Programatic Access To Project's Application Root Namespace Properties?

Jan 25, 2010

How does one gain programatic access to the information that is entered into the "My Project" properties Application section?I am able to pick up the assembly name from those properties, but I haven't been able to pick these up.Below is the line of code that makes me interested in picking this up programatically. I have found that if the name within the quotes for Sections (GenConfig) doesn't match exactly what is entered in those properties, I will get an application error during run time.How do I reference that property?Is there a better way to pick that value up?

Dim applicationSettingsSection As ClientSettingsSection = config.SectionGroups("applicationSettings").Sections("GenConfig.My.MySettings")

View 4 Replies


ADVERTISEMENT

VB - Root Namespace In The Domain Project Is Blank

Feb 10, 2010

I have an VS2008 solution with 2 projects, WebUI and Domain; WebUI references domain. The Root Namespace in the WebUI project is:MyCompany. MyProjectName.WebUI. The Root Namespace in the Domain project is blank. (Namespaces are manually declared for all classes). So everything has been working fine, until I tried to reference a class in Domain via a fully qualified path: [Code]

Does this make any sense? So, then I cleared my WebUI Root Namespace, and voila, the fully qualified declaration then does work. However, doing this then seemed to invalidate the registration of all my user controls on my pages. The only thing that seemed to solve this was in the codebehind of each user control, manually add a namespace of MyCompany.MyProjectName.WebUI. which might make sense as perhaps the namespaces of the pages somehow had still retained the root namespace value. But, if I was to create a brand new aspx page and drop a user control on (this is before manually adding the namespace), even that page couldn't properly register it. Yet, the user control properly rendered in design view. so the VS UI seemed to be able to properly resolve it, but the compiler seemingly can't.

So from what I can tell, I can at least get things to work by manually wrapping user controls in the proper namespace. Why this is necessary for aspx pages, that have no namespace specified, to see the user controls, seems to make no sense. Is there some fundamental principle I am misunderstanding??

View 2 Replies

VB 2008 - Setting Root Namespace Name Of A Project

Feb 9, 2009

I VB 2005 you can set the root namespace name of a project under the project properties. Where can I set this using VB2008?

View 4 Replies

.NET Web Service Root Namespace

Jan 6, 2010

I'm trying to set up a .NET 3.5 web service project in Visual Studio. My goal is to include a namespace in this web service that I can expose to web applications that references this web service.I have added the namespace "MyWebservices", but I am not able to find it after referencing the web service.[code]I have also attempted to modify the "Root Namespace" property of the web service project, but I can't get that to work for me either.

View 3 Replies

How To Change Root Namespace

Feb 28, 2010

How to change root namespace of my program

View 6 Replies

Way To Escape Root Namespace

Aug 21, 2009

[code]How do I do this in VB, while having a root namespace in the application, is this possible?

View 4 Replies

IDE :: Project No Longer Recognises XML Documentation, And Does Not Access Namespace Correctly

Sep 30, 2010

I've just picked up a project from someone who has recently left our company, and the project file for the project has somehow had XML documentation deactivated. Typing ''' no longer automatically creates XML documentation segments, and existing XML documentation within the code does not show up in Intellisense, and is also not correctly highlighted as XML documentation.

In addition, the Intellisense for the My. namespace contains only MySettings, Resources and Setting under the "All" tab. Everything else is missing. Attempting to manually write My. namespace code results in compile errors. These are not problems with the IDE; I can start a new project and both Intellisense and My. work fine in these new projects. I can only assume that this is something which has been set on the project itself.

View 3 Replies

Find The Root Of A Number Such As The Square Root, Cube Root 5th Root Or Whatever

Sep 23, 2011

For those of you interestested in mathematics you can find a root of a number in two different ways. Lets say you want to find the 5th root of 27.

[Code]...

View 2 Replies

Close Application Root Folder Or Sub Root Folder At The Time When Application Is In Running Mode?

Oct 8, 2009

how to close application root folder or sub root folder at the time when application is in running mode?

View 7 Replies

.NET Namespace Regarding Explict (named) Versus Implicit (global Or Root) Namespaces?

