I have a form (say Form1) opened into a MDI Container form, and I want to open a new form (Form2) as a child of Form1. I open it with Form2.showdialog() but it don't act as a child, I mean, I can move it outside the bouds of the Form1 (and even the MDI)
View 2 RepliesThere is any container for vb.net like the map in c++?
View 2 RepliesSay I have some constants that depends one of other, and I decided to keep them together in a container instead of keeping it as individual constants in a class.I thought use a Structure for that scope, but compiler force me to declare a private member for that structure.
[Code]...
is there a way to design my own rtb which can act like a container? I mean I want to add the functionality of a container e-g panel to rtb. How can I start it?
View 7 RepliesThis is more of a ASP.NET question, but we are using VB.NET so it might be relevant. We just recently upgraded an ASP.NET 1.1 project to 4.0.Once we started running through the app to regression test it, we found that (consistently) if we made a call like DataBinder.Eval(Container, "PropertyName") from a User Control, ASP.NET complained that it could not find the PropertyName on the page.
PropertyName *does* exist on the User Control, but not on the page.This worked up until we upgraded to 4.0.The fix we found was instead of using "Container", we used "Me" to reference the control that the code was being called on.
start a desktop app. make the form 1- MDI Container = True. 2- Right to Left = True , 3- change the Right to left Layout = True.Set the background to any jpg image, when you run the form, the backgroud disappears.
View 3 RepliesVB 6.0 had a Set Pixel function, which is not available in VB.net. using a draw ellipse function with parameters specifying a circle one pixel in diameter.The above is painfully slow.I have been drawing graphics in a Bit Map using a Set Pixel function & then copying the entire graphic from Bit Map to a Picture Box. This results in nothing seeming to happen for several seconds & then the entire graphic is displayed in the Picture Box.
The above does the job, but it would be nice to display the graphic as it is being generated pixel by pixel, which was possible using VB 6.0, Might there be a Windows 7 API which would set a pixel? Might Microsoft be considering a Set Pixel function for Picture Box graphics?
I made a User control.I add two Panel in this Usercontrol. But i want one of panel keep control like container when i add my usercontrol in the from.but when i add user cousercontrol does not contrin any controlntrol in the from but my . how can i user usercontrol like container
View 3 RepliesIt is possible to anchor 1 control with other control instead of container. I mean suppose i want to maintain fix distance between 2 controls during resizing form.
View 1 RepliesI am trying to migrate large data that is required for our website hosted on Azure to access. The data amounts to about 7GB. After reading few forums, I have come to know that SQL Azure BLOB Storage can do the trick for me. how we can store data in SQL Azure BLOB Storage and access it? At first I want to try to store a Test.txt file in the BLOB and access the contents of this file from our website and display it.
View 1 RepliesI have a Repeater on one of my pages like so: [code] But, when I run it it errors out with the message:'btn<% Container.DataItem %>' is not a valid identifier.I want to append btn to the Container.DataItem value so that I have dynamically assigned control names that are associated with the underlying data item. Any ideas?
View 1 RepliesI have an older VB6 program that uses a MDI sheet. this program was upgraded to VB.net. I can not get a new Windows Form to use the MDI Container. the new sheet lays over the top of the MDI sheet.
View 10 RepliesHow do I change the back color of my MdiContainer?
View 1 RepliesMy doubt is :1] I have got many forms and MDI container. There is close button on all the forms.One of the form name is Homepage.2]Whenever the user clicks on close button,i.e.the cross button with minimize and maximize box, The form will close but at the same time it should redirect to homepage.3]I know to show new form ,we use Homepage.show().But,This homepage.show() is written in the code when we got button or other controls.4]What can be done with this cross close button? How to code for this?
View 13 RepliesThis line of code((Matches)Container.DataItem).MatchIDworks in C# but in VB.NET, when used in a Repeater, I get the error
View 2 RepliesI have the following [code]...
when i draw the rectangle, the moment the container refreshes itself i lose my shape or if i run the app in full screen and then into normal window mode the shape either gets clipped or deleted. I would like to create a grahpics container to always keep the shape 'alive'.
I have a user control called UCO and it is being put in many diffrent forms.How can i refer to these forms from the code of the UCO?For instance, how can i get the color of the form and make the UCO have the same color?
