Serial Port - String To Hex
Nov 14, 2011I m writing serial port program i can send hex data without any problem but i stuck when I get response in buffer for example response is a string "?-??"
[Code]...
I m writing serial port program i can send hex data without any problem but i stuck when I get response in buffer for example response is a string "?-??"
[Code]...
I got an app, which receives data via a R232 port, convert it to a string and on the other side I got a database, where the strings are saved. How can I find a way to compare the string with all strings in one database column and get back the another stringform the same row in this database. I never programmed a database
View 1 Repliesi am a absolute beginner and i want to use vb to receive data from micro controller through serial port using rs232 standards, i found this code to receive the data serially, can any one tell me where should i paste this code, so that the data received will be displayed in message box.Private Sub DataReceived(ByVal sender As System.Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) HandlesSerialPort1.DataReceived
[Code]...
The link below has code to connect to a modem thru the serial port but it is for an earlier version of VB. when I convert the code, it does not fully convert and has 4 errors that prevent building the project. can someone tell me what needs to be changed or added?
[URL]
Note: the error: not CLS-Compliant
For starters I'm using VB 2008 express edition.I have code that writes a string out of a serial port.My issue is that the machine sends data back and I don't know how to catch it.This is my latest attempt at creating an array of characters to create a string later but doesn't work.[code]
View 2 RepliesI do not have much experience with VB.What I need to do is to read a serialport as a hexadecimal string.I've done this with the MSCommlib, but now want to convert to system.io.ports.The equipment wich is connected to the serialport is a RFID card-reader, so the application haft to detect when it is receveing data, and then continue on.[code]
View 5 RepliesI am trying to send a control string from VB.NET to a serial port. I am using a pololu trex jr. on the receiving end of the serial port. I have attached a copy of my current code which compiles without errors, but fails to send data. I can tell that it is not sending data because I have a light on the control board connected to the port and it normally blinks when data is received. The program that came with the board drives it perfectly but does not serve the purpose I need it to. I am open to any suggestions as I eventually plan to write a class to contain the control routines.
View 12 Repliesi knew Serial ports are a type of computer interface that complies with the RS-232 standard. They are 9-pin connectors that relay information, incoming or outgoing, one byte at a time. Each byte is broken up into a series of eight bits, hence the term serial port.And I want to write a program chatting through Serial Port.
View 3 Repliesim very new to visual basic. as in i just started 2 days ago. Currently i have a little program written up that has a couple of radio buttons and then a submit button. when you select a radio button and click the submit button, a little message box with pop up and say "you selected such and such"
Well now im trying to make something that will send a string to arduino through the usb cable. Basically it will use the same set up as stated above but instead of a pop up message it will just send the string through the port. for example Radiobutton1 - when selected and submit button pressed will send "1" (no quotes) through the serial port Radiobutton2 - when select and submitted will send "1" and then maybe "3"
and so on and so. Some radio buttons will only send 1 string through them and some may send multiple. Now, i dont need help with arduino, i have that already set up to wait for the strings to come through the com port. just need to figure out how to do it in VB.
I have an application in Electronics to communicate with serial port. With using VB I have succesfully read a character using
Serialport1.ReadByte
or
Serialport1.ReadChar
[code].....
I'm trying to read a string(what's going on) from my Arduino and display it in either a label or text box. but its not wanting to display the characters, or string i want it to. So I could really Here's the code I have right now:
Imports System.IO
Imports System.IO.Ports
Imports System.Threading
[code].....
I'm new to VB, I'm now want to know how to convert received string to double. I'm receiving string like this 420.8 280.9 140.2 from serial port.. and transferred it into textbox.. I'm using following code to split string and to convert to double
[Code]...
I've inherited a tested function that processes incoming data from a .NET Serial Port. (Dim RXBuffer as string = serialport1.ReadExisting) I've written a different part of the application that processes a byte array as received from an asynchronous .NET socket.
Is there a way I can convert the byte array into a string as if it arrived from the serial port?
I would prefer to rewrite a very long 'if statement' into byte array functions syntax that look like:
dim b as boolean = IsBitSet(state_buffer(i), j) 'rather than:
dim b as boolean = (Asc(Mid(RXPacket.Pdu, CInt((i - (i Mod 8)) / 8) + 1, 1)) And CInt(2 ^ (i Mod 8))) > 0
I have a stand alone VB.Net 2005 application that uses a serial port that generally stays open while the application runs on a Windows XP system. In trying to bullet-proof the UI, I ran into a problem when the USB to Serial Converter normally used to provide the serial port is disconnected while the serial port is open. In trying to handle the resulting error when accessing the port, I find I cannot close the port.
When trying to do so, the error message says something like "unable to close the port. You may not have sufficient permissions." Reconnecting the USB/Serial Converter does not reactivate the port.