Sep 27, 2010

I have a solution that contains many projects all using the same root namespace. No code files explicitly name a namespace. So lets say the root namespace is ExampleRootNamespace.Now a problem comes into play when I want to add an explicitly named namespace to one of the code files I am working on. I want to be able to isolate this code from the rest of the assembly to be able to run FxCop against it. So I add something like Namespace Interfaces.CSV to the code file.

This causes any code that references this assembly to need to say Imports ExampleRootNamespace.Interfaces.CSV. So far so good. I can even run FxCop against the assembly. The problem now is that in other assemblies I cannot say any longer things like:

Public class frmInputBoolean Inherits
ExampleRootNameSpace.frmFormTemplate

Visual Studio is now asking me to rename the namespace to:

Public class frmInputBoolean Inherits
Global.ExampleRootNameSpace.frmFormTemplate

There are hundreds of errors related to this. So my questions are:

1) Why would basically naming a namespace under the root for the first time cause issues with the program?

2) Are there any workarounds to this issue without renaming?

I also want to add that with regards to ExampleRootNamespace.Interfaces.CSV I am not referencing this anywhere in the codebase. I'm currently just referencing it from a unit test project. So I don't see why adding this namespace causes an issue.

View 2 Replies

Deployment :: Application Icon Setting In Project Properties

Jun 5, 2009

I have a icon for my application that I set in the project properties window there is a little drop down box to browse to the icon location. While debugging everything is good. Once I build the app and place it on a PC and manually start the app all is good. My app starts with windows and now every time the program goes to start I get an error that the icon cannot be found in the DocumentandSettingUSERNAME folder. So the question is do I have to place my app icon in this folder? In design I have the icon in the binDebug folder and that is were I point to in the Project properties page.
I am using VS 2008 VB.net.

View 1 Replies

Access Application Properties Of Application In Run Time?

May 19, 2010

Is it possible to access Application Properties of my applicaiton in run time ? Please refer the below attached image (I want to access the Title and Category properties in my application)

View 5 Replies

Access Objects / Properties In An Application From Another DLL

Jan 31, 2006

I have an application which is grouped in a MainApplication and serveral Modules (DLL's) The Main Application is basicly a Form with a NavigationBar on the Left Side (like in Outlook 2003) and an MDI-Parent. There is also a Simple Login Routine on this Form. I store the UserName after Loggingn to a Property. The DLL's holds functionallity and Forms for various Sections for example there is a Employee.dll which holds functions and a form to show all Employees.

On Loading of the Main Application I loop trough all dll's in a "Module"-Folder and extract NavigationItems from them which I add to the MainForms NavigationPanel. I don't have a reference to the Modules because I want to make it as flexible as possible so that it is possible to delete a Dll form the Module directory in order to remove the functionality from the MainApplication. The Modules could work also without the MainApplication if they are Complied as an exe insted of DLL of course. This works fine so far.

[Code]...

View 2 Replies

Project Using VB And A Database In Access - Check If My Application Requires Access To Be Installed Or Not?

Feb 16, 2012

I'm using VS 2010, and I did a project using VB and a database in Access. The problem is that when I try to put that "application" on other computers, sometimes, is not working. I thought it can be because on these computers they don't have access, but on one computer, is running another app which is using Access and there is no Access installed. How can I check if my application requires Access to be installed or not?

Here is a example of how I did the connection:

Public AccessOLEDBConnString= "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & myfullpath & ";Jet OLEDB:Database Password=password"

Function getConnection() As OleDb.OleDbConnection

[CODE]...

And when I want to have access at the data I'm doing like this:

dim conn as Oledb.OledbConnection

dim sql as string

dim ds as Dataset

[CODE]...

View 9 Replies

Enable The "Make Single Instance Application" In The Project Properties?

Jun 29, 2010

If you mark your application using "Make Single Instance Application" option in the application settings tab and run your application under a GUEST account or a restricted limited/standard account the application throws UnAuthorizedAccessException or CantStartSingleInstanceException.

Take the following steps to reproduce this behavior.

1) Create Windows Form application.

2) Enable the "Make Single Instance Application" in the project properties.

3) Log onto a GUEST account and open the application twice to simulate StartUpNextInstance.

