I have a datagridview in vb.net form and i added 3 columns one checkbox and other are textbox columns.now i want to get or set values in this columns i used this code
If I have 10 textboxs whos design names are textbox1 through textbox10 and I want to refer to them programatically how do I do this? (calling to ToLower in this example) I normally google my question(s) but this is a hard one to google.
For i as Integer = 1 to 10 'textbox code here.ToLower Next
I am very new to programming so I apologize if I am asking really basic questions here, but how would I go about referring to a specific column in an array? I am trying to use the prices in one column of my array and multiply that by a quantity, but I am not sure how to extract the price out of the array.
I'd like to autosize listview columns to fit the column names. From what I saw this should do it but it doesn't work for me. Can someone see what I'm doing wrong or know of a way to do it? The listview is designed to dynamically build the coulmns based on the number of coumns in a recordset.
I am trying to figure out how to do this or if it is even possible. I believe it should be, I have about 20 different tables with different amounts of columns in each table. I.E. One table might only have 4 columns while another might have 30 columns. What I am trying to do is create 1 sub/funtion that will handle the select and import for all 20 different tables, unfortunately for me I can't seem to figure out how to write this.
I know the select statement for getting the column names is :
SELECT column_name FROM INFORMATION_SCHEMA.Columns where TABLE_NAME = 'table'
I have 2 datagridviews on different tabs of a tabcontrol.The user can input names into datagridview1 column1.I want these names to automatically appear in datagridview2 column1, in such a way that when rows in datagridview1 are added and removed the same rows are added and removed in datagridview2.I also want the column sort function to effect datagridview2.
I have a csv file and I import it to datagridview. Now I filter it using 2 datetimepickers. One for start and other for end.When click it must loop through the column names and must display only the columns which matches start date, range of columns between start and end date,enddate. please see the image attached.First image shows the datagridview when loaded from csv.second shows the desired output when filtered using datetimepickers.
I've been trying to use lookup tables to display names instead of ID's in a DataGridView using a DataGridComboBoxColumn and have even copied the example shown in the Forms over Data videos produced by Microsoft but still get the following error message:System. =Argument Exception:DataGridView ComboBoxCell value is not valid..Everything was done in the designer and the problem only occurs with the DataGridView; lookups work fine using a combo box when displaying single records.Also the error message only pops up when I close the form. Prior to that all the names are displayed correctly for each record, the drop down list shows the names correctly and I can edit, add and delete rows and save all my edits with no problems. Its just when I close the form that the problem occurs.Each time I press OK in the message box the names in the combo boxes are removed, one by one.
is there an easy way to make the size of a datagridview expand dynamically (like say it is not long enough to display all the data it will grow in width), or do i have to implement this functionality manually?
I'm using the follow code to grab values when a row is selected on my datagridview:
Me.DataGridView1.CurrentRow.Cells(0).Value
in this case for the first column. I am doing this for several columns. What I would like to do is switch to specifying the columns by name so the code won't have to be changed if columns are moved around. I have tried several things that didn't work. Can anyone supply me with the code to retrieve the value of a column on a selected row by the name of the column?
I have a simple DataGridView that I fill in with data from a SQL server source. The query is fairly simple and after the grid gets populated I manually add several new columns and then iterate through each row and fill in the columns with appropriate data. all that works well. but now when i click on a column header to arrange the data the data in the columns that were manually added disappears. is that suppose
2 of the columns have data added to them separately from 2 textboxes so I want to disable these 2 columns and also have it so that when I tab through the cells the cursor does not enter the disabled columns but goes directly to the next enabled column of the row
i have a datagridview (editable) dataset is bind with datagridview datagridview contains 20 columns and several raws but when i use dataset1.writeXML(location) it writes XML of only first 7 columns and all raws
I am workinng on an aopplication using the DataGridView.My intent is that the DataGridView is displayed with four columns, the user clicks on a row in any column and the complete record for the selected item is displayed and the DataGridViewis no longer in view.
