I am working on a site where I use the Split function on a string. To make sure I used a separator character that I do not use anywhere in the data I selected the character'£'. This worked fine in Firefox and Safari, but in IE8 I get an 'Index out of range' error, so apparently the '£' character is not handled correctly.
View 5 RepliesUsing VB.NET - I have a string:
"##RES00012##Some value ##RES00034##Another value"
That I want to split using the "##RES" as a seperator to:
"##RES00012## Some value " and "##RES00034## Another value"
The string.split function doesn't seem to offer an overload to split on multiple characters or array of characters and maintain the seperator, which is required for functional purposes.
I'm looking at simply searching for indexOf("##res") and using string manipulation to do this unless I'm missing something obvious? I've searched SO for a solution but unable to find anything that actually does what I'm after.
The following is the closest i've found: how-do-i-split-a-string-by-a-multi-character-delimiter-in-c
I have a string variable with value "abcdefghijklmnop".now I want to split the string into string array with say 3 characters(last array element may contain less) in each array element from the right end.
[Code]...
I have a program where a user enters a list of numbers in the form of a string. This list of numbers is always a multiple of 8.So the list can contain 8, 16, 32, 40, 48, etc. numbers.
I need to split that string into every 8 characters.For example, say the user entered "1234123445674567"
How can I split it into a string array where (0) is "12341234" and (1) is "45674567"
Note: The size of the array has to be equal to the length of the string divided by 8.
Like this:
Dim stringArray(txtInput.Text.Length/8) as String Edit: I know I could do this by making a loop that counts 8 numbers and splits it into an array but that would be lengthy and take a few variables and I know there's a more efficient way to do it. I just don't know the syntax.
i need to comfine 3 string after i need to split it my problem is the 3rd string inside contains ,(Comma) so how to seperate by comma
View 16 RepliesMVC 3. Vb.net. Part of my app generates PDF files using Itextsharp. Some strings are too long to go onto the background image correctly. So I basically need to split this string when its over 26 characters long and when it splits it cant split in the middle of a word. from there I will use newline to add the string to the right to the next line... I did start bulding the function that I will pass the string into test for length and then pass back the string after it finishes.
Private Function stringLength(ByVal _string As String) As String
If _string.Length < 26 Then
_string.Split(
End If
End Function
I have had a look at 2010 to see if any options have been added to
System.StringSplitOptions
and we still have;
None
or
RemoveEmptyEntries
Anyway after answering another STRING related question here.>>
[URL]
I thought about how the String.Split method works.
Often I have wanted to split a string on the characters that terminate a sentence such as a full stop >> . << ,
a question mark >> ? << or an exclamation mark >> ! << and still keep the string split characters.
[Code]....
Basically, for each character in a charArray created from the string to split, if the character is a letter, digit, or hyphen, I append it to a temporary string. When I see a split character or the last character, and the temporary string has value, I add it to the collection to return.
For i As Integer = 0 To (charArrayLength - 1)
charToInspect = CChar(charArray.GetValue(i))
If IsLetterOrDigit(charToInspect) Or charToInspect = hyphen Then
[Code].....
How can I check for characters not allowed for file creation programmatically? you know like the / <> and so.
View 3 RepliesI am investigating an issue with regards to a textbox rejecting user input. In this case the error message is: 'The note was found to contain a possible credit card PAN.'Now obviously this is a custom validator but I am enable to find where it tells me what characters ARE allowed? In debug I entered a note containing no numbers and when the validators are initialized, these variables have the value below:
valNoteContainsPAN.Expression = Me.PANRegEx value = (d*)45367{13,15}(?!d)
I'm assuming this is blocking numbers of certain lengths? How can I find out how to actually read and understand the above? Google is proving fruitless
I'm trying to filter the results of a xml file. One of the fields I've been requested to filter is the attribute price of each node. The problem is the xml is from a spanish source and the prices are with decimal separator being , instead of . and thousands separator is , instead of .I'm trying to get an xml file filtered where only nodes withprices lower than one supplied appear.
The xml structure is:
<RoomStays>
<RoomStay InfoSource="" Price="201,60" Discount="0" MealPlan="Sólo alojamiento" MealPlanId="1" Provider="Marsol" ProviderId="3" HotelName="HOTEL LA ESTACION" Rating="" Latitud="" Longitud="">
[code]....
I've tried to filter using XPath and Linq2Xml. I've come to the conclussion I have to replace , with . and . with , but I get 0 results.With values below 1000 where there is only , I've got it using:
doc.XPathSelectElements(./RoomStays/RoomStay[translate(@Price,',','.')<=256.78])
But when there are prices above 1000 with thousands separator . it doesn't work, so I tried:
doc.XPathSelectElements(./RoomStays/RoomStay[translate(translate(@Price,'.',''),',','.')<=256.78])
But it returns 0 results (I tried to use replace function instead of translate to remove the . characters but I get an exception).
I am trying to split a long string based on an array of words. For Example:Words: trying, long, array Sentence: "I am trying to split a long string based on an array of words."Resulting string array:Multiple instances of the same word is likely, so having two instances of trying cause a split, or of array, will probably happen.
View 5 RepliesI have a string of characters, but I would like to have a string of hexdecimal characters where the hexadecimal characters are converted by turning the original characters into integers and then those integers into hexadecimal characters. How do I do that?
