In my vb.net winform application, on click of start button the label1.text should be "process started" then some filesaving method will run after finish that method the label1.text should change to "file saved".
Private Sub btnStart_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnStart.Click
lblStatus.ForeColor = Color.Red
lblStatus.Text = "Saving to File"
[code]....
the initial status of label "saving to file" is not comingup. after the Trigger method finished, the status of the label is changing to "File saved"
I've been having this problem with my program hanging up sometimes. I tracked the problem down to the following statement:
me.lblPrompt.Text = strInfoToDisplay
So I checked strInfoToDisplay and sure enough it had in there what I thought it would. So then I checked lblPrompt. I'm using the command window and just using? me.lblPrompt.Text to get the system to tell the the value. Well, guess what it does? It hangs up. I haven't been able to get the command window to tell me one time what's going on. However, I know it has to work sometimes becuase the program (from the user standpoint) doesn't always freeze up the way it does when I can't read the prompt.
I run a thread from my main form that do some stuff i want that each action that the thread do will be written on a lable on the main form. How can i do that? I try to give it a pointer of the form but with no luck since its not allowed by the compiler. here is how i create the thread object in my form:
I have several group boxes on a winform. within each there are several labels.I am accessing the group boxes with no issues but I can't seem to find a way to update the labels within by looping. They have the same name except the last character which is a number 1 - 9. ex. lbl1, lbl2 ... lbl9.I need to update the text of each label in code with text I get from a database ex. lbl1.text = one, lbl2.text = two etc... I want to loop through the labels to assign the text. Getting text from database is no issue what I am not doing properly is getting the labels.
do while QstNum < 10 Dim ln As New Label ln.Name = "SC_Cat" & QstNum
I have a datagrid, Records_tablesDataGridView. when i enter values into it's two columns and hit enter i want to update a label text to show how many records are in the records_table.I assumed that i would find an event in the datagridview properties that i would be able to use. so far no luck.
I have a form that I am loading text (strings) from a database into a label.text (so the text from the database shows up into the label) I have done this code in a class that keeps all my database stuff seperate.
Public Function getQuestions() As List(Of String) Dim question As New List(Of String) objConnection.Open() objReader = objcommand.ExecuteReader
[CODE]...
Within the form that the label is in I have done this code
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Label1.Text(db.getQuestions().ToArray) End Sub
I am basically making a quiz, so that when the form loads, question 1 is on there is 4 possible answers. You then press next button and it goes to the next question.
Is there an effecient way to give one label the ForeColor, BackColor and Text of another one of 3 possible labels? I need to do this frequently for a dozen labels in a windows form.
I am using a label to display a song for an mp3 player. I wanted to scroll the text inside the label for anything that is longer than the label width. I figured out the width of the label and if the width of the text inside the label is longer. But I have no idea how to turn this into subtracting parts/pixels of the text currently displayed and how to append the subtracted parts to the end of the new text.
Sub f1timer2tick() Dim g As Graphics = f1l2.CreateGraphics Dim s As SizeF If f1l2.Text.Length > 19 Then
basically i need to change the text of a label where the name of the label comes from the value of a variable.So, for example,
Dim x as String = "lblTarget" Dim y as String = "Target Text"
In this case the text of "lblTarget" would need to be come "Target Text". Basically, the label that is named the value of variable x would need to take on the text of variable y.
Is there any way to detect if the text in a label is longer than the label itself (assuming autosize is set to false)? I want to trim the text in a label so the last line is a finished sentence (everything after that sentence is removed). I hope you understand what I mean.
I want to go from this:"Hello. This is a test string. Most test stri..."
The code above is what I am using to add the Value of Label 1 (Pizza Total) and Label 2 (Drinks Total), however it seems that in the final total it doesn't appear to add the value of Label 2.
I am trying to learn Background worker and have written up a very simple app to understand this process. My form has a
textbox and a label. When the user clicks on the button, it updates the label with the value that they have entered into the textbox(I know this can be done elsewhere in the code besides the dowork event, I am just testing and learning). Please help..I am not sure what I am missing. The label does not update.
So, I'm working on a simple game in Visual Basic, and I have 2 labels. One named "pointsLbl" and one named "pointsleftLbl":
pointsLbl.Text = "Points: " & points
pointsleftLbl.Text = "Points left: " & pointsleft I also have two integers, one named "points" and one named "pointsleft". The problem I'm having is that when the point boost button is pressed, the labels don't update and also don't show the new points and new points left. Private Sub boostBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles boostBtn.Click
I want my code to do something that will require a bit of time. I want to be able to send an update to a label regarding the progress of the process during the length of the process, so that the user will know how far the progress has gone. Unfortunately, the label is only updated at the end of the process. I try to simulate it with a simple code below, where the label should be updated from 1 to 10, but it is only updated at 10, rather than 1, then 2, etc until 10. It does not help to show only the end!
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Me.Cursor = Cursors.WaitCursor
I'm trying to update a label to indicate how many items in a CheckedListBox are checked. Here is the code I'm using:
Private Sub CheckedListBox1_ItemCheck(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles CheckedListBox1.ItemCheck Me.Label1.Text = "(" & Me.CheckedListBox1.CheckedItems.Count.ToString & ") of (" & Me.CheckedListBox1.Items.Count.ToString & ") Items Checked" End Sub
It should say "(x) of (y) Items Checked" each time an item is checked or unchecked, but it's not updating the label properly, the count is always off by 1.
I have a Windows Form1 with label and i want to update the Form label text from the class file. I can able to get the Form1 controls from the class file but it is not updating the value in the Form. VB.net
Below is the Form1: Public Class Form1 Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
how to make a label update and add another letter beside it? E.X : I want it to say Loading then 1 seconds later it goes to loading. then to loading.. then loading...
I'm having an issue wherein after I run a search filtering a datagrid, the corresponding datadetails will not update anymore when a new item is selected in the datagrid.I would like it so after clicking an item in the datagrid, the details update automatically.
[URL] The problem is, after running a search (or hitting 'show all') the label/details no longer change when selecting a new item in the datagrid.[URL]
Private Sub Sheet1BindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Me.Validate() Me.Sheet1BindingSource.EndEdit()
[code]....
To clarify, the search itself filters the datagrid perfectly as intended....it just seems to stop the details from updating when new items are selected which is my problem.
I have a content page which contains an UpdatePanel and has a combobox. When the combobox value is changed I want to change a label in my Master page. So, the main problem for me is that I don't want to make a full postback with every combobox value changing. Is there some trick to overcome full postback?
How can I keep a label on my form with the current count of the selected rows. My DGV has a checkbox (unbound) and 3 other columns. When the user clicks on the row I want the checkbox to either be checked or unchecked depending on its status and update a label the is below the DGV to show how many rows are checked. DGV is FullRowSelect.
I am having trouble adding label.text, datetimepicker.text and ComboBox1.Text into listview1 box.I have set up multiple columns, one for the label, one for the date and one for the combo box text. All i have done is:
1) I am trying to use background worker to download a large file and update a progress bar to reflect the changes as the large 5GB file is being downloaded, and also update percentage completed to the label.text(lblInfo).
2) As I was goggling I came across some info that a web client is needed to calculate the maximum size of the file and divide by 100 and you can stream it down with the web client. Reading it is one thing, implementing it is another as I spent week trying to get it to work.
UCPocoAPoco Imports System Imports System.IO Imports System.Diagnostics
I have a MultiView with several Views within it. When the ActiveView changes I want to selectively databind a label that is in one of the views. Ideally, I don't want to do it every time the ActiveView changes, rather only when it is actually the view containing the label that is active.[code]...
