So I want to test one of my Functions in my Web Project, but it's not actually connected to anything in the project yet (someone else is working on that part). The Function takes in an "ID" field, goes off and does some queries and gets some data, performs some calculations on it, and then writes a bunch of lines to a FileStream and returns that stream. I pretty much just want to test it by having it write the file to my own computer locally, and working with that file directory after the Function completes.
So my question is mainly:
1) How do I call this Function just for testing purposes so I can test all the queries/calculations/File writes, etc without it being connected to another part of the application just yet.
2) How can I change the 'Return fs' for the FileStream to write to my own computer locally to view the file that has been written.
I am trying to make a little app that will tell me if my servers are online or offline, currently I am using my LAN to test my servers when this app is working then I will be adding IP Address from other hosts that are not on my LAN First of all I have got this working fine if I use a button for every server test but I don't really want that I want them all working from one click
I using unit testing, to ensure that I can read connect string information from the ConnectStrings section of my app.config file. This works fine in the application proper, However when I attempt to generate a unit test for this under the Test Project, the dll.config file is being ignored, and the connectstring info from the machine.config file is being retrieved instead. How do I ensure that my tests read from the correct config file?
As I develop code, I often want to unit test some of the building blocks of a class even if they are normally private. If my unit tests are inside the project, I can use "Friend" to accomplish this and still keep the functions private for normal use. But I would rather move my NUnit tests into their own separate project(s). How do I achieve the effe vb.net 2005?
As I develop code, I often want to unit test some of the building blocks of a class even if they are normally private. If my unit tests are inside the project, I can use "Friend" to accomplish this and still keep the functions private for normal use. But I would rather move my NUnit tests into their own separate project(s).
I have some questions about mysql database; I have set up columns and rows on mysql database and I would like to make mysql connection for a test before I would release the project in the near future, but my doubts is that how would I be able to keep mysql admin username and password details secure in the project without anyone could find out??Secondly, I don't want anyone to crack my project to get the details, which it will put me and other clients at risks.
I have an ASP.NET MVC project that works fine on my local machine (no build errors, server errors or anything). However, when I publish the project to a test server, I get an "Object reference not set to an instance of an object" error on a For Each I have in my view.
Is there any way to detect if the DNS server is not responding for sure. That is because if I ping the server while my torrent downloads are in progress, I get a "Request timed out".
I have a small desktop Twitter client written in VB.NET (2.0). Works great. Some of my users have emailed me and said that the application isn't working for them because they are trying to use it on networks where a proxy server is part of the network connectivity equation.
if I could make a tcp server and client so he can restart a game server from a LAN connection. The game server is a test server for online playing games it allows users to test there created maps but after so many errors the program is told to close out the running server cause of errors. The problems are fixed just by restarting the server. I have the client working as far as i know (cant do a full test without a server). During the creation of the TCP client built within the server (to receive commands and send reply) ive used
I have been trying to get a test 'developer use' authenticode certificate working on our server. We dont really want to pay for one until we have tested internally so we are using a test cert generated by tech-pro. So far i have:
- Installed certificate services sucessfully.
- Created a test certificate using tech-pro codesign.
- used signtool.exe wizard to sign the application.
- imported the test certifcate as a server root certificate.
All appears to have gone ok and without error but when i run the exe on a virtual VISTA machine logged onto the domain the program still prompts for the administrator to logon to elevate its priviliges. Is there another step im missing that requires me to specifically register the certificate directly on the virtual machine too? Or something else i need to do on the server to make that certificate valid for our domain?
I need a simple snippet that will allow the user to test the connection for the FTP server entered in a textbox and the username and password from 2 other textboxes. (Server = TextBox1.Text, U/N TextBox2.Text, PW TextBox3.Text) I forgot to note something obvious - there's a "Test FTP" button
I have a .Net 2 solution with some asp classic pages.I get a specified cast is not valid error when I access the page on my local. Below is the vb function where I get the Error:
Public Function Retrieve(ByVal vntSeqId As String, ByRef vntPart As String, ByRef vntPartKey As String, ByRef vntEntDate As String _ , ByRef vntStatus As String, ByRef vntOrigGblId As String, ByRef vntOrigNetId As String,
MVC3, VB.NET, using EF. I am working on coding up a simple function to handle checking for a valid MySQL connection. If the connection fails the test it will use the secondary server connection. This is required because our hosting provider does not provide failover or redundant MySQL servers. The problem is I tried to use a simple try catch method in the HomeController. This fails early because the Entity Framework is looking the connection that was set up when I set it up... Is there anyway to control that connection dynamically?
I am trying to test a number of stored procedures through SQL Server Query Analyzer. But am stuck when I try to test stored procedures that contain Output parameters.
I'm basically trying to do a small report card project. I only need to pull 5 Students with each student having 5 Test Scores a piece. The full Code of what I have for the submit button is below. I have actually 3 questions.
1. I always seem to have trouble with them unless I initialize them when I dim them. Is there a better way than below
2. The below code works really well for Student 1 and all 5 test scores. Rather than do that code 5 times though, what is the best way for me to basically state that IF dblStudent1(intMax) = 4 Then Change dblStudent1(intMax) to dblStudent2(intMax) etc.
