Put The Value In The Textbox Fields?
Oct 1, 2011I am trying to put the value in the textbox fields. I do have a working query for it.
here is my code:
[Code].....
I am trying to put the value in the textbox fields. I do have a working query for it.
here is my code:
[Code].....
i have a form issue and return form. where Issuer_ID is the primary key, this form uses for boht emp and for student issuing book. at run time the user has to select a radio button for student or for employe. if he select student so after entering the full information when he press submit button so student query is execute and data stored in database, keeping the Employee field null, and when user select the employee radio button and after pressing the submit button, so employee querry executes and stores data in employee field, keep the student filed null. remmber and Student ID and Employee ID or foreign keys in isuee and return table and radiobuttons are not the part of database, its just on form.
now i want that when a user gives his issuer ID and at the lost focus event of issuer id, it is checked that if the record exists so the data is bind on the form, if does not exist so the user has to make entry, but if the data loads on form so how user will find out that this data is of student or of employee?
I'm unsure as to how to take two pieces of information from a table and display them into a textbox. The textbox should display the 'Balance' and the total money available for withdrawl (balance + overdraft limit). I believe I need to use the data bindings command e.g. TextBoxDetails.DataBinding.Add?
View 1 RepliesFirst off, let me apologize for my wording. I'm a student programmer and code primarily in JAVA so my my lingo may be a little skewed.I have created a method to create text boxes in my program that all have the same properties (ie certain text, size, font, fore color, backcolor,etc.) that looks like this:
[Code]...
I'm quite new to VB.net (and VS 2008), so I'm afraid my question might be basic, but I'm not sure how to solve it.I have a winform with three textbox fields and a button. All textbox fields must be filled before the user can click the button to continue. To this end I would like to disable the button as long as there is at least one empty textbox.
If I had only one textbox field, it would be easy for me to do. In the Textbox1_Leave event I would check if Textbox1.Text is not empty and if so, set Button1.Enabled = True.But what should I do if I have three textboxes? Have three event handlers, one for each textbox? Or is there a way I'm not familiar with?
I'm facing a problem with my current member card reader development.
I'm reading the card number (just a serial number of 4 digits) with a card reader. this seems to work fine (even converting the text string to integers).
This number is then put in a query to find the exact record that corresponds with this number
Me.JSM_LedenTableAdapter.GetDataByKaartnummer(IntCardNr)
Have anyone developed a textbox where it is possible to display 2 fields in the textbox. We want to be able to show ID + description in the same textbox. (When user enter the textbox description may go away and the user can enter an ID)
View 2 RepliesI have a form (formA) which contains a tabcontrol with two tab pages. Each tabpage has 6 textboxes and 3 comboboxes. In addition to the tabcontrol there is a separate combobox and textbox. The question I have, is how to best ensure that all these fields are populated with text and or numbers? From this a start button is pressed which generates another form (formB) which requires the fields from (formA). If for instance 1 or more fields is not populated, then generate a message to show the user which 'box' requires data. Only when all fields are populated will this enable the 'start' button.
View 5 RepliesI am making a booking system. I am using same form for insertion and updation. How can I update by taking the values from the textboxes. For example if the user enters value for just 2 out of 8 fields then How can i update just 2 fields without affecting the rest of the record. I mean to say that if I use a single update query using all the fields then if some textbox is left empty then it will replace the database field value by null or something else.
View 2 RepliesI'm currently refactoring an old Visual Basic DLL (VB.Net), which stores all of its data in one module called Globaldefinitions as public fields. There are about 200 fields, referenced thousands of times all around the code:
Public Module Globaldefinitons
Public a As Short
...
Public zz10 As Double
[Code]...
I need to change the module into a class with non-shared fields. This means, each and every of these thousands of references needs to reference the instance of that class:
globalDefinitionsInstance.a = 5
How do I go about this efficiently?
Regular expressions operating on the source fall flat. Refactoring tools like Re-Sharper or CodeRush don't seem to offer this functionality. Visual Studio 2010 cannot do it automatically either.
Class Foo
ReadOnly name As String
Public Sub New(name As String, dependentUpon As Foo)
Me.name = name
[code]....
The output of New Bar() is:
Dependent created. Dependent upon nothing.
Independent created. Dependent upon nothing.
It seems fields are initialized in the same order as they appear in the source code, which (a) leads to an unexpected result, and (b) seems a little puzzling, given that one is normally not permitted to read from uninitialized variables in .NET, yet that seems to be working fine above.I would've expected VB.NET to be smart enough to initialize referenced fields first, and only then those that reference it; i.e. I'd have liked to see this output instead:
Independent created. Dependent upon nothing.
Dependent created. Dependent upon Independent.
how to get VB.NET to behave like that instead, without simply having to swap the declaration order of dependent and independent inside class Bar?
I'm trying to create a table in Word using data from a table in Access. There are four fields in the access table that I need. 3 fields are text which I can populate the Word without any issues. However the fourth field is a memo with >255 characters.I'm struggling to come up with the proper code to allow me to populate the Word field with the memo data that has more than 255 characters. The code I have so far is listed below. But when it hits the memo field, it crashes on the line I marked with **. I know it's not text, but I've tried many different field types, but nothing has worked so far.[code]...
View 1 RepliesMy intent is to have the code - on a button.click event - check the Username and Password fields and return an error depending on which is wrong. Or if both are wrong, return a different error message. I've set the username as parts and the password as parts (still learning how to use external authentication). [Code]
View 2 RepliesI have several sqldatasources for my gridview. All of the columns are autogenerated. However they all have some consistent fields and I'd like to make those fields template fields so I can modify the edit template for them such as adding a drop down menu. Is this possible?
