i have developed a system which needs to process funds transfer using means of mobile phone sms(short message sent). my problem is that i don't know how to intergrate the application with the sms gateway. suppose sms has been sent through the gateway,what will trigger the system to respond since message from phone enters database directly.
View 1 RepliesHas anybody tried developing an SMS gateway application with VB.NET?What gateway did you use? Was it successful?I'm trying to gather ideas. I'm open to gammu, but a bit hesitant.
View 1 RepliesI have a goip modem (Buy GoIP, voip adapter, GoIP4, DBL GoIP4 GSM VOIP Gateway 4GSM VOIP Voice Gateway Guaranteed 100% Brand New #RG0001 atalready has the sim cards it needed. I'm connected to the device using the IP Address and entering username and password to access the modem configuration. Is there any here has an idea on how to create a SMS Server from a seperated Computer and the SMS server will schedule the sending of the messages. My problem now i
View 2 RepliesI am trying to clean up my code in a project I have been working on by creating two separate modules one that disables a service and one that enables a service through the registry all of this worked fine in one big form all together but I would like to also reuse the module in some other projects, I am getting this message however "Warning1Function 'ApplicationLayerGatewayDisable' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used". [Code]. what do i need to do to get rid of these warnings ? or do I just ignore them?
View 12 RepliesI want to develop an SMS gateway in .NET, using PDU encoder/decoder classes. It's working fine for me, but the problem is receiving multipart SMS messages. I want to handle these messages with segmentation and reassembly, like Ozeki SMS gateway. Ozeki SMS gateway stores every multipart SMS in a file; I want to do the same thing.
View 1 Repliesi am working on standalone application to send and receive sms, but wan to create my own sms gateway.
View 1 RepliesI want a code to display the users current "default gateway" & and "DNS server + Alternate DNS server" as (label1, 2, 3). And also show duration of connection, network speed and signal strength if possible.
View 5 RepliesIs any opensource SMS (Short Message Service) gateway written in C# or VB.Net.
Gateway must support AT command mode.
I don't need SMS service, I need library to communicate with mobile phone or GSM modem (AT command mode)
I was wondering is it possible to use C#/++ and php to connect to a mysql database? I ask because seems my host doesnt have remote access setup for me to access my database.
View 1 RepliesHow can I determine the primary gateway (ie: my router) for my default Network adapter? I found this thread but it doesn't work on all machines; ie: computer has Hamachi. I've got this function that returns the proper IP however, I just need to correlate it with the gateway it uses:
Public Function LocalIP() As String
' Obtain the first address of local machine with addressing scheme
For Each IP As IPAddress In GetHostEntry(GetHostName()).AddressList
[Code]....
I want to add Payment gateway in my website. Any is plug-in or we need to write a code ?
View 5 RepliesI want to know how to send the sms from vb.net application without using sms provider gateway. i want to send sms through web.
View 4 RepliesI'm trying to figure out how to view the default gatways ip address and then get the mac address from that
how to see what the computers defualt gateway is?
I'm developing a software to determine my default gateway..
I am currently using this code with success[code]...
I want to find a Gateway of a particular network adapter, May be we can write code to find through this System.Net.NetworkInformation.GatewayIPAddressInformation but i don't how to code it.
View 2 RepliesGateway Timeout in FTP Download module?
View 7 RepliesI am developing a windows application for my guys on helpdesk to use with our clients. It is going to be installed on the clients' pc's. One of it's purposes is to display all IP info of a computer. Such as the client's IP address, DNS IP address, DHCP IP address, and Default Gateway IP address, but I can only get it to give me the IP address of the host and no addresses of the DNS, DHCP, or Default Gateway. I know that I could run an ipconfig /all and pull the results into the application, but I would like to have it laid out more simply for it to be easier to read for the clients in case we are walking them through some troubleshooting over the phone and we need their IP information. I do not require and am not requesting any source code.
