I'm unsure as to how to take two pieces of information from a table and display them into a textbox. The textbox should display the 'Balance' and the total money available for withdrawl (balance + overdraft limit). I believe I need to use the data bindings command e.g. TextBoxDetails.DataBinding.Add?
View 1 Repliesi have a form issue and return form. where Issuer_ID is the primary key, this form uses for boht emp and for student issuing book. at run time the user has to select a radio button for student or for employe. if he select student so after entering the full information when he press submit button so student query is execute and data stored in database, keeping the Employee field null, and when user select the employee radio button and after pressing the submit button, so employee querry executes and stores data in employee field, keep the student filed null. remmber and Student ID and Employee ID or foreign keys in isuee and return table and radiobuttons are not the part of database, its just on form.
now i want that when a user gives his issuer ID and at the lost focus event of issuer id, it is checked that if the record exists so the data is bind on the form, if does not exist so the user has to make entry, but if the data loads on form so how user will find out that this data is of student or of employee?
I have a DataGridView that is bound to a BindingSource. Below this are a group of textboxes that are associated with each column in the DGV. I tried to bind the textboxes to the BindingSource but realized their was no DataSource property for the textboxes. How can I bind them?
View 11 Repliesi need a hand on how do i set my initial value for textbox as blank. I tried to I load my textbox a data coming from my database but what my problem is that I need to set my default value for textbox as blank because everytime I load the forms the textbox will be filled immediately with data. This is how I bind my textbox and combobox after loading from database.[code]
View 1 RepliesI am making a booking system. I am using same form for insertion and updation. How can I update by taking the values from the textboxes. For example if the user enters value for just 2 out of 8 fields then How can i update just 2 fields without affecting the rest of the record. I mean to say that if I use a single update query using all the fields then if some textbox is left empty then it will replace the database field value by null or something else.
View 2 RepliesWhen the program is executed, the datagridview populate data and also the textboxes(example StockNumber,Description) and when i typed words in the search textbox ,the datagridview filters the matching words.When I clicked the item in the datagridview the textboxes does not changed it didnt show the information...
what the solution for my problem..i need to display the information in the textboxes when i clicked the item in the datagridview. Private Sub txtreg_delsrch_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtreg_delsrch.TextChanged
[Code]...
I am binding the data from combobox to textbox.In the Combobox Click event i coded as below for binding:[code]In the above code only the first value is showing in the textbox but when i select next value in the combobox the value is not changing..Is any loop i need put for binding? B`se i need when ever i change or select the value in the Combobox then the corresponding value should be change in the Textbox.
View 2 RepliesBinding Master Table to TextBox and DateTimePicker and Binding Details Tables to Datagridview then Add / Update / Delete in both
View 8 RepliesI have a typed dataset with 2 tables and a relation between the 2 tables. The relation is a 1 to 1 relation.First, who cane help me how to bind both the fields of the parent and the child table to a textbox.And second, in the dataset designer you cane preview the data. There a see for each record 1 row with all fields of the parent and also the fields of the child table. How cane i have the same result in a datagridview?
View 1 RepliesRe DataGridView Sorry don't really have any code - just a whole project. Basically I changed the underlying Access (accdb) Table by adding a new field, The new field shows up in the DataSources section of the Solution Explorer and in the "Edit DataSet with wizard" page but when I attach the binding source to a datagrid view, the new field is not there. I also created a new bindingsource but still not there.I just noticed I've another table where I changed the names to something more meaningful, and the old names are still there and the data for those fields doesn't display in the DataGridView
View 2 Replieshow to execute this SQL Statement
Scenario:
Given Tables T_Data, T_AllDesc, T_System1, T_System2
Given Fields:
T_Data= f_id, f_Desc, f_CreationDate, f_CreationTime, f_System1, f_System2
[Code].....
Is it possible to have a Textbox on a form that when the user inputs data, ( during Runtime )that data remains in the Textbox for good and the Textbox then becomes read only ? Is it also possible to make it so that the CD with the programme on, is in the PC when the programme is being used. Perhaps writing the Textbox data back onto the CD ?
View 1 RepliesI am trying to put the value in the textbox fields. I do have a working query for it.
here is my code:
[Code].....
What I am trying tot achieve is the following:User inputs data in one form that saves to the dataset table no problems. On an edit screen I want the current data saved to appear in this page within all the relevant fields but when saving I want this data to add to the dataset table as an additional line of data so the transaction records are kept.I want to add a new datarow regardless of it saving one change or all 7 changes that are possble.
e.g. Line 1 - user inputs 7 cells of data Line 2 - user amends 2 cells of data Line 3 - user amends 1 cell of data an so on. Unfortunately the terminology for certain items above may not be correct as I am still new to this programming and still on a massive learning curve.At the moment I do not have the code for what I am trying to achieve as I really dont know where to start with it.I am currently able to save the data and have it appear in the "edit" panel however only the cells changed are saved an it overwirtes the initial input.
[code]...
I�d like to pass data from my VB 2008 project to data fields set in Word. Can it be done and if so
View 10 RepliesFirst off, let me apologize for my wording. I'm a student programmer and code primarily in JAVA so my my lingo may be a little skewed.I have created a method to create text boxes in my program that all have the same properties (ie certain text, size, font, fore color, backcolor,etc.) that looks like this:
[Code]...
