Please can you translate the above line of C# into VB.NET?At runtime, I'm trying to update an existing GridView column, as opposed to adding new columns, just before a DataBind()
View 7 RepliesApparently, part of the problem is that while an ASP:GridView has an OnDataBound() event (which you can use in the code-behind), the corresponding HTML table that is produced does NOT, so you can attach that event to JavaScript. (Did I get that right?) So, that's why I'm having trouble with that bit of the issue. Back to the drawing board. I'm a desktop developer (WinForms with VB.NET) transitioning into ASP.NET development. My mind is really bending around the DOM and JavaScript and Session State and all of the stuff that goes along with web development. I'm not stupid, and I've done research (including hours of video watching and hundreds of pages of "Intro to ASP.NET" reading), but I keep hitting the wall with what seem to be fairly straightforward problems.
Basically, my current situation can be summed up as follows:
I have a page that runs a very long process initiated by the user. The long process can take up to a few minutes , so I want to indicate to the user that SOMETHING is happening.When the process has completed, I either have:
a. Results to show in a GridView
b. No results to show
If I have results to show, I want to display them. If I have no results to show, I want to show a label to the user that says "No results to show."
[Code]...
I am working with two different connections because the information I need is stored in two different locations. One being Oracle, the other being Access. I pull all the information I need from Access with the exception of one field which I pull from Oracle. When I add this field to my datatable, it adds it to the end. I am wanting the column that I add to be between column 1 and 2 of my current datatable. Anyone know the best way to do this? From what I could find, there wasn't a way to re-arrange columns. Here is my code.
Dim da As New OleDbDataAdapter(" SELECT tblSummary.WorkOrderNumber, tblLabor.Crew, tblLabor.NumberOfMechanics, tblLabor.NumberOfHoursPerMechanic, tblTasks.TaskNumber, tblTasks.TaskDescription FROM (tblLabor tblLabor INNER JOIN tblTasks tblTasks ON
[code].....
I wanted to add new column to the existing table in my database table Please help.in the form it has a textbox in which you can enter any name that you want you column to bear. all this will be at runtime.i try but it keep saying (format of the intitialization string does not conform to specification starting at index 0) [code]
View 7 RepliesI have a gridview which shows selected data from a database all the columns will popup dynamically. but now i want to add an additional column with a list box is it possible or just a column will be fine
View 10 RepliesI have been trying to pull rows from my access database into a list box, so the rows do appear on the list box, however the columns are not spaced out, and when I put & Space(10) & inside the ListBox1.Items.Add() the values are all scattered around. How do I fix this?
And how do I add column headers for them?
TransactionTableApt.FilltList(LoyaltyDataSet.Transaction, busid1)
Dim x As Integer = 0
[CODE]................................
I am trying to add values from Arraylist to particular column of grid view.
As:
If (Arr_NewContacts.Count > 0) Then
dgvStayout.Rows.Clear() ' **GETTING ERROR HERE**
dgvStayout.Rows.Insert(0, (Arr_NewContacts.Count - 1))
For i As Integer = 0 To Arr_NewContacts.Count - 1
dgvStayout.Rows(i).Cells("Name").Value = Arr_NewContacts(i).ToString
[Code] ......
Datagrid property like AllowUserToAddRows and AllowUserToDeleteRows is already set to true.I am using above code on lost focus event of one of text box.
I have been trying to modify the data going into a column by adding spacing to the start of the column before the Row ID, using the level to multiply the amount of spaces.Ie. ID is SVG00098 and is a Level 3 Asset, so it requires 6 spaces before the ID.
View 8 RepliesI just want to ask the following infor from you in relation to gridview... I have 3 Grids,
Grid A
Grid B
Grid C
Grid a has already a data but aside from the data in my grid A I want to add another column for a checkBox. Next, when the checkbox is check and I hit the button "Transfer" the row in the grid in where the additional column checkbox has been check will be transfer to grid B and the remaining data will be move to Grid C?