View 3 RepliesIs it possible to replace string characters using the delimiter and limit of a split function?
For example you have this string "1,1,1,1,1"
I wish to replace sentence number 2 into the string "2" between the "," character so that will be limit number 1.
So the result would be "1,2,1,1,1".
Argument matching parameter 'separator' narrows from 'String' to Ƈ-dimensional array of Char'. ERROR
View 7 RepliesI am reading a text file with mostly alpha characters. the content is not really relevant but the size of each line is very important. The process I will feed this text to will require each line be no more than 50 characters. So I will pre-process the text and add line feeds to make sure that happens.I tried several VB.NET regex like ^.*$ but that doesn't really break up the lines by 50 characters. I would take the result and iterate through each match and then cut it up and write it to an object in memory. Can this be done with a single regex pass?Otherwise I will use a streamreader and on each line check the length and if <=50 write it out with a streamwriter. if >50 cut it up in sections of 50 and then use streamwriter.
A brief example of my text:
119 SMITH KATY AAAA F ZZZ X NB SX ET
MILES,200/LM450
[code]....
I am using a collection to store data from a text file which I am letting the user load and I am using the .split to split and sort the data into alphabetical order and remove repeating words.However, I am having a problem removing unwanted characters from the final array. For Example, "This is the text file that I want sorted. It is random text not yet sorted"
View 6 Repliesi have been trying to remove special characters. i am not able to remove many crlf in middile of the string.
View 3 RepliesI had a submit button,when i click the button,it will verify that the textbox1 is only allowed string input.How can I do so??
View 7 RepliesI had a submit button,when i click the button,it will verify that the textbox1 is only allowed string input.How can I do so
View 7 RepliesI need to create a console program that allows you to enter a string, of which is then outputted in reverse.
Sample:
Input: Diewas
Output: saweiD
Apparently I need to find out about strings and will also need to use a loop.
I got a question. I have a textfile name membership.txt and using vb2008. However my code found error when try to grab the data to an array. I use delimiter "|" to separate between each data in line to save in specific column in database.
[Code]...
Not sure if too many people know this, but the following line will cause an error:
GroupName.Substring(0, 3) = "jt_"
....if the length of GroupName is less than 3 characters. I always thought it would simply return whatever characters in GroupName, but no, it errors. I must be thinking of the old VB6 days.So, I now have to change the code to:
If (GroupName.Length > 2) Then
If (GroupName.Substring(0, 3) = "jt_") Then
Note that the two comparisons need to be on separate lines. If they are on the same line, such as:
If (GroupName.Length > 2) and (GroupName.Substring(0, 3) = "jt_") Then then the code will still fail as the length command is executed at the same time as the substring command- which will cause the error when the GroupName length is less than 3.Just thought that those of us not aware of this should be!
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('9844f9bfb55449e6a786fa62aaadfa20')
dp.SyntaxHighlighter.HighlightAll('f6d554fd98464bdba9159b319e51b381')
dp.SyntaxHighlighter.HighlightAll('93bf4ca63ad8447abdf084d8a9991e15')
my code is :
[Code]...
The error is Value of type '1-dimensional array of string' cannot be converted to 'String'.
I get an Invalid Cast Exception - Conversion from string to double not allowed. I don't know what to do.
Option
Strict
On[code]......
I'm trying to split a Yahoo historical stock price csv file, downloaded into a string, by what looks like a space character. I want a new row for each split. The split function works for other characters I see in the string. I suspect the characters may be a non breaking space character but I've been unable to split on them. This is the test csv file that is downloaded into the string: [URL] I'm trying to split the string like this:
[Code]...
These is the content of my txt file which is saved in D drive in my pc abc,1,2,3..I tried the flowing but it didn't work:[code]I am getting error on this line.. data = line.Split(","c)...it says this line isn't in use anymore or something and that I rather use LineInput but thats asks for filenumber and i don't know what that is. I am sorry but I am a complete beginner. what else can I try? [code]ok that error is gone now but now if I want to add these values to a list box..how can i do that?
View 1 RepliesIs there a way to use the string.split command to get a section of a string without using an intermediary array?for example, if my string is "1 2" and I want to get the "2" part using string.split(" "), is there a way to avoid creating a new array, and just get the bit of the string I want in a single line?
View 4 RepliesAfter having some trouble in my own code using String.Split and the Split(String(), Int32, StringSplitOptions) overload, I decided to look to the MSDN.I copied the entire VB.NET code example from this link: url...I placed it in a new class, and received the following errors (same errors as my own code example):[code]Why can my code not recogognize the string() parameter overloads to String.Split? Remember, i took the code from the MSDN link above, copied and pasted and it still did not work.I am counting on using the string() instead of char() overloads shown here: url...
View 15 RepliesBackground: I have a winForm app that registers a user in the database based on the information provided, auto-generates a random password and username, and e-mails the user a link to take an application based on the marketing company selected. Problem: hen the user clicks "Send Invitation" with data inputted iton all fields except the bundles listbox in debug, the NullReferenceException Error is thrown highlighting the line: Dim MCShort As String = Trim(splitMC(0))How do I fix this issue Here's a screenshot of the web app: Here's the code of the Send_Button_Click method off default.asx.vb:
Private Sub Send_Button_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Send_Button.Click
'TODO Add code to validate that all selections that are reaquired are met.
[code].....