Im assuming this is because of the DPI of the png, but how do i correct this?the 72DPI is how it should look.. small and correct (its the time)the 300DPI is obviously a bit too big LOL
vb
Dim f As Font = New Font("Arial", 10, FontStyle.Bold)
Using sf As New StringFormat()
[code]....
So, what I've got is a picturebox and a textbox, I got some code to put text into a picturebox so I could better understand how it works, but what I don't understand is how to put the text on top of the image that is in the picturebox, can anyone tell me how to do that? Here's the code
[Code]...
I draw text (comment on item in an invoice ) inside a rectangle.
[Code]...
I have no problem, the text appear on several lines and it is well wrapped. But if the text is too long to be drawn inside the rectangle, I need to draw the text not drawn in another rectangle (on another page). How can I know the text not drawn in the first rectangle ? I think it is more difficult to use MeasureString because the text is wrapped.
What is the size difference between desktop and screen size?
I've been developing an application, which consists of a bar to the bottom of the screen that I want to keep allways visible .
When i open a window and maximize it, it do not stay behind the bar but only to maximize the top of the bar!
In the code below if I remove the FillRectangle line the text quality is not good. Why?
View 4 RepliesI am using drawstring with the DrawMode set to OwnerDrawFixed on a tab control. The Tabs have a alignment set to left, but the text is displayed in a horizontal orientation. I would like to change the orientation to vertical. I am expecting this to be simple, but can not seem to find the correct input parameters for drawstring.
View 6 Repliesi am using the DrawString Method to insert a Text on an Image. But i am not able to center it on the image. How could i do that? Thats my code:
Dim g As Graphics = Graphics.FromImage(destBitmap)
g.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic
g.PixelOffsetMode = Drawing2D.PixelOffsetMode.HighQuality
[code]....
I am using the e.graphics.drawstring to print labels and textboxes. One of the labels is "#". Whenever I print, although it is centered in its label on the screen, the text in the label aligns to the left. Is there a way to get it to center? This is happening with all my textboxes and labels.
e.Graphics.DrawString(lblNumber.Text, lblNumber.Font, Brushes.Black, 9, 55)
how to use DrawString (or any other method) to draw text that's reversed? For example, instead of having black text over a background image, you draw a black filled rectangle over the image, and then use DrawString to "punch through" the black rectangle exposing the image underneath.
View 3 RepliesI have a routine that creates a report which includes text and graphics. When I print to a PDF or printer the output looks great. When I draw the report on an image to save as a PNG, GIF, JPEG, etc. it does not look as good and I understand that is related to the 96 dpi native resolution. However, I made some modifications, and even though the graphics part of the image looks better, the text does not look as good as the PDF. I am creating the image using 300 dpi and text rendering is set at the highest quality.
[Code]...
I have this code where I'm wanting to draw text inside a defined rectangle and if it's too wide I want it to be slit onto multiple lines and if it's too tall, I was it to only paint what it can which right now it's not cutting it off it continues on below the bottom border. Here's my
Dim NotesRect As New RectangleF(mMargins.Left + LeftIndent, m_PagePositionSingle, mMargins.Right, mMargins.Bottom)
e.Graphics.DrawString(NotesString, m_ItemFont, Brushes.Black, NotesRect, New StringFormat(StringFormatFlags.FitBlackBox Or StringFormatFlags.LineLimit))
I'm making a class to basically print the screen. I'm going through each field and doing a drawstring, but things aren't lining up correctly. I tracked the problem down and don't know why it's happening.Take this line of code as an example:
Me.CreateGraphics.DrawString(Label1.Text, Label1.Font, Brushes.Black, Label1.Left, Label1.Top + 30)
This should draw the same text that is in label1 directly below label1 on the form. However, the drawn text is a different length than the label's text. Courier draws shorter, Sans Serif draws longer. It's doing the same thing going to a print document; it isn't matching how the label is being rendered.
So i have this code that changes the size and the font of the text but my problem is that how can i make the font and the size of the font to return back to default after it runs this code.
ListView1.Items.Add("Found Files In C: ")
My code
Dim Font As Font
Font = ListView1.Font
ListView1.Font = New Font(Font.Name, 32, FontStyle.Bold)
[Code].....
1.Firstly i am using a web browser control and i wish to get the URL of the current page and write it to a text box and to a text file.
2.I would also like to read the text file back and make some sort of bookmarking menu but dont really know where to start.
3.Is it possible to shrink the text size on a webpage through the browser control some sites the text looks huge.
Im trying to resize a picturebox dynamically using .size.height and .size.width Its not working. This is the error message: "Expression is a value and therefore cannot be the target of an assignment." Never used height and width before. Been trying to find the answer, but it seems beyond me. Im sure its easy. Anyone know whats wrong with this?