We need developers to reproduce this behavior and post any valuable input if you experience these symptoms.



When posting information please include the following:

a) The operating system version + service pack.

b) The .NET framework version used.

c) Verify this symptom is present when running under GUEST account.

To workaround this issue turn off the "Make Single Instance Application" option ad create a Local named mutex in the StartUp() event.

[Code]...

View 8 Replies

Compiler - External-only Properties Or Methods - From The Internal Namespace?

Nov 30, 2009

Is there a simple way in vb.net to mask a public property or method from the internal namespace? It would be helpful as a refactoring tool to isolate internal dependencies and perhaps to enforce a non-recursion policy for external services.

View 2 Replies

C# - Dll Reference Of One Project Into Another Project - Error Of "Type Or Namespace Name Could Not Be Found"

Apr 25, 2011

I have 2 projects, one built in VB.NET and another in C#.NET. I want to use certain functionality of VB.NET into C#.NET and hence I have added the dll file of VB.NET solution into C#.NET as a reference by browsing the dll from my system. Say dll name for VB.NET is myData.dll. In my C#.NET project I am trying to declare it as a namespace i.e. "using myData;" and its giving me an error of "Type or namespace name could not be found"

View 1 Replies

What Are Classes , Objects , A Namespace , Subroutines,functions,methods,properties And Difference Between Byval And Byref

Jun 26, 2010

I want to know what are classes , objects , a namespace , subroutines,functions,methods,properties and differemce betweem byval and byref in your words.

View 18 Replies

.net - Reference 2 Dlls Using The Same Namespace In 3.5 Project?

Jun 29, 2011

I have a vb.net 3.5 class library project that needs to reference two assemblies that have the same namespace. We have two third party dll's in which one is version 5.1 and the other is version 6.1. They have the same dll filename and they utilize the same namespace and functions/class names. The project needs to use one or the other depending on a specific situation. I've investigated up on a c# process that uses the "extern alias" feature to pull in the different assemblies.

[URL]

What use is the Aliases property of assembly references in Visual Studio 8.It seems that this feature isn't fully available for vb.net. Things I've Tried I've renamed the 2nd dll and added both references to my project. At this point I get tons of: 'blah' is ambiguous in the namespace. So I need to alias the different versions. In vb.net you can do aliases on an imports statement like:

Imports version5 = Somedll.Something

The problem is I can't setup an assembly reference alias for the different versions of the dll. Apparently in vb.net you can't set these up in the reference properties window. So I tried setting them in in my project file like this:

<Reference Include="somedll.5.Navigation">
<HintPath>....UtilityThirdPartyDLLSsomedll.5.dll</HintPath>
<Aliases>SomeDLL5</Aliases>

[code]....

I would then expect this to work:

Imports version5 = SomeDLL5.Something
Imports version6 = SomeDLL6.Something

But the "SomeDLL5/6" doesn't show up in intellisense. So how can I reference both dll's in the same project?

View 3 Replies

Namespace / Project Design General

May 14, 2009

I'm trying to make more use of namespaces and giving my project a more rigorous design, as it has been getting pretty messy.I was wondering,before I get started, is there a standard convention for the names and organization of namespaces?For instance,for a 3-tier program, should there always be a "UI", "Business",and "DataAccess" namespace (and is this what they're typically called)?Or should I just organize the project as I see fit?

View 2 Replies

Using Namespace To Assess Property Of Another Project

Jan 3, 2010

I want to use project B property in project A. Hence, I added project B to my solution. How can i use the property of B? Can someone guide me? i'm new to vb.net..To my knowledge, we need to use namespace and create a new instance. Could someone guide me on how to use namespace for this purpose?

View 1 Replies

Get The Application Root Directory Path?

Oct 3, 2010

here i am getting this path

System.Windows.Forms.Application.StartupPath
"D:ProjectsCompan1Compan1binDebug"

but i want to load report1.rpt that is reside in Reports folder under application root like we did in asp.net application

Dim rptPath As String = Server.MapPath("~/Reports/rpt1.rpt")
If ds.Tables(0).Rows.Count > 0 Then
'Report.Load(System.Windows.Forms.Application.StartupPath & "/Reports/" & ReportName & "")

[code]....

