The problem I am having now is, the form size is exactly the size of my screen resolution. This makes the bottom scrollbar cover up by the taskbar. If the taskbar is hidden then it could solve the problem but I cannot set all PC to hide the taskbar
View 9 RepliesIf I disable the formborderstyle and set the WindowState to maximized it goes over the taskbar.how can I have to program to be maximized, but the taskbar remains?
View 3 RepliesWell, I develop a web browser called "Telecom". Instead of using a tabbed browser control, I use multiple forms for tab switching, and most of the tab switches look like
View 2 RepliesI'm doing a project in computer programing. I need to make a game so I made pong.everything is working fine, except when it loads it is often so low that you cant see the bottom paddle and i have to move the form up.is there a way that i can make the form automatically load already maximized, or load at a certain point in my screen?
View 3 RepliesWhen I tried to resize the form, the textboxes and buttons stayed on the top left. I would like to know if there is a way to make them stay in the center whenever the form is resized or maximized? I have tried using anchor but the buttons and textboxes ended up getting stretched.
ps: the area highlighted in green represents the size of the original form. Red arrow represents how I resized the form.
I am using VB Express Edition 2010, and I want a button, when clicked, to make the form 'full screen' (border style done and maximised window state) and once clicked again, to return the form to maximised but with a fixed single border style. Here is my
[Code]...
Anyone know how to make the program show over the taskbar?
View 3 RepliesHow am I able to make my form act like a taskbar. Cant move, all application on top of it, it will not overflow. Just like a taskbar 100%.
View 8 RepliesNote: I am working with Visual Studio 2010 Professional. Note: There are a lot of MDI Child posts, but none (that I have found) that apply to my scenario... Scenario I have an MDI form with a UserControl docked at the top. The UserControl is for navigation and is ~50 pixels in height. When I show a child form with its WindowState property already set to 'Maximized', the child form shows maximized in the MDI parent, but behind the UserControl.
[Code]...
I have a form in an application I'm working on that normally displays full screen without a taskbar but provide the option to switch to a minimizable window with a taskbar. When I switch from full screen without taskbar to minimizable window with taskbar everything is ok. When I try to switch back to full screen the border disappears but the taskbar is still there and the form is not aligned properly.The text at the top is cut off somewhat and there's a small margin at the right edge that shouldn't be there.I put this code in a keydown event for the form.
If Me.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None Then
Me.ControlBox = True
Me.FormBorderStyle = System.Windows.Forms.FormBorderStyle.Sizable[code]....
How do I get the taskbar to disappear and the form to display properly when I return to the full screen mode?
VS2008
I have an mdi form where the child forms need to maintain aspect ratio in normal state and have resize procedures that work well except with one form that appears to have a bug.
This form is the first child form opened, it is set as maximised in design and looks ok. If I then open another form on top, this maximised form, with a size of 1920x942, goes through my control resize code insisting it is in normal state and has a size of 1428x822. Obviously, when I close the other form the controls are wrongly resized/positioned.
I thought I might check the eventargs to test if the controlbox has actually been used and ignore otherwise but debug always reports that as empty. Lostfocus, deactivate etc don't trigger before resize so can't set a flag there.
why just this one form appears to be insane, or how I can distinguish between an intended resize and one just due to hiding by another form?
Has anyone had any luck with having different window states with multiple open child forms?for example if you have a single child form opened and say it is maximized.then open a second child form as normal, the first form will then be set to normal.all the open child forms will mimic the newly opened forms state.and i believe they will mimic when making some changes to one forms state.the others will follow.i have not had luck keeping this from happening in most situations.
View 19 Replieshaving different window states with multiple open child forms? for example if you have a single child form opened and say it is maximized. then open a second child form as normal, the first form will then be set to normal. all the open child forms will mimic the newly opened forms state. and i believe they will mimic when making some changes to one forms state. the others will follow.
View 3 RepliesI have a dual monitor setup on my computer. My program has multiple forms. I've designed the program to check which monitor the main form is currently on and to open the secondary forms on the current monitor. When the main form is on the primary monitor the secondary forms open as FormWindowState.Normal which is the design-time setting for the secondary forms. If the main form is on the secondary monitor and I click to open a secondary form then the secondary form is to be displayed as FormWindowState.Maximised.
[Code]...
So I moved the Form.Show line to after the Form.WindowState line. This works fine when the Form.Show process is very quick. The problem is that one of the secondary forms downloads some information from the internet so it takes about a second to finish the Form_Load process. When I had Form.Show first the form would not appear on screen until the Form_Load process is complete, so the delay was in the form appearing at all which is how I prefer it. With Form.Show last the form appears on screen immediately but appears mostly blank and unresponsive until the Form_Load process completes.
