Use A Checkbox To Add Data To Its Own Item In Datarepeater Control?
Sep 21, 2009
I am using the Datarepeater control to make a report. I am including the a couple of bound labels and a checkbox in the Datarepeater item template. When I run the report and multiple items come up, I'd like to use the checkbox and clear the items by resetting there values to NOTHING. When I check the checkbox for the item, how do I code it so row.text=nothing only applies to the row that the checkbox is on?
View 1 Replies
ADVERTISEMENT
Aug 31, 2011
I have a checkbox as a control in a datarepeater object. I have an event handler function which handles the checkchanged event for this checkbox and sets the visibility of other fields based on it. However, the problem I am having is that the event handler function is getting fired when I set the datasource for the datarepeater - hence when the data is being populated. So the event handler function ends up trying to set the visibility of a field that has not been created yet and bombs out with a NullReferenceException error. Is there a way to stop this event handler being fired when the datarepeater is being populated? I only want this function to be called if that checkbox is changed by the user after the form has loaded.
View 2 Replies
Mar 28, 2011
I'm seriously about to abandon this DataRepeater. I don't want to. I want greater design control than the DataGridView. I've played with various Events for days and have settled on the CheckBox.CheckChanged Event.
What I'm trying to accomplish: My Bound DataRepeater has an UnBound CheckBox in each DataRepeaterItem.When the user 'Checks' the CheckBox, I want to change the value of a NumericUpDown Control to the value of a hidden, Bound Label.
[Code]...
This causes other, seemingly random, DataRepeaterItems (Rows) to also become Checked and thus it's NumericUpDown value to change.Am I going about this from the wrong angle? Can't see the forest for the trees?
View 4 Replies
Apr 29, 2010
Visual Studio 2008 service pack 1 comes with Visual Basic Powerpack and has DataRepeatr control. i want to know that how I can add data in this control. i have in memory data. the examples i found on net are about binding DataSet to DataRepeater by fetching data from database. i want to bind in memory data. how to do this.
View 1 Replies
Feb 25, 2011
How do i make sure that the changes "done" by a user interacting with a DataRepeater control are reflected in the corresponding database source table? I have used DataRepeater in VirtualMode, do I have to supply my own code that will "actually" make corresponding changes to the actual tables, or is there a way of "configuring" or "binding" the controls on the DataRepeater to the "dataSet" so that the changes made by the user are reflected automatically in the underlying table? Whatever I have tried so far has yielded no results; whenever i edit the data on the control, the actual data is not updated. I attach a file showing the only events under which i have put some code: Load event of the Windows form, and the ItemValueNeeded event of the Repeater Control.
View 4 Replies
Apr 13, 2010
im trying to figure out how on earth to set a checkbox on a DataRepeater row to true. Nothing ive tried seems to work. Ive searched all over, and all i seem to find is ways to check the state and in ASP.
Text boxes would be:DataRepeater1.CurrentItem.Controls(
"textbox1").Text = textbox2.Text.However, checkboxes wont work in this way. DataRepeater1.CurrentItem.Controls("Checkbox1").Checked = True"Checked is not a member of windows.forms.control" - ive tried various things in order to set it to true/false, but whatever i do doesent work. I expect its going to be something stupidly simple, but its those things that annoy the most IMO!
View 1 Replies
Jan 17, 2011
Is it possible to get value of a text box, say at row 4 of a datarepeater. I did it by moving control to it, but that does not work the way I want. I used code DataRepeater1.currentIndex=5, and then picked the value. Is there any possibility of getting the value without moving control to this row. I mean the way we get value from datagridview (vrName=datagridview1.item(1,1).value)
View 1 Replies
Jan 17, 2011
Is it possible to get value of a text box, say at row 4 of a datarepeater. I did it by moving control to it, but that does not work the way I want. I used code DataRepeater1.currentIndex=5, and then picked the value. Is there any possibility of getting the value without moving control to this row. I mean the way we get value from datagridview (vrName=datagridview1.item(1,1).value)
View 1 Replies
Mar 24, 2010
I like the datarepeater control (cool toy) but it doesn't show in my WPF toolbox.
View 3 Replies
Apr 12, 2011
Is the "DataRepeater" control derived from the "Visual Basic Power Packs" applicable on ASP.NET web forms? If not, is there a similar control for use on the ASP.NET web pages?
View 1 Replies
Sep 10, 2010
is it posible to change a width of dataRepeater vScroll control
OR
How I can simulate mousewheel on datarepeater.item ?
View 4 Replies
Jan 15, 2011
I have a table in my MySQL database and it contains these items:
User_ID(Primary key, auto-increment)
Username
AvatarPicLink
Location
How can I insert everything into a Datarepeater? Username would be in a Label as would Location, and AvatarPicLink would be in a Picturebox.
View 2 Replies
Nov 24, 2009
I am manully adding data to DataRepeater, but once scrolling up and down, the data is vanished. I have only a text box in the item template.
DataRepeater1.AddNew()
DataRepeater1.CurrentItem.Controls("txt1").text="yehaa"
View 3 Replies
Jul 9, 2010
Here is what I have but it only works when clicking on the row. I have tried a For Each and it still only does it when clicking on the row and not every time.Basically, I am trying to get a button to change the way it looks or if it even appears and them making a picture box appear or not.
If DataRepeater1.CurrentItem.Controls("TRANSPORT_SUFFIXLabel1").Text = "A" Or DataRepeater1.CurrentItem.Controls("TRANSPORT_SUFFIXLabel1").Text = "B" Then
DataRepeater1.CurrentItem.Controls("Edit_Checklist_Btn").Enabled = True[code]....