View 1 RepliesMy database : table1
ID FIRSTNAME AGE
1 Sumit 22
2 Sanjeev 23
i have gridview 1 and textbox1 and button1 i want when pages load the gridview displays the all records from table1 and also ...i i wanna search record for firstname by typing sumit in textbox1 and click on button1 then in gridview the record of sumit will be shown ..by default gridview display alll records from table1 How to do this My Selct Query is below : but it doesnot display all record ...but it can display record if you search for a particular record .
[Code]...
[code]....I have a dialog that comes up and asks for a reason for declining the business.I don't want the code to move on after not enabling the "me" until the reason has been entered and saved into the database. Also, at that point where it says "I WANT...." I want to copy the textbox fields into a new database and then delete this entry from the database, how can I do that. I am using VS 2008 and SQL.
View 2 Repliesexperience on how to create an engine using C# (VB.NET is okay too) that is generic enough to handle most cases of MS Word text fields I need to fill with data I'm getting from a database? In short, I'm about to embark on this little Office automation excursion and I'm hoping a little bit of feedback here.
View 2 RepliesI have a table which contains a list of products for a company. They input data about how much stock they have and also the level at which they want to be reminded that they need to order new stock.
[Code]...
I want to list all the true results in a form which the user is then able to navigate through. What would be the best way to go about doing this?
how to execute this SQL Statement
Scenario:
Given Tables T_Data, T_AllDesc, T_System1, T_System2
Given Fields:
T_Data= f_id, f_Desc, f_CreationDate, f_CreationTime, f_System1, f_System2
[Code].....
I'm creating a Process Control application that will save various data fields to SQL Server 2005. Part of the data will be input via a VB hand-held application which was created on the CE 5.0 - we are running VB.NET 2.0 on Visual Studio 2005. The rest of the data will be collected via plant equipment which will interface will PLCs on the production floor. There are approximately 25 different attributes which will be stored in a SQL server table.
The user wants me to create 3 alert levels that will involve:
1) Checking to see IF a reading was manually input.
2) Checking to see if the value passed or failed.
The FIRST alert involves notifying the operator via the hand-held or some other technique. The SECOND alert involves checking back after a set time interval (15 minutes, 30 minutes, etc.) to see if the attribute passed or failed and then taking a higher action - such as an email, text message or phone call to a higher level manager. If the second check fails, the same escalation process continues with the THIRD alert level - and another action takes place such as a message being sent to yet a higher level manager.
Presumably, once the status check passes, the alert level is re-set back to 0. But I'm thinking that the process that checks for the failed attributes will need to continue to run in the background - probably at set intervals. I'm not sure if the functionality for this is something that would be best handled by VB.NET or SQL Server...
I have two money fields in a SQL database called TotalClaimed and PartialSettlementAmountRecd.They are declared as Decimals like so:
Public PartialSettlementAmountRecd As Decimal
Public TotalClaimed As Decimal
They both output the repsective amounts perfectly. I need to do a calculation on them, by subtracting PartialSettlementAmountRecd from TotalClaimed. I have tried the following, but it just outputs a random number, not the amount I require.
Dim NewSettAmount As Decimal = (ClaimDetail.TotalClaimed) - (ClaimDetail.PartialSettlementAmountRecd)
Response.Write("New Settlement Amount: £" & NewSettAmount)
I have the aplication which requires name fields... and i wan tto clear these fields whenever i closed the application using close(X) button. i dont want to use 'clear' button.
View 3 RepliesI have a class being populated from comma separated rows in a text file.I am trying to have the name property of each object appear in a listbox, then have the rest of the properties of a selected object show up in text boxes. How do I load the properties of the selected object to the correct textbox?
View 2 RepliesI have a code that I found as a VBS and ported it to VBA and works perfectly, but I am now trying to run on VB.NET 2010 but am getting a Path not found error. I am trying to get the complete name and e-mail from the Acitive Directory from the current user.[code]
View 21 RepliesI have a function that writes value of dynamic textboxes (quantity & price) and their sum (value) into sql db, all in other column. Now there multiple entrys for the sam user (ID). Now I would like to know how can I get the sum of the value3 fields in the db to the vb.net form?
this is my code:
Dim kol As String = ""
Dim cena As String = ""
Dim znesek As String = ""
[Code]......
So this is my code
Private Sub SK_btn_OpenFile_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SK_btn_OpenFile.Click
Dim sLine As String = String.Empty
Dim sAllTExt As String = String.Empty
If SK_OpenFileDialog1.ShowDialog() = DialogResult.OK Then
[Code] .....
The text that appears in my textbox is this
Person 1 * 12 * 123.45 *
Person 2 * 24 * 2345.78 *
Employee 1 * 34 * 23.34 *
Employee 2 * 123 * 11.23 *
I want to take the average of the 2nd field. Each field is separated by "*". I have to use the format display 2 integer digits and 2 decimal digits.
So in this case
12, 24, 34, 123 are the numbers
I have to do the same thing for the 3rd field. But I got to add all 3 numbers instead. and use format to display five integer digits (with leading zeros), and 2 decimal digits.
I am new to VB.Net and was using VB 6.0 for the last 10 years. I am having some difficulty in accessing fields and changing these.[code]...
View 4 RepliesIs it possible to have a Textbox on a form that when the user inputs data, ( during Runtime )that data remains in the Textbox for good and the Textbox then becomes read only ? Is it also possible to make it so that the CD with the programme on, is in the PC when the programme is being used. Perhaps writing the Textbox data back onto the CD ?
View 1 RepliesI wanted to know what 'Fields' are in the Class Designer.
View 11 RepliesI am trying to populate a web from from a SQL table.
Public Class userDetails
Public address1 As String
Public address2 As String
Public city As String
[code].....
however, there are like 50 fields in the User db, and it seems like a lot of retyping...