I would prefer that the form not appear at all until the Form_Load process is complete but I would like it to appear in an already Maximised state. Is this achieveable? It doesn't seem that complicated but I just can't figure it out.
Below is a short section of code from an application I am working on. What I am trying to do is to get a counter value to show when the application is minimized. When restored back to normal state, the name string is applied. It works, but it takes several minutes to change, and then never updates again. Not sure what the issue is.
[Code]...
I also tried a direct string conversion in the "elseif" part. No difference.
I need to store the Location, Size and WindowState of my application when it is closed, so that it can be re-opened in the same state later. I thought I could use simple coding and the Settings to achieve this, but I noticed the PropertyBinding of the Form in a tutorial and decided to see if I could use it.
[Code]...
I am developing a application where I have 1 parent from (windowstate of Parent from is set to Maximized) and 2 child forms. In my Parent form I have a menustrip with following code to activate child -
[Code]...
The problem is that icon on the Child Form appear in front of Menu strip control on MDI form when child form is maximised.
View 2 RepliesWell, in IE at the bottom right, the gray 5 fot looking things help you resize it down there, and stay there even after you maximize the window. When I make a form on VB and all, then maximize the window, it disappears on mine, but stays there every other time, except for while maximized, IE does it, so how do I make my program do it so it will stay there even when maximized? I have tried lengthy work-arounds and such, cause if its at correct size and location, and you maximize it stays, but I cant seem to find out when u maximize to over-ride it, so it'll work right.
View 1 RepliesMy program shows some browser. From a browser user can open maximized MDI form with some report. When user is closing the report, first MDI form with browser is became maximized.
2 forms have same MDI parent. Can I change this behavior to leave my first browser form without maximizing after second report closed?
I have a form which I want to keep maximized and all other forms to stay their original size. The problem that I am getting is when I open an additional form, it also maximizes even though I have set the form size to Normal. When I click on the Maximize button to put it back to the size it should be, the form that I want to keep maximized also reduces in size.
View 2 RepliesI have tried the following codes. The maximised window worked but the centralizing failed. How centralize a form in maximised window?[code]...
View 2 RepliesAfter maximizing a form, if I drag the title bar, the form moves out of position. This seems to be normal in windows, since IE does it also, but can I disable this? so the form stays fixed and unmovable?
View 1 RepliesI have a form showing a datagrid with info from a database. It also has 2 date pickers to filter the database results. It shows everything perfectly in the datagrid, so the db connection is ok. But it also has a few labels below, showing some info taken from the datagrid. For example, the datagrid has sales information and the labels below show the total sales. This works fine too.But the problem comes when I open some other form, maximize it and then open this form containing all this stuff (while the previous one is still open and maximized). These labels (along with a few more labels that only contain the '$' character) get on top
of the datagrid. Even if I restore the form to its normal size the labels are positioned wherever they want. The weird thing is that this only happens with some labels and not with all of them.My first guess was the anchor property, but I set it to left-bottom and it still does this.
how can i calibrate my form to be the same size in accordance to the screen size. So for instance if the original size of the form is 10cm by 10cm then when its maximized, how can i make the real size change automatically, because at the moment when i maximize the size of the buttons and labels etc. stay the same.
View 6 RepliesIs there a way to resize all component when the form is maximized?
View 1 RepliesCommonly if I maximized my form. It'll look like this And now, i just want to ask a simple question.. How to centered all those components if i maximized it??
View 1 RepliesIs there away to prevent an MDI child form from being auto maximized?
The problem I have is this. I have an mdi application that contains 2 mdi child forms. When I show the first form and maximize it so that it fills the mdi window I can't load the second form non maximized.
Vb.net automatically maximizes the second form despite the fact that I didn't tell it too! If I then restore the second form to its normal size it then does the same with the first form. This is all very strange to me. When you maximize one form inside an MDI window it maximizes them all.[code]...
I have a toolstrip on a winforms application and below it a DataGridView. Everything looks fine when the program runs initially. If I maximize the form though, the DataGridView covers part of the toolstrip. How can I make the toolstrip lock in place so that nothing will overlap it?
View 4 RepliesI set the anchors of the datagridview in order to automatically re size when the user maximises the windowsform. After setting this, Datagridview is resizing when user maximises, but the Column width is NOT. It is still showing same as before.
How to automatically increase or decrease the width of the columns when user maximises / Minimizes the widows