Using Session State Dont Work Properly
Dec 8, 2010
i am still new to using session state, i want to convert page name into and integer according to a database table a function then compares "X" and "Y" to check if a user have the right to view this page..i know this is not the best way of managing website security, but it is like "training on how to use the session".[code]
View 1 Replies
ADVERTISEMENT
Jan 18, 2010
I have an uploadify control working fine in a vb.net web application - however whenever I switch on cookieless session state in web.config (cookieless="true") - it stops working. In my upload IHttpHandler I can see that the data stored by uploadify is nothing:
[Code]...
I'm guessing that the flash isn't honoring the session id in my url? how to keep uploadify working when I turn on cookieless session state?
View 1 Replies
Jul 8, 2009
I have formA.vb and I added some shortcut keys using the key_up event handler. Before coding the handler I change the keypreview property of the form to true. I added this code :
Private Sub IntRMA_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyUp
If e.KeyCode = Keys.ControlKey And e.KeyCode = Keys.C Then
[code].....
View 3 Replies
Feb 3, 2011
I'm looking for some smart ideas on how to quickly find all usage of session state within an existing asp.net (MVC) application.
The application in question was the subject of outsourced development, and has been running fine in production. But we recently realised that it's using InProc session state rather than (our preferred route) StateServer.
In a small scale test, we switched it over to StateServer, and all worked fine. However, when we deployed to production, we suddenly experienced a large number of errors. I'm not sure if these errors were caused by this change (they were actually complaining about database level problems), but removing the change allowed the application to function once again (this may have just been because it caused a recycle to occur).
So before I try switching it again, I'd like to perform a thorough audit of all objects being placed in the session (I'd previously taken a quick look at a couple of controllers, and they seemed fine). If I had full control over the code, this is the kind of place where I'd just comment out the class (to compile and find the various ways of reaching the session class), then comment out the accessors, hit compile, and visit each error. But I can't do that with built in .NET framework types.
I decided to try using Reflector. I've analyzed the "Used By" for each of the following:
System.Web.HttpSessionStateBase.set_Item(String, Object) : Void
System.Web.SessionState.HttpSessionState.set_Item(String, Object) : Void
System.Web.SessionState.HttpSessionState.set_Item(Int32, Object) : Void
[Code]....
View 2 Replies
Aug 12, 2009
Remembering session state in HttpWebRequest
View 2 Replies
Aug 12, 2009
Remembering session state in HttpWebRequest?
View 2 Replies
Feb 12, 2009
I have several sessions stored at one time, and i want to count a particular one:
i have session.contents("session1") and session.contents("session2")
but i only want to check if there is anything in session2...
I tried this:
If Session.Contents("session2") = "" Then
as in, if theres nothing in it, then do something. But... it says when there is nothing in session2, that theres no object reference, i want to do something like this:
session.contents("session2").count or something
View 1 Replies
Dec 13, 2009
Each time I create a program, if I don't change the CPU type to x86 in the Project Properties, Compile, Advanced Compile options, it doesn't work. For example, if I hit the drop down button on a combo box, there will be no data, but after switching to x86, there is data. How does changing the CPU type affect how others (such as when its being graded) view the program? If the program is not run on an x86 system, would it appear to not work then?
View 1 Replies
Jul 2, 2010
I have a Dynamic Data application to which I have added a class for extending EDM. Everything works great, but now I am trying to set an entity property value equal to a value in session state - and its not recognizing the Session command. I'm trying to do something like this:
audit.action_by = CStr(Session("person_name"))
I think this is because I do not have the class Inheriting Page, but if I do add Inherits Page it breaks other stuff. How can I have the class include the ability to utilize sessions directly without inheriting Page?
View 2 Replies
Jun 7, 2010
I'm trying to track down a problem on our test environment. Previously it was set to use InProc Session State Type, but I've added in the SQLServer type for one specific Web App. I did this because we use the SQLServer type in our production environment and I want our test env to match as closely as possible.
However, after changing it to SQLServer I do not get any errors when trying to store unserializable data in session like I would expect. It works just fine, even though I would think it shouldn't. I'm a relative newbie when it comes to configuring this, but from the various tutorials I googled, I thought I covered all the bases.I was wondering if there's any code snippets to verify which session state type an application is actively using.
