Webbrowser Control On Form2 Vb Windows Application?
Dec 9, 2009
I have a vb windows application with 2 forms, where form2 is called from form1 using form2.showdialog()
I added a web browser control to form2, and I'm getting the following error at the point where form2 is called:
Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it.
I tried:
1) adding STAThread() to the form_load()
2) I added a module to my application, and created a sub main(), with the STAThread attribute applied to it
I am writing a windows form application, where I want to have a WebBrowser control, and in that control, I want to show a Google map programmatically generated (I mean, not just specify a URL to the browser).
i m a vb.6.0 developer and now turned in vb.net. so i m new in vb.net.My problem is given below.i opened the word documents in webbrowser control and it is just showing a document page with rular. But my main problem is that i want to open whole word documents with tool &menu bar in webcontrol. i used the following code which is given below.
WebBrowser1.Navigate("C:dharmchandBlank.doc")i wrote this code in form_load events and when i run my application then it is showing just a page with rular. But not showing Menu bar & Standard or Formatting toolbar.
I am trying to write a program that will tell my grandmother whether the internet is live or not. I know, I know, She just doesn't get it. So I want to create a program to load google.com or something and all I want the program to do is tell her whether the site was found or not. Is there a way to do this with the WebBrowser control?
I have a WebBrowser control in my VB.NET application that loads a PHP page inside it. On the PHP page I have a 'Log Out' hyperlink. What I'm trying to do is close the VB.NET form when that hyperlink is clicked.
I can't seem to find a way to use the IE9 rendering engine in the WebBrowser control, instead of the IE7 rendering engine, using Visual Studio 2010 and Windows Forms.
XP WEBBROWSER-CONTROL: brings up PDF embedded in webbrowser control, as desired.XP IE7: Behaves the same if you manually navigate to URL, as desired.VISTA WEBBROWSER-CONTROL: brings up PDF by separately launching Acrobat, won't embed in webbrowser control. Not desired.Vista IE7: embeds PDF properly if you navigate to same URL, as desired.I am using Acrobat 9, where there is a preference setting under Internet to bring up PDF embedded in browser -- works fine directly in IE7, but not in webbrowser control.
If you are interested, I am doing this because I do not like having to drag and drop my browser etc. I just right click the URL in Chrome and select (Play on My TV) a customized dropdown item, at which point my Player finds the TV, opens the URL, maximizes itself and plays the content
I have a VB.Net Windows Forms application that incorporates the WebBrowser object.I want to place the input focus/cursor in a textbox after successfully loading a PDF document in the WebBrowser via the Navigate method.I tried to set the focus (TextBox1.Focus) in the DocumentCompleted event handler, but that failed.Or, I should say that the focus does not stay in the textbox.It appears that all processing initiated by the Navigate method is not complete even when the DocumentCompleted event is fired.And, as a result, the input focus is being moved from the textbox for some reason.
I now set the input focus in the ProgressChanged event handler when the CurrentProgress and MaximumProgress event agruments both have values of zero.This is successful, but I want to be sure that I can rely on the values of the event arguments.After I use the Navigate method, the ProgressChanged event is fired 4 times with the following CurrentProgress and MaximumProgress event argument values: 0 of 10000, 10000 of 10000, 10000 of 10000 (again), and finally 0 of 0.Can I confidently rely on a ProgressChanged event at the absolute end of a successful WebBrowser navigation that has CurrentProgress and MaximumProgress both set to 0?
I have implemented webbrowser control in my windows application. I have some functions inthe class file. i want to use those functions from the webpage which is displayed in my windows app through webbrowser control..For example say... I have an standalone windows software. Which has a webbrowser control in the some form. Now i would like to create a webpage that can be displayed in the webbrowser control in win app which has some buttons and textboxes. When i click on button in the webpage it should get the version number of that software. I have some other functions that are in the class file aswell.. but dont no how to call those functions from that webpage when a button is clicked or something like that.
I'm developing an VB.NET application which utilizes a webbrowser control. The browser control needs to navigate to a simple page which prompts the user for their user name and password. However, this prompt is not simply a web form, but it is a completely new dialog window. I need a way to automate filling in the username and password in this dialog by using locally stored credentials, so that there is no interruption in the webbrowser control's navigation. The only information that I have been able find so far that might be useful in solving this problem, involves using windows hooks in the user32.dll to intercept and negotiate with these windows at a low level.
We have a VB.Net app that has several editable reports and forms in html/javascript. I'm using the standard WebBrowser control.We're accessing the content via filepath, since using localhostsharename when the machine is offline doesn't work even though the content is on the machine. The problem with that is that then it's running in the local machine zone, and you get the warning about running ActiveX controls (even if that's set to 'allow' in the options menu on IE). So I'm using Mark of the Web to act as if the content is saved from localhost. I appended it with the requisite vbCrLf to the start of the HTML page that's being dynamically written every time a link is clicked. When I open the resulting page in IE, I no longer get the ActiveX warning, and everything works. However, when I use WebBrowser.Navigate to that filepath, I still get the warning. Any idea how to get rid of that?
I currently have a simple VB.Net WebBrowser program uses webbrowser control, I 'd like to have certain data returned by a sever in the open web page send to the VB.net program, i.e. retrieve the html response from ASP.NET page.
i need to query a database a user's Full Name, when data is returned by the sever side script, it won't do any update on the web page, instead it should notify the VB.net program what users' full name is.