[Code]...
I'm mohammed from Oman ,I'm visual studio.net programmer How I can Read the Data From Barcode Weight scales By Serial port and TcpIp port
View 7 RepliesI have a Windows form.in windows form have a combo box that give me a list of available port serial with it code (Dim ports As String() =SerialPort.GetPortNames())for example( Com1,Com8,Com15,...).but I want to give me fullname of serial port in device manager for example in dvice manager is these (Comunication Port(COM1) - Printer Port(LPT1) And USB Serial Port(COM8)).how to Get it?
View 2 RepliesIf I uninstall the COM1 and reboot, it works. If I shut down (power off) and restart, I get the message below. If I uninstall then click on Scan for Hardware Changes,The given port name does not start with COM/com or does not resolve to a valid serial port. Parameter name:portName
View 8 RepliesI have to send the user-input data to the serial port. From the serial port the Modbus controller reads the data in Modbus/RTU mode.Now consider the following:Private WithEvents sp as serialport Now when I send sp.Write "192" to the serial port, I was that the complete data go as one data packet. Instead what I find that when this data is sent to a hardware controller, I find that the serial port first transmits 1, then 9 and then 2. Because of this my modbus does not recognize this data and throws and error. I tried sending "12" and again i find that it goes as "1" and then "2". Is there any way to send the data as one data packet so that my modbus can read "192" as one data packet value and not as 3 data packets of 1, 9, and 2?
View 3 RepliesIm having problem with the Serial Port. When i run my program, "Access to the port 'COM1' is denied". What does that mean? Im not sure whats happening because theres no error in my code. Someone suggest me to use 'COM2'. Which is also the same result. I have a microcontroller, programmed and run it. And i need to capture the data onto my vb, which is on a multiline textbox. How to i do that?Just to double check my code?
[code]...
I am trying to buld a DLL in VB.NET 2010 that will be use to control a vending machine.Whin a call into the DLL to a function to open and setup the comport the first time its opens it just fine, but if a call into the DLL again it does not know that the port is open even if it is still open. I can check with another program and is shows the port is open and if I try to call into the DLL again to open the port I get an error that the port is already open. Any idea how to set this up so it will work
View 7 Repliesi'm creating a windows form to send/receive data to/from serial port.At first : i send the data as string to the serial port .Second: i tried to read the string again for test the successfull transmission , but i recieved empty string
[Code]...
I can find documentation (preferably with code samples) that will guide me through all the steps to activate and read from a serial port?
View 6 RepliesFor my application a need to set a breakstate on/off of 25ms.In Xp this runs fine when I set breakstate=true and wait for 25ms and then breakstate= false and wait 25ms.In CE6.0 when I set breakstate = true, it only throws a puls.It is even not possible to keep breakstate on.
how to solve this or is there an alternative to simulate a breakstate?
can we communicate to Serial port COM1 through Microsoft Robotic Studio?We are developing wireless robot which will take data from serial por
View 14 RepliesFor many years, I have sent data between 2 computers using serial ports."Here is the data", "Thank you for that data!" type stuff.Where do I get more information for doing the same thing with 2 computers that are networked together? Assume a local ethernet connection.I have experimented with serial-ethernet modems and that works well but I don't want any more hardware.Is there a good thread here I should read?I want 2 VB programs running and I want to exchange data periodically.
View 2 RepliesI know things have changed in VB2005.net and i have Express and i want to controll the serial port. I have a program from VB6 that i understand and i tried to convert it but i get alot of errors and i have know idead what they mean. As you can tell i haven't been programming very long.
If someone can point me in the right direction for programming the serial port in VB2005 .net i would appreciate it or tell me what differences there may be.
I am developing a UI for an embedded device that I have designed and built. The device uses an FT232 chip which, when connected via USB is automatically assigned one of the COM ports. I was wondering if there is a way to set up a loop which would automatically detect which COM port the device has been assigned. I could then add some handshaking to verify that the port is correct.
View 4 RepliesI have a little code for get the serial port available in the system.
For Each pn As String In IO.Ports.SerialPort.GetPortNames
Debug.WriteLine("NAME : " + pn.ToString)
Next
[Code]....
So, The PORT1 and PORT5 its ok (because this are real serial port, with a real RS232 interface), but PORT4, I don't know.
How I can do for get only true serial ports ?
I am facing problem reading data from Serial port. Actually I am connecting with the hardware device called Crimp Force Analyzer. It gives the data on hyperterminal and I have to read that data from my <acronym title="Visual Basic">vb</acronym>.net program. The data is somewhat like this:
[Code]....
I'm looking for a program that would read and import data from my serial port and then graph it. I don't mind buying it if it's not a free program.
View 6 Replies