Below code is supposed to update a table in oracle with rows imported. But it seems to update all columns in the table with only the first column which is imported from the CSV file. I figure its the "ReadFields" property which needs to manipulated/changed.
[Code]...
I have column in database
[Code]...
I want when any user search For: Delhi to Manali on between 17-Dec-2010 to 19-Dec-2010 then the price would be automatically changes to $900 in gridview else the default price wold be displayed in fare is $600 if he search for DelHi to Manali after 19-Dec-2010.
I have a gridview with 3 columns, only one column is going to be edited by the user. Whenever it is edited I'd like to set one of the other columns to the current time. A "time last updated" if you will.
View 2 Replies[Code]....
I know that if get datatable in gridview.datasource,ever write gridview.Databind.But I found coding of my friend. He write only get datatable in gridview.datasource but no write gridview.dataBind. Therefore, his coding is not error. Why? Don't need to dataBind?
I have a DataAccessLayer that returns a datatable. The business layer calling it also returns a type datatable.In my form, I call the business layer as a datasource of my gridview and then I binded it.
This codes are working in C# but I have problems when I converted it to VB.NET. During databind it displays the error: Data source is an invalid type. It must be either an IListSource, IEnumerable, or IDataSource.
Can i not bind a datatable in my gridview in vb.net? What do you think is the problem?
I have a datatable with verified 10 rows named dtable. I attempt to bind it to my gridview and nothing shows up on my asp.net page. Why do these relatively simple few lines not populate my gridview?
Dim con As SqlConnection = Nothing
Dim dTable As DataTable
Dim dataAdapter As SqlDataAdapter
Dim sqlcmd As String
[code]....
Im trying to add columns to my database through VB.NET. I have a MS Access database (MDB format). It has a table in it called "TestTable" and that table has only one field in it "FirstField". It has no data in it yet. I want to add columns to it first and then fill data.
[Code]...
I have a GridView on an ASP.NET page that I'm trying to bind to an object data source that I've set up to map to a vb object I made which accesses the DB. When I run the page, though, the gridview comes up empty.
The ObjectDataSource is definitely returning data. The paging parameters are making it to the underlying object. All the way until I get to the DataBind() call everything seems fine. But the grid comes up empty. Funny thing is, if I use the method that returns all records in the DB, the grid populates just fine. Only when I try to implement custom paging does display no records. I've tried using the wizards, I've tried diagrammatically setting it up and run time. No matter what I do I can't get paged data to display in the grid.
oDatasource = New ObjectDataSource()
oDatasource.EnablePaging = True
oDatasource.TypeName = "tblMessage"
oDatasource.SelectMethod = "GetTblMessageSubset"
[code]....
I am databinding my gridview in VB code behind. Because of this I know I can not refer to the NewValues when text is entered into one of the edit boxes. I need to retrieve the value of a column in the RowUpdating event.I have tried to do this in a multide of ways, but each of my changes ends up breaking something else.None of these three methods is working....
Dim DT34 As String = DirectCast(GridView4.Rows.FindControl("Textbox1"), TextBox).Text
Dim TB1 As Label = GridView4.Rows(e.NewEditIndex).Cells(0).FindControl("Label1")
Dim tb1 As TextBox = GridView4.Rows(e.RowIndex).Cells(0).FindControl("TextBox1")
Dim IDVal As String = tb1.Text
In the following code, I am believe it is finding the control but it is not returning the value that was entered into the textbox.
Dim tb As TextBox = DirectCast(GRD4.Rows(index1).FindControl("TextBox1"), TextBox)
updateDescription = tb.Text
My field has been converted to a Template field in the Gridview instead of Boundfield.
I have a blank/unbound GridView control on my form and I am binding it in the code behind like this:[code]Running this code populates my GridView control with all the columns and data that _dataSet has. I want to display only some of the columns, change the column names, and rearrange some of these columns too (i want the last column from the actual sql database table to be displayed first in my GridView).
