDIT: got it to work now, but now I need to draw text at the right locations, which I'm not sure where they are, I've made my app, 855, by 942, and am trying to print on a A4 sheet of paper, and not sure what to do about positioning???
#Region " [pdDocument_PrintPage] "
Private Sub pdDocument_PrintPage(ByVal sender As Object, ByVal e As PrintPageEventArgs)
[Code]....
I am new to the forums and just started to learn vb.net. Currently I am making a project that require a lot of text. Since I would need over 20 labels and do not want to hide every single one, is there a way to place text on a specific place on form through coding. Then, I could just make it a sub and easily hide the text and reveal it
View 2 RepliesI have a label printer (Argox 1000-x) and i want to print some datas on it. And this printer is connected to my computer via the COM1 port. I can open/write COM1. And when i send some data to printer through COM1, Label Printer's Ready Signal Led will be ON/OFF. But it does not print anything or any label..
View 5 RepliesI want to get label's text on one form from another from,i'm working on visual basic.
label's modifiers propert is public and
lblControl.Text = "1"
another form's code is:
Public frm
As
New
Form1()
[Code]....
I have question about Label.Text.
When run the code Form1 load together with Form2.On Form2 I have Label1.I need that Label.Text flicker or blinking.
trying to print a Form that I created using a VB.Net console application. My console application creates an instance of a Windows Form and fills it with data. I then created an instance of the Print Form class from the Microsoft Power Pack and am trying to get the form I filled with data to print but no matter what I've tried it just prints the command console window.
Dim firstPage As New FrontPage 'Windows Form
Dim pf As New PrintForm 'Print Form Power Pack
firstPage.Visible = True
[code].....
I have a label. Whenever i change the text, the text allows extends to the right. How do i get it so that the text extends to the left.Right now, the text covers up the control to the right of the label depending upon the lable text. i want to prevent this from happening.
View 8 RepliesI am developing a testing application consisting of 50 multiple choice questions each with 3 radio buttons to select the answer choices for my workplace and I just had a couple of questions concerning storing user input for review and displaying the next and previous questions. First - Would it be more practical to display each new question and the answer choices on a completely new form or in labels and just have the click event procedure of the Next button change the text properties of the labels and display the new text? Second - I want the application to store the user's answer choices so that at the end of the exam they can see how many they missed, which ones they got wrong, and then print the graded result. I have no idea how to store the input for later review and printing. Lastly - I would like the user to be able to mark questions for later review as they are taking the exam. For example, if the user selects an answer that they are not 100% sure of, the can mark a checkbox so that at the end of the exam they can review the answers they were unsure of. I guess I am just looking for some direction in developing this type of application. As of yet I have only done simple projects for school and this to me seems a bit out of my league. I have already designed the user interface and created a TOE chart but I would like some input on how to actually code the application.
View 2 RepliesI have two forms (form1,form2). Now I have button in form1 that executes to display text into label1 at form2. How to call it? Do I need to have module for this?
View 5 RepliesI am having trouble changing the text in a label. Can someone show me where the problem is?
Public Class Form1
Dim Tracker As Integer = 0
Dim Questions(10) As String
[code]....
I run a thread from my main form that do some stuff i want that each action that the thread do will be written on a lable on the main form. How can i do that? I try to give it a pointer of the form but with no luck since its not allowed by the compiler. here is how i create the thread object in my form:
[Code]...
In a piece of code I am writing I am trying to change the text of a label in my form based on a timer. I have MANY other labels that are all updating in their own subs and when I try to add any new labels(in any sub) to update it wont. I am using Label.Text = counter where counter is a string that is changing. I have tried refreshing the form, Label.refresh() Label1.Update()....The only thing I think it could be is that the redraw is being held up by other calculations on the cpu. How can I make the label text change and update properly?
View 1 RepliesIt didnt work for me and i dont know why. i want to display text on label when the form load.the text to display is according to the enable or disable state of some custom button .
[code]...
I have designed a windows form(to act as a messagebox) with Label and OK, Cancel buttons. I'm on form1 and call this messagebox form in the closing event. If I debug the showdialog of the messagebox form the custom text is displayed on the Label, however if the application is minimized and when i right click on the application in taskbar and select close window then the messagebox form is poped up however the label doesn't show the custom text.
