I am trying to populate a web from from a SQL table.
Public Class userDetails
Public address1 As String
Public address2 As String
Public city As String
[code].....
however, there are like 50 fields in the User db, and it seems like a lot of retyping...
CODE:
This tells me "End of Statement" is expected. I'm trying to instantiate a new form, and I'm trying to pass information into the form that I will use to populate other data fields on the form.
I've tried looking up constructors, but I can't find where my is different than other examples.
experience on how to create an engine using C# (VB.NET is okay too) that is generic enough to handle most cases of MS Word text fields I need to fill with data I'm getting from a database? In short, I'm about to embark on this little Office automation excursion and I'm hoping a little bit of feedback here.
View 2 RepliesI am trying to auto populate some fields in my datagridview on my form called frmInfo.
I will try to explain what I need. The main form of my project is called frmEntry. frmEntry is mainly a data entry form only. A binding navigator is present to navigate between different record stored in the database. I want the datagridview on frmInfo to "grab" info present in the text fields of frmEntry.
how i can implement below requirement using asp.net and vb.net.I have three fields in a form which are filled by users. Based on these three values, i need to auto-populate the 4th field.I have planned to implement this in the following way.Write a separate class file with a function to calculate the possible values for the 4th fields based on 1st 3 inputs. This function can return some where between 1-10 values. So I've decided to use drop-down for 4th field, and allow users to select the appropriate value.Call the above function in onchange function of 3rd field and take and use the return values to populate the 4th field. I'm planning to get the return values in array field.(Does this need a post back?)
View 3 RepliesI need to populate listbox datavaluefield with multiple field. The value will be coming to datatable - (dataset). I can't change the sql statement because it is under stored proc that uses globally lstSearchResult.DataSource = dt lstSearchResult.DataValueField = "EMP_ID" & "LNAME" &"ADD" ->> could it be possible lstSearchResult.DataTextField = "LNAME" lstSearchResult.DataBind()
View 1 RepliesI'm trying to create a table in Word using data from a table in Access. There are four fields in the access table that I need. 3 fields are text which I can populate the Word without any issues. However the fourth field is a memo with >255 characters.I'm struggling to come up with the proper code to allow me to populate the Word field with the memo data that has more than 255 characters. The code I have so far is listed below. But when it hits the memo field, it crashes on the line I marked with **. I know it's not text, but I've tried many different field types, but nothing has worked so far.[code]...
View 1 RepliesI have WebBrowser1 and this code on a button: WebBrowser1.Navigate(URLBox.Text) That all works fine and I can enter text and go to the webpage. How do I:
1. Check for when the page has finished loading?
2. Auto populate 2 fields on the webpage and click login?
Currently working on a project to automate the input based on the Summary file (xls format)
1. I want to be able to do the following: update, append, delete and populate the records to the various files based on two distinct fields, column A & F (see attached file).
2. Researched the process, requires knowing VB codes, are you familiar with this language? If so, how can I simplify the process? Please advise.
3. The files will reside on the SPP.
I have a table with many fields when I drag the details from the data sources tab to the form some fields do not show, and they go beyond what I can grab with a "blind group select" (I marquee beyond the bottom of the form and catch fields that I cannotsee). What can I do to place all fields on my form.
View 16 RepliesI am trying to write an Afterupdate Event code that will automatically update one field if a corresponding value is selected in the other field
View 3 RepliesHow to populate the txtboxes in another from by clicking the datagidview(in another form).
when I double click the item in datagridview, it will show the following information in the another form.
I'm currently refactoring an old Visual Basic DLL (VB.Net), which stores all of its data in one module called Globaldefinitions as public fields. There are about 200 fields, referenced thousands of times all around the code:
Public Module Globaldefinitons
Public a As Short
...
Public zz10 As Double
[Code]...
I need to change the module into a class with non-shared fields. This means, each and every of these thousands of references needs to reference the instance of that class:
globalDefinitionsInstance.a = 5
How do I go about this efficiently?
Regular expressions operating on the source fall flat. Refactoring tools like Re-Sharper or CodeRush don't seem to offer this functionality. Visual Studio 2010 cannot do it automatically either.
I have a problem trying to copy 3 fields on a form to a database. The reason I cannot seem to do it is that the last field asks how many copies you want to save in a combo box. So lets say the user selects 3 I need to be able to copy three sets of the same data to the database.
View 2 RepliesI'm using simple data binding and have in total 3 fields on my Form and 2 of them are hidden. The two hidden fields are calculated by filling in the first one. bellow you find the code I'm using, when the update is done only the first field that is fill in is written to the Database. How can I change the code to get all 3 of them written to the Database
Public Class frmLicenseKey
Inherits System.Windows.Forms.Form
Dim dsLicenseKeyInfo As DataSet
[code].....
I am trying to dynamically add label fields for a form. Just to test I am trying to write in just one label field. Every time I debug the program though I dont get any labels added to the form. Stepping through it looks like the properties are being set correctly.[code]
View 3 RepliesI am developing an application in which I would like to let the users design some forms and decide the fields that are in the form.An example is better than a poor explanation, so let me put the example of Microsoft CRM in which you as end user can define a form, the fields in that form, or customize existing forms by adding or removing fields.
View 5 Repliesi have this code which i am using to display data on fields on form.And if i read from the database and the reader has no rows the ballon tool tip should display from some time indication a message.The problem is anytime i select from the database and the if all reader doesn't have rows only the last message of the ballon shows.the rest doesnt.Please what have i done wrong
[Code]...
