User Input 10 Inclusive Numbers Between 100 And 199?
Jul 27, 2009
I have been trying to have a user input 10 Inclusive numbers between 100 and 199, but it doesn�t seem to be working, can someone point out where or what am I doing wrong?
I have a program that allows a user to input numbers from an inputbox and it displays the Total numbers entered, the sum of the numbers entered, and the average of the numbers entered. What I can not seem to find it how to have it display the largest number entered. The code I have so far is,
I'm using Visual Basic 2005 Express. I've got a simple problem, I need to read 20 numbers, between 10 and 100 inclusive. As each number is read it should print, only if it is not a duplicate of a number already read. I should be using a 1 dimensional array that is as small as possible.I went ahead and made the 20 numbers random, instead of just plugging in numbers into an initializer list.
i want a user to entera number and then check if the number entered fall between the minmum number specified and the and maximum number specified inclusive.i have this code but itis not working for me as i want.that is if the entered number is not within the min. and max. inclusive then it should promt the user.
if number>=minnuber and number <=maxinumber then exit sub else messagebod.show("number is out of range.number must be between the minimum and the maximum number") end if
I addressed a meeting and used the following....she worked there for 17 years.I was corrected later that it should have been 16 years.I argued that the first year of this persons employment was 1966 and her last years work was 1982. Therefore 17 years.Does someone have an articulate mathmatic reasoning that explains dealing with inclusive numbers.
I have an assignment that is supposed to accept user input of random numbers. The only part I'm struggling with is I'm supposed to make copies of the array after the user is done inputting the numbers. These copies has to be sized exactly to how many numbers the user input. Am I supposed to use a counting variable and if so how?
using for...next loop the program is supposed to accept 2 user inputed integers and display all even numbers between the two in one label and all odd numbers between in another label.
Private Sub displayButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles displayButton.Click ' displays the odd and even numbers between two integers Dim intNum1 As Integer
[code]....
I'm not exactly sure what this code is doing. When I put 1 in the first number and 10 in the second number, the odd label only shows 9 and the even label only shows 10. Another example is when I put 2 and 15, the odd label comes out as 15 and the even label is 14. I'm very new to VB and programming in general and have just started getting into for...next loops and don't fully understand what the counter is or how the loop is supposed to work. I guess I'm having 2 problems. One is that I don't know how to make the program find the right numbers(my logic is off? or how I set up the loop isn't right?) and the other is the labels are showing only 1 number each instead of all the numbers in between on their own line.
I am new to VB.Net and programming all together. I am trying to make a program that will take 2 numbers input by the user, Add them together and display the sum. Then take the sum and divide it individually by each number to give you what percent of the sum the numbers are. I'm working on making it a program that will calculate the Hardy-Weinberg equilibrium for my Anthro Class. I'm just doing this for practice for my VB.Net Class. But i will move onto that at a later time. I just want to finish this first.
So.. Here is my code so far. It's not complete yet but this is should be enough to make it function.
Im working on writing a program for doing standard deviation and as of right now im running into one slight issue with subtracting my mean from the original numbers. I will post most of my code so you can get an over view but i mostly just want help on this one little part for now. Im going to be making a website for school and put some programming stuff on it so i wanted to make just some random programs for it so this is school related but not really homework. It's line 26 and 27 that this is relating to. When i put a stop in my code and look at the result of arrayDifferences it gives me 0.0 when it should be -1. I know i can go this route and say arrayDifferences(1) = arrayDifferences(1) - arrayAvg but seeing as how i want this to be a random number of numbers input by the user i cant do that.
I need to take user input, validate to ensure there's no negative numbers and display monthly fee and check fee in a Label.....with a calculate button_Click
I'm currently in VB class at my highschool and we just got chapter 6.1 to read on this online textbook that we follow. Anyway, we are doing loops now and the problem reads "Write a program to request positive numbers one at a time from the user in an input dialog box. The user should be instructed to enter -1 after all the positive numbers have been supplied. At that time, the program should display the sum of the numbers." So far I know this much
[Code]...
Now I know this isn't right But I can't find out how I'd pull out the numbers the user entered to get the sum of them and not include -1 because as it stands, when I hit ENTER with -1 the label just shows -1.
I know how to read user input using textbox but it only can read character and numbers. Is it possible that I want to read user input equation?
Example:
User type A+B User put range of A and B. 1.25<A< 3.56 2.45<B< 9.87
I failed to read the equation using textbox. Is it there are other ways that can use to read equation input A+B?I am using VS2005 and VB.Net. I really new in this programming using VB.Net.