View 14 Replies

IDE :: Copy Dll To Application Root Directory?

Oct 6, 2009

Where do I add the dll to my project, is says to add it to my application's root directory? I am using VB.Net Express, windows form application.Close counts in horseshoes, handgranades and nuclear missiles!

View 2 Replies

.net - Make A Namespace To Be Viewed By All Project Without Necessary Imports?

May 11, 2011

I'm developing an web application using VB.Net, and I would like to know, if is there any way to make a namespace to be viewed by all project without necessary Imports?

View 1 Replies

How To Add A Refrence ( Specialy ) From The Root Folder Of My Application

Apr 24, 2010

Ex. The user of my applications extracts the app on his desktop or anywhere well i do not know how to add the refrence from the code? like :

AddRefnrece(Application.StartupPath & "data.dll") or what ?

Other Useful info :

I am using Visual Studio 2008/Visual Basic 2008

View 6 Replies

VS 2010 Can't Access Files Below Root When Using Process To Run A Command Line Program

Feb 4, 2011

I am trying to create a program that downloads audio files via FTP, converts the audio to mp2 if necessary and copies them to a certain directory for consumption by our automation system. (I am a radio station engineer.)I am using the open source converter FFMpeg to convert audio files to mp2. This is a command line exectuted program. Here is the command line that I use to execute the external program with the input and output audio files at the root level: cmd.exe /k ""C:New Folderffmpeg.exe" -i "C:Test.mp3" -y "C:Test.mp2"" This command line works correctly whether I am using Shell() or System.Diagnostics.Process (Process) to execute the external program. I am going the Process route so I can know when the conversion has finished.Now, I really don't want to use the root directory for this but when I go below root with this line using Process the external program will not execute:[code]Can anyone tell me why that line will not work with Process though it works as expected with Shell()? I can't figure out how to stop the external program to get some feedback as to what its problem is.

View 7 Replies

Import Project Namespace Into A View In Order To Use The Custom?

Jun 20, 2012

I am trying to create a custom LabelFor helper to apply by default instead of the standard LabelFor helper include in System.Web.Mvc.Html. I want my LabelFor to take model properties that are PascalCase and make a label that appears as multiple words. For example the property FirstName would appear as "First Name".

I found this post that shows how to make a custom LabelFor helper that allows the addition of html attributes. I recreated this helper in VB.Net and modified it to do what I want, but I am not able to get it to work.

[Code]...

The sample includes this Module in Namespace System.Web.Mvc.Html but when I add the namespace declaration to this module everything in the rest of the project goes haywire. For example, each of my models has a Primary Key property that is a Guid datatype and as soon as I add the namespace above to the module, I get several errors stating that System.Guid is not defined among other similar errors.

I've tried to import my project namespace into a view in order to use the custom helper, but then I get an error that says Overload resolution failed because no 'LabelFor' is most specific for these arguments.I am trying to avoid having to specify a DisplayName for every PascalCase property I have in many models.

View 1 Replies

Program To Create A Class Outside The Default Project Namespace?

Dec 5, 2009

Is that possible to create a class in vb.net that is not in the default namespace of the project?

for example, say you have a project call sample1, then automatially IDE will have everything default to the Sample1 as your namespace root rather than under global, which is find for most case.but I want to create some classes that is directly under global namespace

View 7 Replies

Import System.ServiceProcess Namespace Into WPF Project Not Showing In CodeSense?

Mar 4, 2009

how can I import the System.ServiceProcess namespace into a WPF project in VB.net (not C#)? The ServiceController object is not in the toolbox in VS2008 and can't see to figure it out. Any ideas? If that particular namespace cannot be imported into WPF projects, could somebody suggest another way of controlling windows services from a WPF application? I know this framework is focused more on multimedia apps, but would really like to switch over some of my tools to WPF.

View 2 Replies

ASP.net Page That Links Automatically To Files (pdf) Stored In A Folder In Same Root Of Web Application

Jul 9, 2010

I need to ASP.net Page that links automatically to files(pdf) stored in a folder in the same root of the web application..so the script will read the contents of the page , if the file is available in the folder it should create a link to it automatically and if not it stays static text.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved