Source Code That Uses Microsoft Office Task Panes And To Work?
May 23, 2009
I'm trying to compile some source code that uses microsoft office task panes and to work with some speech recognition.Code is from the following article
Enabling Speech Recognition in Microsoft Word 2007 with Visual Studio 2008 -
So I'm guessing it has something to do with the fact that I don't have office loaded on my computer. Now I have another laptop, with office that I loaded this project on, and it works fine. So do I have to load office on this computer, or can I just reference something?
I am creating simple mail without any atach using Microsoft.Office.Interop.Outlook. Mail is successfully created and opened, but after this button 'Attach File' does not work (it could be clicked, file could be selected but it is not attached). Here is simple code:
Is it possible to see how notepad works in visual basic? Like see all the events and all. My friend said it's possible to open programs in notepad; but I've googled it and I can't seem to find anything.
I want to see the source code of Microsoft.Visualbasic.Financial.IRR how would i break it and how would i seee the sorce code of IRR method of financial class?System{" df -k | awk '{sum += $4 }i; END {print sum} '"};
above line is not useful I've tried to view it using different software but it will not work for me is there any software that will view it source code.
I have been looking for a good Example of Code to Compare 2 worksheets in the Same work book I have not had much luck. The Goal when complete is to compare Sheet 1 to Sheet 2 Then the Difference Recorded on Sheet 3 as a complete row with a date Stamp in A . If it is just a change then it is color coated Orange. If total new entry that was not on the sheet then it would be green If a Row is deleted in would be Pink.
I would like to create Shared add-in that works with Word, Excel, Outlook and Power Point. I've found nice article that provides step by step instruction for creating shared add-in for Word: [URL] I've followed instructions and it worked. However, I am looking for a way to create one add-in that works with Word, Excel, Outlook and Power Point, not only Word. I didn't find any reference on the WEB.
Basically I've coded an Excel 2007 project in VB.NET 2010 that allows you to create charts with a fair amount of interactivity. I want the user to be able to save and reopen this workbook and still have that interactivity in any already-created charts, so they don't have to re-create them.
When I create the charts, I use Sheet1.Controls.AddChart(...), which returns a Microsoft.Office.Tools.Excel.Chart with which I can handle events and such. However, when I reopen the file and look through the Sheet1.Controls collection, there are no Chart objects. Accessing the charts through Sheet1.ChartObjects.Chart gives me Interop Charts, when I need the Tools Charts.
im using Visual Basic 6 to automate a large amount of excel and word content into a single word document and am having to use selection.copy and selection.paste on a regular basis. this continually adds items into the office clipboard and fills it up rather rapidly making a huge drain on resources until word eventually gives up and crashes.i have a couple of things that i would like to do to that i think would prevent this from happening....
1-clear the task pane clipboard
2-switch the task pane clipboard off before my code starts automation
i've tried a couple of options to clear the clipboard but they only seem to clear the system clipboard and not the task pane one (containing its 24 resource hungry and useless items)[code]i can manually choose 'Stop Collecting' from the system tray icon menu, which appears to do what is says but i need to automate this function in someway.i find it hard to believe that microsoft would introduce a feature without giving even the most basic of access to programmers.
I want my form to navaigate into a link then open up the source code of that page it navigated to . Then get a link from the source code then display it on a textbox .Here's an example : i want this link in a source code :
How can i make my form to navigate into the source code and get the link beside config word . I know it is possible to do it , just don't know the function to do it .
i'm relatively new to outlook task creation from visual basic.when i create an outlook task, i want to insert a link with a custom string..url...instead of the left screen, i would like to come up with the right screen.by the way, i'm using visual studio 2005, microsoft outlook 2003 and outlook interop from outlook 2003.[code]
I am trying to use .Net to load reports into SSRS. When I looked up example code they used the Warning class which, after futher research, seems to be in the Microsoft.Build.Task namespace. My problemis that this library doesn't show up when I try to reference it and when I try to add references it doesn't Microsoft.Build doesn't show in the list of .Net references. What am I doing wrong? The compiler does not recognize the class in the following: Warning[] warnings = Null;
I am using Parallel.ForEach to do some time consuming operation. Coming to the question ,
For example,
I am enumerating a collection called 'TestCollection' which has 3 items.
Parallel.ForEach(TestCollection, po, AddressOf DoSomeThing) So 3 tasks will be running in paralell at a time Now I want to add another 2 items to TestCollection, while the task is running.
How to enque the additional 2 items to the 'TestCollection' so that additional two tasks will also run in paralell. Finally 5 tasks should run in paralell without stopping the running task. If a post answers your question,
I've had a program using Office Web Components operational for about 5 years. I just installed Windows updates to the Vista 64 operating system, and now under Visual Studio express edition with Visual Basic, I am getting over a hundred error messages related to the following:
'Office' is not a member of 'Microsoft'
So, for example, the program has references like Microsoft.Office.Interop.Owc11.ChCharts and I now get an error message
[Code]....
how to fix it so these error messages disappear? (Where did Office go, and does it still contain Interop.Owc11, wherever it is?)