I'm using VB 2010 and need to multiply 2 user input numbers in forms, so basically: TextBox5 = TextBox2 * TextBox3 That obviously didn't work but it shows what I want it to do.
i have one more issues, and hope is the last for now. How can I limit a textboxe's input to only numerical with certain range of values (eg -10 to 10) and with that happening while I type in the values?
I need some help with the input validation of my application. Attached is the code that I have written as well as a screenshot of the front end. I specifically need input validation to verify that the user selected input for cbLengthOfStay is a number between 1-10 as well as input validation to verify the user input for txtMedication, txtSurgicalCharges, txtLabFees and txtRehabilitation is a positive numerical number. Please feel free to critique my attached code. [Code]
If my Category and Forum selection is incorrect I am sorry and feel free to move it. I'd like to have the users input in the message box that will show. For example: There is a textbox and the user puts in their name as Bob. Then the message box would be: What my main goal is, is being able to include the users input they type inside the textbox inside the message box.
I am making a program, where the user enters 6 numbers in 6 different text boxes, and it displays the larger of those 6 numbers. But I also want to make it where if the user enters a string value (like S for instance) in the text boxes, it gives an message and says "please enter the numbers again" and the user gets to enter the 6 numbers again. But when I do try to do that, it gives an error message saying conversion from "w/e the user entered" to Double is not valid. If the user just enters the numbers, it works fine. However, I am trying to make it if the user does enter non numeric value, it gives a message window and the user can reenter the numbers again.
Here is my code Example
CODE:
This is where I am trying to use IsNumeric to show a message if a user does not enter a string so the user can renter the numbers again, but when the user does enter a string value (say in textbox 1) it gives me an error message saying conversion from "S" to 'double' is not valid.
CODE:
Then right here this is where I have my series of ifs statements, this part works fine, it displays the largest numbers of the 6 textboxes every time. Error free.
CODE:
And do this with variable number 2, 3, 4, 5.
I know there are easier ways to do these with arrays and stuff. But I am not there yet. I am still learning about ifs and stuff.
Option Strict On Public Class Form1 Private Sub btnDistance_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDistance.Click 'The btnEnterSpeed click event accepts and displays up to ten speeds from the user'and then calculates and displays average speed
[Code]...
I cannot figure out how to incorporate the number of days into the input box then get it to loop and count the number of times the User inputs in the number of days. Then I have to incorporate it into the equation to get the total distance D = MPH * Hours. What I have right now wil not count up the number of days and locks up after I input one number and will not add anything to the listbox. Because I also have to make sure that they cant add nonnumaric values and the number of hours per day cannot exceed 20. I have put things in and taken them out but it has been 2 days and I am lost now
I'm trying to save what the user types in the vb code Dim user as Inputbox("") for example in a .txt file i can save the textbox and listbox but i cnt figure out how to save the inputbox i really need this to be saved the most.
I can get the numbers to convert the input works right dispalys in listbox just wont loop been at it for two weeks It only ask for store 1 values it displays it but it doesn't prompt for the rest of the stores values it should be 5 i tries for 1 to 5 at the top of the statement but that didn't work either.
private Sub btnDisplay_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplay.Click Dim strvalue As String Dim intcount, intsales As Integer [Code] .....
I am creating a form for work where managers can report when they find a customer's personal information laying around on a desk (we work at a call center where agents answer calls for a wireless cell phone provider, so we take personal information security very seriously). Anyway, I am wondering if there is a way to have a text box autofill with that manager's windows username (since they will need to be logged into their own profile to use the form).
I need something tje user can type in data to such a parts QTY cost etc. There are no predefined parts list so the user can enter any part name/Number and there is no limit to amount of parts that can be entered.
Does anyone have any idea what might be useful. It was thinks of a listview bu i can't see that you can type into that. I cant use comboboxs because there are no predefined list and i know there is some way to generate text at runtime (i think) but i don't know how to do it and i would prefer a clearer approach.
I have 10 buttons 0-9 And i have 4 textboxes All representing different values (n,e,x,y) Ok so what i want is to be able to use my 0-9 buttons to input the numbers into the boxes. However my problem is How can my program know which text box the mouse cursor is in. Right now, i can only get it to go in one of the boxes That i tell it too by using the textbox's name. Or all of them at once.
SO is there a way that when i click in text box "n" when i click numbers they will go there. Then if i click in text box "e" and click the the numbers, they will go in there?
i want to restrict input of a textbox to only numbers but am doing it on asp.net, so i cant check for each character that is being inputed cause it will cost me a post back and thus lots of time?
this up but this line below seem to be the problem this sentence (Textbox1.Checked) its supposed to add all the numbers up and give total in a input box under the score line is the complete code sorry for wrecking anyones head cause mine is demented
from mark Protected Sub TextBox1_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles yourtotal.TextChanged