3. Would this be better suited towards a multidimensional array ?
Private Sub btnEnterGrades_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnEnterGrades.Click
Dim strStudentNames() As String = {" ", " ", " ", " ", " "} ' Holds the 5 Students Names Dim intMax As Integer = (4) ' Place Holder for Student Number
We have a WCF service hosted in IIS that currently calls a VB6 DLL to do part of its job. This works fine, but we can't deploy the service to a 64-bit target environment without configuring IIS to run it in a 32-bit worker process.I am currently investigating ways around that restriction. Porting the VB6 DLL to .NET is not possible for various reasons, so I created an ActiveX EXE wrapper around the DLL in VB6, so that the service can run in 64-bit and the VB6 parts in 32-bit.
When I tested the service I got this error:
Type: System.UnauthorizedAccessException Message: Retrieving the COM class factory for component with CLSID {9AE7303B-D159-43F6-B1A5-52D297581820} failed due to the following error: 80070005.
After some Googling I found that this is due to either:
Calling an MS Office component DCOM permissions not being configured NTFS file permissions not allowing read/exec access to the IIS worker process identity (ASPNET in my environment)
Of these:
Definitely not applicable Also not applicable; I am not hosting the EXE in DCOM or COM+, just a simple COM out-of-process activation This looks likely; however, I checked the permissions, and NTFS reports that the Users group (which ASPNET is a member of) does indeed have read/exec access to the file I tried calling the EXE from a unit test fixture, which is executed in my admin-level account rather than the IIS worker process account, and it worked fine, so the error is definitely something to do with permissions. I'm not sure what to do next.
UPDATE:The IIS virtual directory is configured for Anonymous+Windows access; the WCF service uses only Anonymous authentication, the Windows authentication is for the VS debugger. Task Manager reports that the aspnet_wp.exe process is definitely running in the ASPNET account.I explicitly granted Read and Execute access to the ASPNET and IUSR_<machine> accounts on all the COM exes and dlls involved. This made no difference.
I explicitly granted Local Launch and Local Activation access to the ASPNET and IUSR_<machine> accounts on the relevant interfaces in the DCOM configuration. This made no difference either.Keep trying to get this working somehow.Go the whole hog and host the EXE in COM+.Give up. Tell users that the WCF service must be configured to run in a 32-bit app pool on 64-bit Windows.
I am new to working with SQL databases (and databases in general) so I do not have a lot of experience with how queries work and how I can practice them. When I was first learning xml and XPath, I found XPath Visualizer incredibly helpful after someone on stack overflow mentioned it to me.Due to this, I am wondering if a similar tool exists for SQL databases?Basically a tool that will allow me to connect to a database,enter queries and see somehow what the results would be like.
I have looked online a bit, however I have found relatively few options in terms of any utility that would do what I want, and that looks reliable.I will ultimately be writing an application to interact with an SQL 2008 server in vb.net, however for now I am just experimenting so I will know what I am doing when I actually want to create my application.So far I have managed to connect to the database using an OLE DB connection, but I am now looking for a way to experiement with queries without just querying and figuring out a way to interpret the results in my program. Basically I want to be able to remove the programming aspect of things so I can experiment with queries without needing to question anything in my code that is unrelated to the specific query.
I'm wanting to add two forms to my project that will allow me 1) Pull all the current MS Updates installed and list them in a nice looking grid, 2) Pull a list of all the available updates for the machine. I would love for this to work on XP/Vista/7.
As per [URL] How can I achieve this? 'processPacketVB' is a 'variable' but is used like a 'method' is the error I'm getting with these references to the project and class and function.
using VBProcessPacket; namespace UIST { public partial class FormActionMenu : Form { private void timerDelay_Tick(object sender, EventArgs e) { VBProcessPacket.ProcessRX processPacketVB = new VBProcessPacket.ProcessRX(); //read the receive buffer as a string RXpacket = processPacketVB("test"); // processPacketVB throws the error 'processPacketVB' is a 'variable' but is used like a 'method'
I would like to make a snippet for a try catch block. In the catch block I will have a call to a senderroremail function.Is it possible to have the snippet automatically grab the function where the try catch is and the project? Like have it end up somewhat like this
Try 'code Catch ex as Exception senderroremail("projectname@domain.com", "an error occured in functionname in projectname", "webmasters@domain.com", ex.message) End Try
I am creating a dll to use with all my projects and have run into a problem. functions work fine and i have no problems using the dll with a project but i am trying to add xml documentation to the functions in the dll so that i have information when i call it, i can see the summary if i call the function from within the dll project but not if i call it from a seperate project.
I need a simple embedded database for a relatively small database size (< 100MB, but in most cases < 20MB) and maximum 1-2 concurrent users/connections on average. It must be able to protect/encrypt it's data with a login.
i was create the .exe of vb.net project with sql server in backend. when i install it any other computer that time it is not connect to the data base. whta i do for that.