I have a VB.NET Windows application which uses Excel and Outlook, as I Know I have to reference either Microsoft Office 12.0 or 11.0 according to the office used (2003 or 2007). is there a way so that my project works on both and how can i do this?
I have been using Excel in vb.net for years and no problem but I have a new app and nothing is working. First I can't get Microsoft.office.interop referenced anywhere, which was weird. Then I can't instantiate Excel App.. Dim pExcel_App as New Excel.Application -- this gives me error "New cannot be used on an interface??But I can do this..Dim pExcel_App As New Excel._ExcelApplication -- where did this come from?Then I can't put anything into cells Dim wkbSheet As Excel.Worksheet wkbSheet.Cells(1,1) = "Title" --- this give me an error "Expression is a value and therefore cannot be the target of an assignment"
THe really weird thing is that I have an old app open at the same time that is just fine with all this code. AND the intellisense is different for each cell.The good one sets is as a range, the bad one says it is an object???I re-installed the MS PIA's but this didn't help.
I have referenced the Microsoft Office 11.0 Object Library and am using it to "run" my custom spell check dialog, meaning I am populating and looping through the spelling errors, instead of showing the standard Word dialog. I am trying to figure out how to "ignore" a word or "ignore all" words from appearing as a misspelled word again. Shouldn't there be a ignoredwordlist or something?
have a Visual Basic 2008 project with references to Microsoft.Office.Interop.Excel and Microsoft.Office.Interop.Access for Office 12/Office 2007. I also have Office 2007 installed on my PC. I tried running my program on a PC which has Office 2003installed (i installed the compatibility pack to open .xlsx files) and the Access Database Engine for .accdb Databases.It does not have VS2008 installed but has .Net Framework 3.5 SP1 installed.
I have create Office Excel application in my machine(XP). and i have placed the application in windows server 2008 giving the following error.
Microsoft Office Excel cannot access the file 'serverInput.xls'. There are several possible reasons:
The file name or path does not exist.The file is being used by another program.The workbook you are trying to save has the same name as a currently open workbook.
both client and server systems installed office 2007 and added reference microsoftexcellibrary 12.0
created assembly for the application and calling the code from the form.
I was bored and started to build a launcher for MS office. It has 5 buttons and each button launches a program, then my launcher closes.Each button has this
This works fine, but Word loads so fast that by the time the program has closed, word is in the background and i have to click on the taskbar to get it up. This kind of defeats the object of it. I'm trying to be lazy here!!Also, each button has an image on, but i want you to be able to press a key for each button. Is that possible? Ultimately Laziness?
It is my first time to code vb2010 with an application of database. I am doing my inventory system project and i do not know how to start my project. Can somebody help me to find a tutorial in visual basic 2010 and New Microsoft Office Access 2007 Database? I would like to use vb2010 and New Microsoft Office Access 2007 Database... Is this possible to use for my project?
i'm using a microsoft access 2007. i've designed a report and i add a print button inside the report. when i click on the button, the report will queue in the microsoft office onenote. how can i make it to print out directly without queue in the onenote?
I have a very simple program that can run and work perfectly.The only trouble I have is when I install it.I double click the setup file that it created and a window is displayed with 2 buttons 'install' and don't 'install'.What I want it to do is run an installation wizard like when you install an offical program like 'Microsoft Office'.Is there any way to do this in 'Visual Basic 2008 Express Edition' if any other 'free' program is required then I would also be happy to use one.Here is a list of a few extra things I would like to do but I'm mainly posting to find out how to make the installation:
> A Desktop Icon is created
> When it is displayed in the all programs it is called 'Email Validator' not 'xxxx' as it is at the moment
> There will be an uninstall button (So the user doesn't have to go into Control Panel > Add or Remove Programs
I am working on a legacy VB.NET application that uses Microsoft.Office.Interop.Word, with Office 2003 installed on the server. When I publish my site, even though my config file clearly shows v11: The site will crash saying v12 couldn't be found: Could not load file or assembly 'Microsoft.Office.Interop.Word, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Note: I currently have Office 2003 & 2007 installed on my dev machine, also, when looking @ references I am given the option of selecting v11 or v12 (so v11 is def. there). Within a page on the site the page does an import statement for Microsoft.Office.Interop.Word. Is it possible to specify the version at this point, or any way to force it to use v11 without me uninstalling my v12?
I have developed visual basic 2005 windows application on windows XP with Office 2003.I am using Microsoft Office Spreadsheet Component. I am using Axinterop.Owc11.dll.If i deploy my application on windows 7 with office 2007, My application gives error at loading point of that component.
so when i run my application it gives me error "unhandled exception has occured in your application. if you click..Attempetd to read or write protected memory. this is often an indication that other memory is corrupt."so i copied my sourcecode on that machine and debug. When i run my application in debug mode it won't give me error but if i run my application without debugging it gives me above error.
I found that it give me error in InitializeComponent() Me.xls1 = New AxMicrosoft.Office.Interop.Owc11.AxSpreadsheet CType(Me.xls1, System.ComponentModel.ISupportInitialize).BeginInit() Me.xls1.DataSource = Nothing Me.xls1.Enabled = True
[Code]...
Any idea how to resolve this error. axinterop.owc11.dll and interop.owc11.dll are in application folder.