View 1 Replies
Jun 8, 2011
I configured session state in web.config.<sessionState cookieless="AutoDetect" timeout="5" sqlConnectionString="....."/>Now, I want to know timeout and sqlConnectionString from code-behind.
View 1 Replies
Dec 21, 2011
I have a bit of strange behaviour in an asp.net web application that involves the session state being lost.
Process A user logs into the application and the session is set. They then fill out 1 field, and the application then does an AJAX POST to a .asmx web service. Within the web service, I am using a HttpWebRequest to grab data from another server.
This data is then output to the browser.A few more fields are then filled in, and the data is then again Post to the same web service via an AJAX POST.
[Code]...
View 2 Replies
Aug 20, 2009
I have 2 console apps projects in the same directory but different projects. There is some common code in the App_Code directory and a common app.config which gets build into seperate .exe.config files.One module (VScanDemonStarter) starts up and writes to one logger with its own appender going to a seperate file. It uses an process.start() to execute the other module (VScanDemon) in another command prompt hidden window.When I run VScanDemon by itself it puts entries into its log file. When I run VScanDemonStarter it puts entries into its (different) log file, the VScanDemon log file gets created, but no entries. I can see it is executing because some files get moved from one directory to another. Just no Log entries.
<root>
</root>
<appender name="LogFileAppender" type="log4net.Appender.RollingFileAppender" >
[code].....
View 1 Replies
Feb 14, 2011
Sub Authenticate()
Dim username As String
Dim password As String
[code].....
View 4 Replies
Mar 8, 2012
My VB app will not work properly on a Windows 7 64 bit PC.When I launched it on the Win7 PC it will open up OK but when I open a crystal report, the form page comes up ok but the report is missing.Then I get a pop up window asking me for a user name an PW:
[Code]...
View 9 Replies
Dec 12, 2010
But I am facing problem Incase of vb .net .I am not able to add Ocx Control what should I do,
View 3 Replies
Nov 9, 2008
I am using a backgroundworker to start ffmpeg and trying to use a progressbar.ProgressBar1.Value = e.ProgressPercentage does not seem to work probably because the way ffmpeg uses standard error to report progress. I think i could use the output text to do the trick. the output.Seems stream 0 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 29.92 (359/12) [code]
View 1 Replies
May 17, 2010
I need to check if a label starts with a certain text, but it wont work!Here is the code I have:
Dim str1 As String = Label1.Text
Dim value As String = "abc123"
If str1.StartsWith(value) Then
'do something
end if
May I also add that the label i'm checking (the text inside it) has no spaces, i don't know if that makes any difference.
View 5 Replies
Aug 17, 2009
I tried so many times to convert this to DO UNTIL LOOP unfortunately it does not work properly can you help me?
Heres: the code
CODE:
View 7 Replies
Oct 31, 2009
i've got a problem here whereby my ctype doesn't work.firstly, to replicate my case briefly, i've created an extension of control class
[code]...
father.getheight 'compiler writes: Panel class doesn't support getheight, but I've already converted it to a Control with CType!end sub of course if i dim father as Control it works perfectly, but in my case father may be other objects as well that aren't controls so I had to dim father as a general object, is there a fix so i could properly convert father into a Control object?
View 1 Replies
Dec 2, 2009
I'm using the IsBusy property to determine when a backgroundworker has completed. In the RunWorkerCompleted event I assing the result of the RunWorkerCompletedEventArgs to a public variable within the module where the backgroundworker events reside. The trouble is, the IsBusy property occasionally becomes true before the public variable gets assigned the value of the RunWorkerCompletedEventArgs. I experimented with putting a Threading.Thread.Sleep(10) after the IsBusy property becomes true and it seems to fix the problem. But it really doesn't seem right that I should have to do this. What is wrong here? I have placed the backgroundworker events in a component that is instantiated from the windows form, instead of placing the background worker events within the code of the form itself.
Here is my code;
Function SendAndWait(ByVal IntegerArray() As Integer) As String
Component.BackgroundWorker.CancelAsync()
Do While Component.BackgroundWorker.IsBusy
[code]....
View 1 Replies
Aug 19, 2009
I'm working through a programming project, which should be quite easy but im stuck right at the start (relatively new to VB). I have a textbox (named textbox1) and a checkbox next to it. I want the checkbox to be ticked (.checked) when ever the value in the textbox is between 1 and 100, the checkbox to not be ticked when theres nothing in there, and for it not to be ticked when the value is < 1 and > 100. Figured a case statement would be the easiest. (this piece of code is just a validation check, basically in the real thing the user would have to enter in a value between 1 and a given number, and need to tell the user if that value is valid).