View 8 Replies
Dec 13, 2010
I am refreshing a form, and I want to assure the checkboxes are cleared when refreshing. I can clear the textboxes and masked textboxes, but cannot figure out to revert the checkbox back to the UnChecked state.
[Code]....
View 8 Replies
Jun 4, 2012
I am using datarepeater to display rows of information from database. When i click a 'save' button and i would like to loop through the rows of data in repeater. The code i am using is able to do all these. The only problem i encountered is at the Interface side. When i am looping the data-repeater. The selection 'frame' (refer to the picture point as 'A') is moving from record to the next record and scrollbar is auto moving as well to scroll to further down until the last row where looping finish.Is there anything can be done to remove the selection 'frame' and stop datarepeater from scrolling while looping the datarepeater.
View 8 Replies
Jan 7, 2011
I know how to add a item(checkbox) to a toolstrip dynamically, but I want to add a checkbox which is exists in a form. I've tried using the code
[Code]...
but this makes the already existing checkbox, go to the top left of screen and when the toolstrip is click it appears. So I want to add the checkbox to the menu, without going to top left corner,
View 1 Replies
Jan 17, 2009
i need a little bit of help with the checkedlistbox. What i want to do is add a phrase or a reminder and if i check the checkbox of that item, i want the text to be strikeout (the text with a line in the middle) and when the form closes i want it be removed from the checkedlistbox.
View 2 Replies
Sep 30, 2011
I want to check a checkbox of the selected item in a checkedlistbox but option strict disallow it. How can I do it without turning it off?
Dim clb As CheckedListBox = DirectCast(sender, CheckedListBox)
clb.SelectedItem.checked = True 'late binding error
View 3 Replies
May 16, 2011
My form contains a combobox which contains several usernames which are bound to my database.I've added a checkbox to the form which will be used to select the default username from the list.
View 8 Replies
Sep 28, 2011
Is that possible to provide a combobox that each item has its own checkbox?I'm looking for built-in component that enables it. I remember it was possible on VB6 but can't find it in VB.NET 2008
View 5 Replies
May 14, 2012
I have a checkbox list which is filled with entries from my database on page load. I need to update an entry in my database when a item is checked and when an item is unchecked. Right now I am doing the following:
<asp:CheckBoxList id="check1" AutoPostBack="True" TextAlign="Right" OnSelectedIndexChanged="Check" runat="server">
</asp:CheckBoxList>
And the function:
Sub Check(ByVal sender As Object, ByVal e As EventArgs)
Dim sql As String
If check1.SelectedItem.Selected = True Then[code]....
The error is: "Object reference not set to an instance of an object." Is there a better way to check if a list item is checked or unchecked?
View 1 Replies
Apr 18, 2012
My program takes a checkboxed item and depending on the serial number that is present on the item on the invoice, subtracts one from the amount list I have the following in a listview on a details page which I added with the following
[Code]...
Right now it doesn't look like it does anything. I have tried changing my index's on my subitems to 1 and 3 instead of 0 and 2 but i figured because they are subitems that they need to be subitem index 0 and subitem index 2. if that makes sense.
View 18 Replies
Nov 6, 2009
I have a SQL Server 2008 Express database and am working with VB 08 Express.I have a field in my SQL table that is a bit (for boolean)When I drag the details onto the designer Checkboxes work. When I drag the datagridview on the form the checkboxes in my datagrid are all set false.
View 2 Replies
Aug 6, 2010
I have a gridview that uses a stored procedure for its select statement. The stored proecedure accepts a varchar and a bit. I want a checkbox outside of the gridview to change the value of the bit. I've set the parameter to the checkbox but it doesn't seem to be working.
View 1 Replies
May 25, 2012
Regarding my college project. i'm working on a sales system . i have a form which consist of all the following information( item code , item name , item price , quantity of item ) which is display using a data grid . data input by user using text box and all this information will be stored in a database(sales database) i'm using ms access 2007. the grand total will be displayed in a text box . and amount paid will be input in a text box too , my major problem now is how to i create a reciept that will have all this information of the purcase. i have a reciept button . what the next step ? i dont have any idea how to get the reciept done.
Imports System.Data.OleDb
Public Class Form5
Dim con As New OleDbConnection
[CODE].......................
View 9 Replies
May 11, 2012
How can I implement the following:I would like to have a checkbox on the top of my gridview. When checkbox is checked should show all the hidden rows from the gridview but when is unchecked should only show the unhide ones.
I only need 1 checkbox at the top(not in the header of the gridview), I found couple of examples but all of the have checbox as coulumn and then added to the header as well.
View 1 Replies
Apr 25, 2010
How can I implement the following:I would like to have a checkbox on the top of my gridview.When checkbox is checked should show all the hidden rows from the gridview but when is unchecked should only show the unhide ones.
View 6 Replies
Nov 10, 2011
How do I make one of the items in my checkboxlist automatically selected upon page load? The items in my checkboxlist come from a SQL DB and I want one of the fields to be automatically selected. I have found simple solutions to this question if I was not retrieving my checkboxlist items from a Database?Here is my code for my 2 relevant pages:
ALCounties.aspx.vb
Imports System.Collections.Generic
Partial Class ALCounties
Inherits System.Web.UI.Page
[code]....
View 1 Replies
Sep 29, 2009
I am assigning a 'ds' dataset to datagrid.In addition to that I want to add new column with check boxes.That new column will be first column of datagrid. Currently I am using below code,
DataGrid1.DataSource = dsResult.Tables("Result")
Result table has 4 column....in addtion to that i want to column "Selection" with check boxes
View 1 Replies
