i face a problem while i practice the question in my text book, it require us to key in 4 digit of number and split it into 4 digit and encrypt it. Below is my coding [code] Console.WriteLine("The encrypted number is: " & encrypNumber3 & encrypNumber2 & encrypNumber1 & encrypNumber4)But its got error after i key in the 4 number.
View 2 Replies
How do you check if the division of two integers is a whole number, just answer with code, no links?
View 6 Repliesi have a division of 2 integer that give me a result as2,3944534 ...how i can give e result as
View 3 RepliesWhat's the difference between / and for division in vb.net? My code gives very different answers depending on which I use. I've seen both before, but never knew the difference.
View 3 RepliesI am using oledbconnection object with access database engine 64 bit to get data from Excel file. While using sqlconnection object if sql string has these statements "SET ARITHABORT OFF;SET ANSI_WARNINGS OFF;" , then division by zero exception doesn't cause any problem. But while using oledbconnection these statements cause error. My code samples are below:
Dim PbpConn As OleDbConnection = New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;" & _
"Data Source=C:BuzBeatDataPBPData.xls" & ";" & _
[Code]....
When SUM(pbA) has value "0" then it causes error and can't get data. is there a way to close the warnings and division by zero exceptions?
I've got a problem approximating the result of a division that should give a sharp result:
I use this code:
pListPrice *= 100 / (100 + VATPercentage)
where VATPercentage = 20D is declared as Decimal type. pListPrice = 25.2D is declared Decimal too.
The result should be: 21.00 sharp!
Instead I get 20.99999999999999999999D
I have a group of 25 labels named Label1, Label2, Label3, ... Label25 in a square of 5 per row, 5 per column and I wanted to assign the backcolor to all of them on a loop and assign a value of "True" or "False" to a matrix of 25 boolean values representing them.
But I was getting errors on the pattern created.
My approach was to use a substring containing a number copied from the label names:
Num = Val(sender.name.substring(5))
And the subindexes of the matrix:
p = (Num - 1) / 5
q = (Num - 1) Mod 5
The values for the lower corner of the matrix were rouded to 5 instead of being 4. Instead of (4,0) ,(4,1), (4,2), (4,3) (4,4) I was getting (5,0),(5,1)...(5,5)
So I solved the problem by creating two single variables "A" and "B", doing the divission and MOD operations on them, finding the floor of them and then converting to integer:
Private Sub Label1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles _
Label1.Click, Label2.Click, Label3.Click, Label4.Click, Label5.Click, _
[Code]......
Deviding an int by zero, will throw an exception, but a float won't - at least in Java. Why a float have an additional NaN info, while int haven't?
View 6 Repliesi have got a value in time span lets say: tsp1= 2 hour 5 minuts i have a another time span variable which contains value like: tsp2= 0 hours , 2 minuts?how can i divide tsp1 by tsp2 so than i can get exact number of times tsp2 divied the tsp1 and how much value is remaining.i am using vs2008?
View 3 RepliesIn the following linq query I have a division by zero exception wich I can't seem to code around. It occurs when the Sum of fldDevider returns 0.[code]...
How can I Make sure the ValuePerMonth field is 0 when the Group.Sum(Function(dr) CDec(dr.Field(Of String)(fldDevider))) function returns a 0. Or how do I return a 1 for Sum fldDevider if it is actually 0.
I have hit a block and not sure the best way to go with this. Looking for resources to find more on the subject
View 1 RepliesThis exercise says :"Write a program that inputs one number consisting of five digits from the user, separates the number into its individual digits and prints the digits separated from one another by three spaces each. For example, if the user types the number 42339, the program should print
4 2 3 3 9 Use the command window for input and output. [Hint: This exercise is possible with the techniques discussed in this chapter. You will need to use both division and modulous operations go "pick off" each digit.]"
Here is what I have learned in Chapter 3:
�If/Then Statements
�Console.Write()
�Console.WriteLine()
[Code]....