View 2 RepliesI have a Main Module that loads a form. I want to update text on a Label, my code is:
Public mFormSplash As Form = New FormSplash
Sub Main
With mFormSplash[code]....
The code loads the form OK but does not update the Label's text (LabelStatus)I am getting an error Error:
'LabelStatus' is not a member of 'System.Windows.Forms.Form'.
This worked ok on a previous project and I can't work out what is different.
I'm attempting to make a scrolling text label at the bottom of a form. It is the type of scroll you can see on the weather station when there is a tornado warning out. I was wondering if someone could help me go about doing it?
Basically, I am trying to have a label, which scrolls smoothly. The scroll text will be the contents of a string variable. I was also wondering if it would be possible to have the entire scroll "disappear" as the end of it scrolls onto the left side of the screen, then it pauses for a moment, and starts the scroll again, playing an alert tone each time.
I have a picture box with a label underneath it. The text of that label changes based on events. The problem I have, is when the text changes the label is no longer centered underneath my picture box.
View 5 RepliesI have an issue when I place a label box in the MDI Parent form and then open a child form the label box highlighted in child form?
View 6 Repliesform1 have four buttons, i want to set a label text in form2 according to which of the button on form1 is clicked.below is what i tried so far.on form1 each of the button click event i made it focus
Private Sub Answerbtn3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Answerbtn3.Click
Me.Focus()
Form2.Show()
and on form 2 load event i have
Private Sub FinalAnswer_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Main1.Answerbtn1.Focus Then
Label2.Text = "You choosed option '
[code]....
the above code displays only the first condition ("You choosed option 'A'"") on the label when any of the button is clicked?
I have a problem to solve and not quite sure if the way I think is correct.
I have a main form class MainForm the class has got: a variable call Value and a label called LabelValue
Now I would like to automatically update LabelValue every time the Value changes his value
How do I show timer countdown to a text label in form? I have the following code set up:
[Code]...
What I'm trying to do is when I click button 1, timer start countdown from 15 sec. I want to be able to show this timer in sec and millisec in form in a text label so the user can see how much time they have left. (example: 12.56 sec remaining)
I am working on my final and when I run the program it throws an error saying "A first chance exception of type 'System.InvalidCastException' occurred in Microsoft.VisualBasic.dll" I am still a novice at VB and do not understand this error or what the fix would be. I know what part of the code is breaking it though and it is highlighted in red[code]....
View 6 RepliesI have been able to do the exercise's in the first 2 chapters and half the exercise's in the third chapter of the text book (programming in visual basic 2008, Julia Case Bradley & Anita C. Millspaugh). but this one is making my head want to explode. please point me in the right direction with this.
Heres the problem. The company has instituted a bonus program to give its employees an incentive to sell more. For every dollar the store makes in a four-week period, the employees receive 2 percent of sales. The amount of bonus each employee receives is based upon the percentage of hours he or she worked during the bonus period (a total of 160 hours). The Calculate button will determine the bonus earned by this employee, and the Clear button will clear only the name, hours-worked, and bonus amount fields. A Print button allows the user to print the form. Do not allow missing or bad input data to cancel the program; instead display a message to the user.
Here's my code so far. its giving me the wrong results. i have tried many different ways,(hence the commented code) but I just dont know where im going wrong.
Public Class VB_Sales
Const BONUSHOURS As Decimal = 160
[CODE]..............
Attached image(s)
my form is print this method:
e.Graphics.DrawString(C11.Text, fntCode, Brushes.Black, 165, 33)
e.Graphics.DrawString(CP11.Text, fntFS, Brushes.Black,170 , 38)
e.Graphics.DrawString(CF11.Text, fntFS, Brushes.Black, 165, 43)
when all label text lengh normal for print is this:
but when label 1 and or label 2 and or label 3 text lengh change to short or long
print future is very bad ; this simple:
how to print label 2 centered label1 and all 3 label print centerd labels?
i want every time print future simple picture1 ; how to do?
I Have a very big Value which is 8.93316088280648E+118
How do I print that value into a label without the E+?
im using crystal report in vb 2005. how to import the data from the textbox or label on the form to the text on crystal report using a button.
View 2 Replies