The code to do this is in the event "dgvCollections_CellContentClick" and the function works exactly as I want it to.The problem is that when I want to sort by a specific column I click on the column header and not only does it sort , it calls the 'CellContentClick' event and the details form is displayed, which I do not want to happen.Is there a way around this problem other then using the "dgvCollections_CellContentDoubleClick" event to select the detail? This was what I did as I sterted this project and I found that the double click was very sensitive and often did not work. The single click is much better for the eventual user.
I have formated a column : "N2" but when it is : 1,2 or 1,3 or 2,3 .... then it OK BUT IF IT IS 0,1 OR 0,2 OR 0,.... THEN MY PROGRAM DETERMINE IT IS LETTER BEHIND ZERO , NAMELY THEY ARE 1 OR 2 OR 3.... I want it should be exactly 0,1 or 0,2...
I need to get the product of the 2 columns in the same row but my problem is the values of my datagridview come from database and the number for rows is not fixed.
(All of this is in a datagridview) i would like to know if it would be possible to say, take Columns 1 and Column 2 and multiply the value of each row and post it to a Column 3 with each row in Column 3 reflecting the multiplied values of the previous 2 columns..
I have a datagridview.I fill my datagridview using csv file. I need to filter it using 2 datetimepickers. The filter must display only the columns which are the start date, range of columns between start date and end date, end date. I give you the code and the screenshots that how my program result must look like. My code is not working here even after click the button1 it not filters. Please can any check this. sorry for bad english.Here are my csv file,code and images. My result must look like image2. here the tportera column must not be filtered. it must remain there.[code]...
I�m migrating a project from VB6 to VB.NET 2010 Express. Im replacing msflex grid with datagridview. But i�m not quite familiar with it. Im not using datasource. This will be done (far) latter.
So far i�m filling datagridview by code reading a recordset from mdb. Works fine.
The problem is that, I have defined the columns at visual studio designer mode, without using any code. When I open my mdi child form for the first time it works. But If I close this form and open it again a error occurs because it loses the defined columns.
how to preserve columns defined at design after close de form?
My MS-Access database contains 30 "table" files with identical formats (e.g. Composer, Arranger,Lyricist, etc.) and I use a common VB.NET form and DataGridView for displaying and editing any one of the 30 tables. When a user makes a menu choice, the menu program puts the file name and its first field into two global variables and then shows a form that contains an unbound DataGridView. This other form then loads a dataset from the appropriate database table and programatically binds the DataGridView to the DataSet. (I clear the dataset before filling it.)
All goes well and three DataGridView columns are displayed for the first time. However on subsequent operations, the DataGridView retains the columns that were previously generated along with their column headings (but no data) and I get six DataGridView columns. On the third operation I get nine DataGridView columns.
I have unsuccessfully tried to obtain a count of the number of DataGridView columns so that I can remove them from the DataGridView but it always gives me a column count of zero.How can I accomplish the simple task of removing all columns from the DataGridView?
I have a datagridview and few testbox. User types in the details into the text box and when pressed enter it adds to the datagridview. Now the question is user will be allowed to save the rows into a text file but it in not saving in a proper format ie i am getting as:
Quantity Name Rate -------------------- 12 wers 30 2323 ertd 40
I want to sort the data in my DataGridView by the Title, Location and Reference, i have the following to sort the DGV by title, how can i include the two other columns in the sort?[code]...
Is it possible to sort a datagridview by column when a user clicks a column header? I have the sort method set to automatic under each column, which from what I read, is what I need. I know this has to be insanely easy....
I built a datagridview bound to a table and added a check box column. I would like users to check a box on the rows that will be used as parameters in a stored procedure. I tried to run this to determine what boxes are checked but received an error "Conversion from string "" to type 'Boolean' is not valid." the column name for the checkbox column is called selected[code]...