View 3 Repliesi have retrived this datatable from datasource and i want to add a more colum 'category'basedon the each value of each Role, like if role column has the value '90 daya client' then in the same row it should have a value 'DC' in the category column.n make a temporatry dt1 table but to add related values.
S.No First Name Last Name Role Date
1 Us er1Name User1Name 90 Day Client 11/01/2011
2 User1NameAtt1 User1NameAtt1 90 Day Client 11/01/2011
[code].....
I have a function that returns a list of account numbers as an Arraylist. I am trying to use each account as a command parameter in another sub routine to get more data about each account number. This only returns the data for the last account number in the arraylist. I need to use each account number, call the database, get the additional information and store ALL of the data into a Gridview (databind). Example: If I had 3 account numbers in my arraylist return 3 rows of data to the gridview. I am struggling with how to get ALL of the information for each value (account number) in the Arraylist. Can someone point me in the right direction?? I think this can be done but I am not certain if my approach is correct or not. Perhaps I need to create datatables that contain the additional information for each value passed via the arraylist.
Private Function ReturnMultAccts(ByVal strAcct) As ArrayList
Dim acctsDetail As New ArrayList
Dim dsn As String = Configurati
[code].....
In my application,i have a gridview in which columns are created at runtime.Actually these columns are created when i am entering data in a database table.[code]where Column1,Column2,column3 may vary during runtime.i need to enter values to these columns during runtime.But i cant bind these columns because these are created during runtime.The first column "Description" will not change.It will remain constant.For each description, there will be values for each column.At last these data will be saved to the database.How to add columns in the gridview during runtime?
View 2 RepliesHow to apply databind, so that the recent updated value will be displyed instantly, as i press update button ?
Dim cmd As New Data.SqlClient.SqlCommand
Dim con As New Data.SqlClient.SqlConnection(constr)
Try
[Code]....
I am using the following code to alter an table imported from an Excel spreadsheet
Dim SQL As String = "ALTER TABLE receipts ADD payee integer, account integer, category integer, reconciled boolean"
Dim dataread As New OleDb.OleDbCommand()
dataread.Connection = Connection1
[code]....
Both ExecuteNonQuery() actions yields the exception message {"Syntax error in field definition."}The error message does not happen with the first if the boolean column is not there (I tried Tes/No as a definition - but that also failed.The second query to modify the ID column from autonumber to integer I assume fails because it is a Primary KeyHas?
I was just wondering if it is possible to apply an attribute to a property within a business object (MyBusinessObject) such that after the DataSource of a grid is set to a List(Of MyBusinessObject), the visible property of the column will automatically be false. For example:
myGrid.DataSource = New List(Of MyBusinessObject)
Public Class MyBusinessObject
[code]....
i need to bind two fields to an existing columns. but i dont know what to add on my for loop and on how to bind it to an existing column. see my code below.
[Code]...
VB GridView control will not allow code in the vb code file to access a data column that has its visible property set to false. When it is set to true, the data column can be accessed with no problem. Any suggestions as to how to correct this? I have looked through the documentation, text books, and I have not found anything that gave me any clue as to what the problem could be. I thought that the property was just applied to the column, not that it would remove the column from being accessible.
[Code]...
I have a gridview that is set to a sql datasource, it is generating the columns automatically. If I add a column to the table it is referencing, it will draw that column and display it, but it does not update the insert/update commands to include the new column. Is there any way have it rebuild those commands automatically?
View 1 RepliesI need to save the results of each search that I run on my database, into an excel file. So it is an iterative process where the new search results are added on as new rows to the excel file in each export. I am running the following code which works perfectly fine but for the fact that each export is saved to a newly created excel file.[code]...
View 1 RepliesI have an existing xml document with music playlist information, which is read into a GridView control in Visual Basic. I am now wanting to save any updates in the GridView to that xml document.[code]...
View 1 Replies