Class Foo
ReadOnly name As String
Public Sub New(name As String, dependentUpon As Foo)
Me.name = name
[code]....
The output of New Bar() is:
Dependent created. Dependent upon nothing.
Independent created. Dependent upon nothing.
It seems fields are initialized in the same order as they appear in the source code, which (a) leads to an unexpected result, and (b) seems a little puzzling, given that one is normally not permitted to read from uninitialized variables in .NET, yet that seems to be working fine above.I would've expected VB.NET to be smart enough to initialize referenced fields first, and only then those that reference it; i.e. I'd have liked to see this output instead:
Independent created. Dependent upon nothing.
Dependent created. Dependent upon Independent.
how to get VB.NET to behave like that instead, without simply having to swap the declaration order of dependent and independent inside class Bar?
My intent is to have the code - on a button.click event - check the Username and Password fields and return an error depending on which is wrong. Or if both are wrong, return a different error message. I've set the username as parts and the password as parts (still learning how to use external authentication). [Code]
View 2 RepliesI need to build a rather simple form for collection some information from our membership. It has 4 Text boxes and one Submit button. The contents of the text boxes need to be emailed to a fixed Address and a fixed Subject. Before I got to fancy I tested the form to see if the email portion worked which I did get the email but not all the data. I am trying to stick with VB as I had experience with it years ago.
My problem seems to be in building the string for the body of the message. Trying to use StringBuilder but my syntax is messed up somewhere. The Fields that I have are: Name, Phone, Email Address: and Comments. They are named in the form as txtName, txtPhone, txtEmail and txtComments. [Code]
I am an experienced programmer but am new to VB. To start, I am trying to create a simple database program. (My ultimate goal is writing a comprehensive database program in 6-8 months)I have created the database and bound the fields to a form.
But what I want to be able to do is add a field to the database and then also bind that new field to a textbox on the form.The new field appears on the list in the Server Explorer window (on my left) but not in the data sources window (on my right.) The data sources windows has a "refresh" option but that does not help.When I manually add a textbox and try going to DataBindings in the property window the new database field is not listed.
I have been placing my database fields (details view) on a form but for some reason they are all appearing as text boxes with the exception of date fields. Why are none of them showing as drop down lists?
View 1 RepliesTry
If Me.CompanyNameTextBox.Text.Length = 0 Then
MessageBox.Show(
[Code]....
i want to exclude some form fields when processing a postback. I done the following but having some issues:
Dim rtnValues As New StringBuilder
Dim arrJoinValues As String = String.Join("|", _setFormValues.ToArray)
Dim arrSplitValues() = Split(arrJoinValues, "|")
[Code].....
I am developing an application on VB2008 with MySql as database. I opened the connection without any errors. I have three fields/columns in my database and on the form. When I am running vb form data is not reflecting on to form fields.
I have written the following code in form load event.
'Dim cn As ADODB.Connection
'Dim rs As New ADODB.Recordset
'cn = New ADODB.Connection
'cn.ConnectionString = "DRIVER={MySQL ODBC 3.51 Driver};" + "SERVER=localhost;" + "DATABASE=in_out;" + "UID=root;" + "PASSWORD=pacvision;" + "OPTION=3;"
'cn.Open()
'MessageBox.Show("Connection Opened Successfully")
'rs.Open("Select * from deptno", cn.ConnectionString, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)
I have finished my database using Dreamweaver ASP VBScript and Access, the only thing left is to create the searching system. My search form works fine when posting just one filed. The results page Recordset goes as follows.
Code:
I need 7 different fields on my search form, this what I did but it doesn't work.
Parameters:
Name: MMColParam
Type: Text
Value: Request.Form("Ref")
Default value: 1
Name: MMColParam
Type: Text
Value: Request.Form("New_resale")
Default value: 1
"Price" is a special one because this is a list menu with different amounts, like 50.000, 70.000, 90.000, and so one. The idea is to make this list menu post to the result page, only to display records under or equal to the given value. less or equal > than 50.000 or 70.000, etc.
I am starting to design a payment form that the user enters rent information and any payments/deductions. Should my fields in my table be set to decimal or double? Currently they are ALL set to Currency. I'm trying to add the fields but it don't seem to work. I know this one wont work: You cannot do math operation over string (Text property of textBox is just a string).
HTML
txtAmtOwedThisMonth.Text = txtTenantAmt.Text + txtHousingProgramAmt.Text + txtDeposit.Text + txtPetDeposit.Text
Tried this as well
txtAmtOwedThisMonth.Text = Double.Parse(txtTenantAmt.Text) + Double.Parse(txtHousingProgramAmt.Text) + Double.Parse(txtDeposit.Text) + Double.Parse(txtPetDeposit.Text)
I have several sqldatasources for my gridview. All of the columns are autogenerated. However they all have some consistent fields and I'd like to make those fields template fields so I can modify the edit template for them such as adding a drop down menu. Is this possible?
View 1 Repliesi am new to this as i am learning. i have been assigned this project with vb express 2010 with access 2007 database (.accdb) my database has a table named users which contains username, password & usertype fields. the usertype contains either "admin" or "limited user". now i want to design a login form that has username, password fields as well as a field for usertype (this field obviously would be readonly),
View 5 Replies