[Code]...
I have wondered the solution to this question for many years! I doubt if anyone else knows much about it because the internet is absolutely zero help in this!
I have made a form1 with a webbrowser control on it. When the program is run it brings up the homepage (which is Google). However the homepage doesn't seem to fit inside the webbrowser control.
So I am hoping that someone could tell me how to make the (...I dunno how to ask this retarded question...) webpage fit completely (100%) inside the size of the webbrowser control. Meaning...I would like to see the entire webpage from the internet in the
size of the webbrowser control. To fill the entire size (whatever size I want).
Etc... if my webbrowser ontrol is seh, set to 600px by 400px, how can I program this so when it brings up the homepage (or any other page), it fills the entire size of the webbrowser control? Without any scrollbars. How to make the contents from the web
(or local) fill the size of the webbrowser - almost like a mini browser if you will.
I developed a form application on my computer, but when it was used in another computer with different screen size, i was told the form didn't fit. Do I have to adjust the form size or any other ways to let the form compatible on different screen size? (could be different screen size or wide screen)
View 2 RepliesSo that's how I want it:
If I re-size the form, the textbox inside should be re-sized to fit the form, NOT DOCK!
I have a rich text box that have a paragraph in it (the parragraph may change). The user is able to decide what type and/or size of font he whishes to view the text in. My problem is that not more that an average of four words per line should be displayed per line. My idea was to size the rtb so that it automatically wrap the text to and average of 4 words per line. This I would do by determining the average width of a word (number of characters) in the paragraph, multiplying it by the width in pixels or twips of a character and then multiplying by 4 to get the average required length of a line. It does not need to be exact as long as I can get as close as possible to 4 words per line. Sample text:
My Father walks to the market every day to buy fresh bread and milk for the house.
Result expected:
My Father walks to the market every day to buy fresh bread and milk for the house.
Notice some lines may be slightly longer as long as the average is 4 words per line.My problem is that I dont know how to determine the width of a character in order to ultimately determine the width of a sentence.
I have a normal textbox which multiline property is set to true and now I need the text written in the textbox should have a large font size.So is it possible with the normal textbox.[code]...
View 1 RepliesTime difference between six text boxes
View 3 RepliesI have two date time pickers , namely "Date_of_ReturnDateTimePicker" and "Date_of_IssueDateTimePicker". Now, what i want to do is, that when i press the "total" button, the value of issue date should be deducted from the return date value, and the difference in days should be put in a textbox.
View 2 RepliesNow all went well about from using the structure correctly. The working of the structure was perfect. How ever i missed Two important issues. The structure needed a fixed size of 10 items (9 in programming terms starting from 0) And also out of the 5 items allowed to be chosen as one of the member types for the structure a limit of 5 items of that particular type.
[Code]...
I'm using graphic.DrawString to well... draw a string.I specify the Font Family, Font Size, Font Style, Graphics Unit.Everything works well for 50 computers but for just one, the font is "bolder".The characters are the same height but for some reason the "pixel" are double the width.Can this be fixed with code?Can this be fixed using a windows setting?
View 2 Replieswhats the difference between vb9 and c#? and when to use vb9 or c#. i haven't use c# to make a program but i tried to create one application in vs2008 and i found out it is almost the same with vb. how do they differ?
View 2 RepliesAt the top of my code I have:
imports system.drawing.graphics
but when I try to use it, no DrawImage or DrawString methods are available. I can get DrawImageAbort rather ironically.[code]...
I have this code where I'm wanting to draw text inside a defined rectangle and if it's too wide I want it to be slit onto multiple lines and if it's too tall, I was it to only paint what it can which right now it's not cutting it off it continues on below the bottom border.Here's my
Dim NotesRect As New RectangleF(mMargins.Left + LeftIndent, m_PagePositionSingle, mMargins.Right, mMargins.Bottom)
e.Graphics.DrawString(NotesString, m_ItemFont, Brushes.Black, NotesRect, New
[code].....
e.Graphics.DrawString(drawString, drawFont, drawBrush, _x, y)
Can I make only X in the center ?
I want to draw a string like WWW with 3 different colors. If i use e.Graphics.DrawString("WWW", RichTextBox1.Font, Brushes.Green, 150, 150) it will print in a color but i want to print in 3 different colors.
View 4 RepliesI'm confused on this because this works fine in VS 2008 on winXP sp2/sp3 but in VS 2008 on Vista sp1/sp2 I'm getting an Invalid Parameter exception on this line:
e.Graphics.DrawString(aColor.Name, Me.Font, br, e.Bounds.Height + 5I, ((e.Bounds.Height - Me.Font.Height) 2I) + e.Bounds.Top)
Here' the whole sub:
[code].....