View 6 RepliesI have a DGV and a button to open a browser window to an ip address and also a button to open the ip address gateway. I can open the ip address that is displayed in the DGV no problem. What I am stuck on is opening the gateway address. So for example I click a record in DGV then the button and my browser opens to 10.15.2.248 What I need to do is replace 248 with 1 The ips will all end differently though for example 10.20.2.34 , 10.256.34.4 and so on. So as far as I know I will have to trim to the last period and add a 1 How can I do this?
View 4 Replieshow i can go about getting basic network information such as the ip address gateway etc
View 2 RepliesI managed to obtain the primary adapter's IP address here: [URL]
But now I need that adapters gateway, ie: 192.168.1.1
I am developing a desktop application in VS2008 with C#. How can I send an SMS using a secure gateway?
View 3 RepliesI am writing a quick program to display the network information of a computer without having to run ipconfig or enter the TCP/IP settings on the network adapaters.I have managed to pull the computer name, local IP address and the external IP address, but I now need to get the default gateway, the subnet mask and the DNS resolvers.I have tried using the registry, but the key differs from computer to computer, so that method has been ruled out.
View 8 RepliesI share my internet connection with other users through LAN. There's some one who keeps cutting me off from time to time to increase his download speed.I know that there is some orders that can be written in the command line to reconnect to the internet after every cut but I don't know them.I started teaching myself programming under VB 2008 Express as a hobby few weeks ago. I was wondering if there is a way to write a program in VB to check the connection condition every few milliseconds and reconnect again to the real gateway till the attacker get bored.
View 25 RepliesWho can write a windows service used as SMS gateway to push and pull sms to database..
View 3 RepliesI have been asked to take all our gateway pages (written in classic ASP) and make one universal gateway page to the few C# .NET applications we have (that I wrote). I tried searching here and the web and couldn't find much of anything describing a great way to do this and figured I was either not searching properly or was not properly naming what I am trying to do.
I decided to to take one of the main gateway pages we had in classic ASP and use that as a base for my new gateway. Without boring you with a bunch of code I will summarize my gateway in steps and then can take advice/critique from there.
EDIT: Basically what I am trying to do is go from a classic ASP page to a ASP .NET page and then back again.
My Gateway page: In the first part of the page I grab session variables and determine if the user is leaving or returning through the gateway:
Code (in VB):
uid = Request.QueryString("GUID")
If uid = "" Then
direction = "Leaving"
[Code]....
I am in the process of developing a messaging framework for a windows application that sends messages to a java application. To be precise when the win app wants to send a message it simply drops the message in a common database table which will be picked up by the java app. The windows application is deployed across 10 application servers (10 instances) over citrix for load balancing.Each instance of the application is capable of sending a message to the java application and each of these messages should have a unique id. From my end I need to make sure every message generated has to carry a unique id so that they can be identified when necessary. All the messages can be cleared every day or two.i am not quite sure about a best method of achieving this. Initially I wanted to create a static method that serves the next available id (incrementing the last id by 1). But this approach willn't guarantee unique number as the application starts only when at least one user is logged on. For e.g .On one server the app starts when a user logs in, he then sends a message and then the application stops when that user logs off. So when a next request for the app comes to that server a new instance will be started.
View 3 RepliesWhen I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
View 2 RepliesIm planning to create a Remote Desktop Application and I'm having problem with viewing other computers monitor or screen.
Im not asking for the code on how to do it. and one more thing is it safe to use winsock in creating a client/server application?
is it possible to make one application send a task to another application and recieve the result from that secondary app?i made a text editor program and i added a scan feature and i made another app that has ocr capabilities.The scanner ability is in my text editor program, the ocr program doesnt scan you have to input an image into it and it will give text result a few seconds later.the prob is alot of times the ocr code uses sooo much memory and crashes when its incorporated with my text editor, but individually each application works fine and doesnt take too much memory. Memory wont be even an issue if the ocr program is standalone so that when it is done decoding image the application can be made to exit. now here is the question, how do i make my text editor send the image to the ocr program and how do i make my ocr program send the text back to my text editor? is it possible? i mean the only way i know off is creating temp files in a certain folder and having a timer on each program that keeps waiting for temp files. That just seems like pretty lame coding to me i was wondering if there's a better way?
View 11 Replies