I have a combo box with a data source. This box shows one column of a table and allows me to select one item.Next, I have an ordinary text LABEL that I need to put text from another column of the item selected above.I tried to set the data binding field of the label, but this grabs only the first row or data and shows the selected column. That is nice, but I can not figure out how to update the selected selected ROW when the combo box item is changed.In this case the combo box lists a bunch of inventory parts. When I select a specific part, I need the change the text in a label to show the manufacturer. (like a sub-form). This same behavior will be used in several other places, but the relationships can cascade.
View 4 RepliesI'm quite new to VB.net (and VS 2008), so I'm afraid my question might be basic, but I'm not sure how to solve it.I have a winform with three textbox fields and a button. All textbox fields must be filled before the user can click the button to continue. To this end I would like to disable the button as long as there is at least one empty textbox.
If I had only one textbox field, it would be easy for me to do. In the Textbox1_Leave event I would check if Textbox1.Text is not empty and if so, set Button1.Enabled = True.But what should I do if I have three textboxes? Have three event handlers, one for each textbox? Or is there a way I'm not familiar with?
I'm facing a problem with my current member card reader development.
I'm reading the card number (just a serial number of 4 digits) with a card reader. this seems to work fine (even converting the text string to integers).
This number is then put in a query to find the exact record that corresponds with this number
Me.JSM_LedenTableAdapter.GetDataByKaartnummer(IntCardNr)
Have anyone developed a textbox where it is possible to display 2 fields in the textbox. We want to be able to show ID + description in the same textbox. (When user enter the textbox description may go away and the user can enter an ID)
View 2 Replieshow to use the VS 2010 IDE tools in a way the Microsofties didn't specifically intend. But since this is something I immediately tried without success.
I have defined a .NET 4.0 WPF Application project with a simple class that looks like this:
Public Class Class1
Public Property One As String = "OneString"
Public Property Two As String = "TwoString"
[Code]....
The expected result was that "OneString" would appear next to "One" and "TwoString" next to "Two" in the running window.
The question is: Why didn't this work? What will work instead? If I put bindings in a DataTemplate, it works. Blend, with its sample data stuff, implied that this should work, but it doesn't.
I am trying to create a basic webpage that will check a column of a database table to see if a "UPC Code" is taken already, to prevent duplicate use. I'm fairly new at .NET programming, but have built asp pages before. I'm just stumped :/
I have a textbox that a user can type in a number. The page successfully checks to see if the textbox is blank and reports the error, and if there is a value, it's supposed to bind that textbox number to a gridview to see which Item# it's associated with. But for some reason, my code is not binding the value of the textbox to the gridview.
Code:
<%@ Page Title="Home Page" Language="vb" MasterPageFile="~/Site.Master" AutoEventWireup="false"
CodeBehind="Default.aspx.vb" Inherits="UPC_Checker._Default" %>
<asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent">
</asp:Content>
[code]....
'Initialize an array
Dim myArray() As String = {"One", "Two", "Three"}
'as expected the text property of Textbox1 displays "One"
[code]....
How do I get Textbox1.text to display the new value in myArray(0)?
I have the following code where I'm trying to bind a datarow to a textbox.
Me.TierNameText.DataBindings.Add("Text", Me.m_TierRecord, "tier_name") Problem is, when the form is displayed no text is shown in the textbox.
This code runs before I call the form's ShowDialog method. I stepped through the code to make sure the datarow has data, and indeed it does.
I rarely use databinding but thought I'd try it this time.
I have been searching for an answer for this for almost a week now, and I can't seem to find a way to do this. I would think it is a relatively simple thing...
I have a ListView, and one GridViewColumn contains TextBox items. I want to put a Label right underneath the ListView, and fill it with the sum of the items in all the TextBoxes. Whenever someone changes a value in any of the TextBoxes, the sum should change, too.[code]...
have a TextBox with binding like below Items is table name and ItemName is field name i am using DataSet binding TextBox with ItemsBindingSource - ItemName i am type in textbox rose milk i want to store in propercase like Rose Milk how can i do?
View 1 RepliesI have a table on an sql server and am creating a form to manage the records in the table. On the form I have a combobox to navigate between records and am using this code to populate a dataset and the combobox...
[code]...
Also on the form I have various textboxes to edit the data for each record, and when the combobox selection changes, the data in the textboxes change. I know I can update the selected record when the contents of a textbox changes, but is there a way to bind the textboxes to the current record? What is the perfered best) method of handling this?
I am running Windows 7 and have an application that has a textbox bound to a Property in a Custom Class that Implements IEnumerable.When I call Raise Event to update the textbox it will only work the first time.However, the application works on every other OS I have tested on (XP, Vista). Also if my custom class does not implement IEnumerable it works correctly.Is this a bug? Am I doing something wrongform with a textbox and a button. The Textbox is bound to the Total Property in the class.
Public Class Form1
Private oDS As New DataSource
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
[code].....
i hve create combobox & text box and add database source to my project...i know how to binding data or load data to combobox using SELECT query..but can i change SELECT to INSERT query cz i wont when i type data into textbox,data will be in database...second..can i binding without add database to project..i mean mydatabase in debug folder..i hve problem binding data if database is not in myproject..
View 7 RepliesData binding should be an extremely simple thing to manage but I can't find a SIMPLE solution to the following problem.
I have two forms
Form1 contains a 4x4 MSFlexGrid (unfortunately an unmanaged COM object but I can merge cells, which I can't do with a managed Datagrid)
Form2 contains other controls which change the data in the Flexgrid.
I connect the two with a Public 4x4 array. Form2 changes the data in this array. I can update the grid data by reading the array. But how do I bind the Grid to the array so that it auto-updates - which is the whole point of binding isn't it?