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged
Select Case TextBox1.Text
Case Is = ""
[code]....
But what happens is, if I enter in the value 1 in the textbox, the checkbox becomes ticked, as it should. It tick with any values between 2 and 99 (any number not starting with 1) but the checkbox becomes ticked again when the value is 100. For any other range, say 1 to 70, the checkbox would be ticked if the value in the textbox is 1 to 7, or any number starting with 1 or 7, but not 8 or 9, or any number starting with 8 or 9.
View 3 Replies
Feb 23, 2012
I found a class that saves column order and column width for a list view but i cant get it to work properly.
Public Class cListviewHelper
Private Declare Function ListViewiColumnOrder Lib "user32" Alias "SendMessageA" (ByVal hwnd As Integer, ByVal Msg As Integer, ByVal wParam As Integer, ByRef lParam As Integer) As Integer[code].....
It saves the right number of columns but not in the order they are.It always saves them like this in the registry "0,1,2,3,4,5,6"
View 8 Replies
Aug 3, 2010
My project requires that a windows service checks up a table on a sql database(MDF) and if product existence is 0 then sends an email to some mail address and keep checking every 24 hrs.Now Im able to send mail messages but what Im not able is to make the service itself to work or at least make sure that is working.I do the following(correct me if I do something wrong or missing a step):
1. create a new project and choose windows service
2. add a timer and set to 4000 ms just to test not wait the 24 hrs lol
3. then open its event timer_elapsed and put some code on it, like a msgbox that would keep spamming every 4 secs just to test
4. at the event onstart I enable the timer by: timer1.enabled=true
5. at the event onstop I disable the timer by: timer1.enabled=false
6. right click then choose add installer
7. in the newer installed with the two objects:
a. serviceinstaller1 set its properties to: displayname: myservice and servicename: myservice
b. serviceprocessinstaller1 set account property to LocalSystem
8. build the project and install it by opening the VS console and type: "installutil c:path blah blahservice.exe" then hit enter
9. all successfull installed open the pc manager and run the service from the list and this should be the deal
Now my real problem is that by following those steps my service is sucessfully builded, installed, and started but after the 4 seconds no msg pops up so this leads me to think that is not doing anything or I did something wrong in the steps above. Is there another way to test if this service is working else than the msgbox or the log entry? Plus, Im working on my home pc which is a xp OS. I tried the same at college pcs wich are win7 and when I did install by the console it returned an error weird but in my home pc it doesnt(and I have to present my project at college at college and tomorrow
View 7 Replies
Feb 18, 2012
i just want to know how i can make this program run proberly. if you import a file in the listbox and you wanne start it whit the process.start methode it won't work. here is my code:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
OpenFileDialog1.ShowDialog()
[code]....
My question is how can i make the process.start work properly and will the program start the file?
View 4 Replies
Jan 30, 2012
I wrote a program which is editing data from database. I used few tutorials (I`m beginer) and everything is working fine(I can make changes in datagrid). but when I`m trying to save changes made in dataset(e.g. save added record) I can not to that (there are no changes in my access database, but inly in datagrid)what is interesting when I delete record - changes are saved and record is deleted from db. where is my mistake? what is wrong? maybe some tips what can I improve in this small program?
[Code]...
View 10 Replies
Dec 16, 2011
i add this values to listbox
6
7
15
6
[code]....
but in button function when i press the key is shows me this:
15
5
6
6
[code]....
code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
ListBox1.Sorted = True
End Sub
View 2 Replies
Mar 24, 2011
I'm having a problem with this code:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
clave = Request.QueryString("cve")
If clave = Nothing Then
[code].....
View 2 Replies
Mar 17, 2012
I have this xaml:
<Canvas Width="75" Height="75">
<Button x:Name="button" Background="Olive" Canvas.Left="0" Canvas.Top="0" Width="75" Height="75" Click="button_Click"/>
[code].....
View 1 Replies
Sep 6, 2005
I have a user control with an embeded DataGridView. I exposed the Columns property so that the columns collection could be edited in the visual designer:
View 2 Replies