I made a simple application for a website, the site has a IRC-chat and the program should let you close the window (or actually minimize it to the system tray), and then open it from the tray.the problem that occurs, is that I keep getting a Script Error from IE:url...the weird part is that this does not happen when using Internet Explorer on it's own.so it only happens within the WebBrowser Control in the application I made.the application, also, couldn't be more simple, it had just a single window with only a webbrowser control that loads url..., further the program only has a Notification Icon and a Contextual MenuStrip for the Notification Icon.
I have a Visual Basic.Net Windows Forms application to which I am considering adding the WebBrowser control. I'm assuming that the PC's on which this application will ultimately be deployed/installed will have the latest Windows (XP, Vista, or 7) updates, a firewall, and an Internet security suite installed/running.
With this deployment environment in mind, does the WebBrowser control make my application or the deployment PC vulnerable to any significant security risks? Are there any programming issues that should be addressed to eliminate potential security risks when using the WebBrowser control?
I have the code which checks if there is a selected tab
Private Function GetBrowser() As WebBrowser If TabControl1.SelectedTab IsNot Nothing Then For Each c As Control In TabControl1.SelectedTab.Controls If TypeOf (c) Is WebBrowser Then Return c
I have a need to open 10+ Unix windows and run 5 or 6 commands on each window. I would like to set up a VB application with a menu so that I can select which Unix windows to open, and which commands each window needs to run. What VB 2008 commands (1)run otherapplications on the same PC; (2) set the focus to another window (3) allow a VB application to send acommand scriptthat will be used by the Unix window as if
The following screenshot was taken from a web based application developed using vb.net. Do we have similiar in windows application form? The program generates the rows from database and represent them in suitable controls such as combo box, text box or just label.
I created my user control for email validation in windows application(C# language).I am using it in the form, if the user leave that textbox it ll show message "E-Mail expected",if its correct value, then it ll be stored in another textbox. How can i retrieve values from the user control into textbox.
I am looking for a contol either listbox or listview to support my requirements. Basically how my application looks is:
[Code]....
Having said these things. I used to program in VC++6, VB6. But using those version now seems not realistic now as I lost touch. But if I have to use the latest 2008 versions, for which I do not have any experience seems scary. So, If you are reading this , and you have got some experience in these fields or using controls that support my requirement, can you please let me know which programming language or IDE and Control should I use to develop this application. PS: the image is made using mspaint and does not represent actual program.
I have a VB windows application and I need a way to control input output from this windows application to a batch file.The batch script is quite complex so converting to a VB console application is out of the question because it will too much time.An simplified example is this:I have this batch file test.bat(just for example)
@echo off set /p choice=name : %choice% echo Hello %choice%!
In this batch file the user input the name which is then stored in a variable and after the user press enter on the screen will appear Hello + user input.
1. Is it possible to enter the name in a textbox from the windows form and by pushing a send button pass the name to the batch application and then the batch file to continue the operation of displaying the Hello message?
2. After the batch file finishes the operations it will open another console windows (3) with status of the various operations that take place on the system(in my case connected users to a server)Is it possible to hide this child console windows that are generated after my main .bat application finished the operations of opening connections?Can this be done from the windows application or I need to modify the .bat script?
3. Is there a way to collect the console windows output in a textbox from the windows application?One idea that came to me was to redirect the console output to a textfile and then read the textfile in the VB application but I want to know if there is another way.
4. Is it possible to hide this batch file inside the windows application exe?
I have a VB windows application and I need a way to control input output from this windows application to a batch file.
The batch script is quite complex so converting to a VB console application is out of the question because it will too much time.[code]...
1. Is it possible to enter the name in a textbox from the windows form and by pushing a send button pass the name to the batch application and then the batch file to continue the operation of displaying the Hello message?
2. After the batch file finishes the operations it will open another console windows (3) with status of the various operations that take place on the system(in my case connected users to a server)
Is it possible to hide this child console windows that are generated after my main .bat application finished the operations of opening connections?
Can this be done from the windows application or I need to modify the .bat script?
3. Is there a way to collect the console windows output in a textbox from the windows application?
It's usual to see hoe to build a player with the AxWindowsMediaPlayer.
But in this occasion, I'm interested in control de Windows Media Player from Windows 7 with my own application.For example, I want to create a button that is able to pause or play the video that I'm watching with the WMP.
I have windows application in .net framework 4. I want to display PDF file in PDF Viewer Control. I tried to user AxInterop.AcroPDFLib.dll (provided by Adobe), but as my application runs on 64 bit, it gives exception at run time.
I was wondering if there was a function in user32 that could enable a hwnd control if it is disabled (grayed out) If I know the handle then can I do this? Also, if it is a menuitem, can it be done too?
What I'd like to do is position Form2 underneath the Label on Form1 when the "down arrow" button is clicked. (Basically Form2 should have the same "Left" as the Label on Form1, and its "Top" should be the Top of Label1 plus the Height of Label1.) Please see attached images for further clarification. (I did something like this in VB6 with the SetCursorPos API and the Screen.TwipsPerPixelX and Screen.TwipsPerPixelY properties, but I'm sure there is a better way to do this in .NET.)
I have tried to control another application to automate a process we do 100 times a day. It is simple enough, a few key strokes is all but I have been foiled in all attempts