View 1 RepliesWorking in VB.NET, in a repeater. I only want to display part of the repeater if one the data item's fields is set to true.I am struggling to write a line that will accomplish this but am trying along the lines of this:
<% If '<%# Container.DataItem.IsLive%>' Then %>
<asp:PlaceHolder ...
<% End If%>
In my program, I want the user to be able to move an MDI child window anywhere inside the MDI container but I need it to be kept completely inside the container boundary. For example, the upper left corner should never be at a location less than 0,0 when moved left or up. Currently, if I slide the child window too far left, it extends outside of the MDI container window and the MDI container shows the bottom scroll bar.
Is there a way to prevent the child window from moving outside of the boundaries of the container window? I tried adding code to the .move (see below) so that if the new location was less than 0,0 then it reset it to 0,0 but then the child window controls flicker as the window is moved beyond 0,0 and the logic moves it back to 0,0. It appears that even though the code changes the location to 0,0 and the window shows the child moved to 0,0, when the mouse moves again, the window jump back to its unmoved location.
Private Sub MyForm_Move(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Move
If Location.X < 0 Then
[Code].....
I have a split container. the first panel is a richtextbox.. my question is how will i put a cmd on the panel 2 of the split container
View 13 RepliesI need a recommendation for a data container. I am loading a sequence of letters (Latin characters) into a text string.I then want to pass the individual characters into a 2-D matrix-like container (i.e. populate left to right based on # column assumption).I then want to search for patterns within this matrix using rules similar to that of a crossword puzzle (Left to Right, Top to Down, Left to Right Diagonal).What is the best container to do the anlysis in?I am assuming the decision to this will be based on the search flexibility of the container.My initial goal is to use crossword puzzle rules as noted above.But I may want to expand this to search backward as well (ie. Right to Left).
View 1 RepliesI have a picturebox in a groupbox (which was generated by code). The click value of the picturebox has been assigned a click event. AddHandler pctIcon.Click, AddressOf FooClick Inside the groupbox there are two labels aswell. I want to get the name of the groupbox, so I can use it in a for each loop.
[Code]....
I have a mdi container thats got 9 forms running in it.When I minimize a form it minimizes into a small "window" in the left-bottom corner of my mdi-container.
How do I change this so that the forms will minimize to the Left-TOP corner of my mdi-container?
I'm trying to add a DataGridView to a Split Container Panel. I am able to add the control, but it just places it on top of the old one.
What I want is to add it below the existing one.
I need to dynamically add ovalshapes to a form. The application user would enter a number of shapes (variable), and other parameters for the shapes as location, color,etc. After this I need to display these shapes in the screen. Every sample I found shows a fix number of shape hardcode by the programmer.
View 4 RepliesI have a ListView in which i have a function that creates images for users.I pass userGender,userImage1name,userIsImage1Aprooved values to the function in which i generate image.ie. if user has approved image i return it back, otherwise i return default image based on gender.
My question is, is there any way to avoid passing 3 parameters to that function and to pass whole DataRow so i can get values of columns i need?In reality i pass about 12 parameters just made it easy for you.ie. i want to achieve something like that <%# GetImage(Container.Item) %> while in GetImage() i would be able to access Item("some_column_name") or C# version Item["some_column_name"].
-I have a form where IsMdiContainer = True
-I add Split contaner which has 2 panel vertically (panel1 and panel2)
-In Panel1 I have buttons where every button should display a form in panel2
I want to display a form in the center of panel2 .I had tried the below code and not working
frm_Login.TopLevel=False
frm_Login.Parent = Me.SplitContainer1.Panel2
Me.SplitContainer1.Panel2.Controls.Add(frm_Login)[code].....
Should I do the math my self and assign Top and Left to the form?
I have two group boxes M Commands and C Commands on the same Dev tab page. I have P Control group box that is located in the M Commands group box that I want to move to the C Commands group box at load time.
View 2 Repliesis it possible to collapse both split container panels? the idea is that by collapsing both panels of one container, my textbox which is outwith the split containers can give the impression of being "maximised" in the form.
View 2 RepliesHow can I dock my report viewer control into its parent container, using code.
View 2 Replies