This exercise I have yet to start, and don't think I will be able to do much, because I have no clue how to "Pick off" the numbers using division and modulous operators. I know what the mod operator does, but I do not know how to use it and division to do what this exercise is asking me to do.
i'm just a begginer in using visual basic. i'm trying to add, subtract, multiply and divide two numbers. here is my code;[code]an error is occuring when i'm not putting any number on the textbox. now for the problem when i put a number to textbox1, and 0 to textbox2, there is also an error. It's because we can't divide a number to zero.
View 12 RepliesI am trying to load a small decimal number (eg 0.0566897 from a dataset field in to a variable (double), divide it by 2 and place it back in the dataset. After the divison, the variable is 0.0 and the rest of the decimal places are gone. How can I avoid losing the decimal places?
Dim dblCostps As Double = "0.0000000"
dblCostps = todds.Tables("todinfo").Rows(1).Item("cost_per_second")
dblCostps = dblCostps \ 2
todds.Tables("todinfo").Rows(1).Item("cost_per_second") = dblCostps
I've inherited a Visual Studio/VB.Net numerical simulation project that has a likely inefficient calculation. Profiling indicates that the function is called a lot (1 million times plus) and spends about 50% of the overall calculation within this function. Here is the problematic portion
Result = (A * (E ^ C)) / (D ^ C * B) (where A-C are local double variables and D & E global double variables)
Result is then compared to a threshold which might have additional improvements as well, but I'll leave them another day
Simple Calculator multiplication and division Trying to make a simple calculator. My program inputs numbers and arithmetic operations thru commandbuttons. The numbers, num(n-+1), are odd and the operations, op(n), are even. The code is based on the even op string. Every time a op occurs it is stored in numop(n) to be accessed later. I have all the other operations in sequential order: "*"," "/, "+" and "-". The other similar For-Next loop are the same just interchange the two * for /, +and -. The "+" and "-" work fine in this configuration.
My problem is the multiplication and division does not occur. The numbers and operations line up. The numop(m)=g*h should yield numop(m)=num(1)*num(3). Is there some sort of code to be inserted to accomplish these multiplication and division operations?
[Code]...
I have a text box filled with lines of names. What I would like to do is divide the text box into 3 different data grids using two different methods (one button for each)Method one: divide the test box by line number into 3 different data grids e.g. lines 1, 4, 7, & 10 go to datagrid1, lines 2, 5, 8 & 11 go to datagrid2 & lines 3, 6, 9 & 12 go to datagrid3.Method two: divides the group into 3 groups based on top 33% go to datagrid1, middle 33% go to datagrid2 and the the remaining 34% (bottom) go to datagrid3.The number of lines in the text box should never exceed 50 but best left not limited just in case.
View 6 RepliesWhen trying to divide the following, I get an overflow error:SAA_EM_DM(i, 1) = SAA(i, 1) / SAA_EQ_FI(i, 1)
All arrays are defined as Double
coding a shipping application where it adds .75 for every 100.00 dollars it would look something like this
0.00 to 100.00 = .75
100.01 to 200.00 = 1.50
200.01 to 300.00 = 2.25
300.01 to 400.00 = 3.00
and so on where the equaled value goes up .75 everytime i think i could use integer division and/or modulus
How do you get the remainder of the division of two integers.
View 3 RepliesIf you create new projects in C# and VB.NET, then go directly in the Immediate Window and type this:
? 567 / 1000
C# will return 0, while VB.NET will return 0.567.To get the same result in C#, you need to type
? 567 / 1000.0
Why is there this difference? Why does C# require the explicit decimal point after 1000?
How do I change / convert the result of the division or multiplication examples of the division = 200,1247 becomes 200,12 (2 decimal) I use this coding corrected my code is
[Code]...
When running the following, the code wants to return a value of 5 dollars, 3 quarters, 0 dimes, 1 nickle and 3 pennies when change due is 4.78.
'calculate amount of dollars, quarters, dimes, nickles, and pennies.
Double.TryParse(txtDollars.Text, dblDollars)
Double.TryParse(txtQuarters.Text, dblQuarters)
Double.TryParse(txtDimes.Text, dblDimes)
[Code].....
I am doing a bar cash register and I want to use a if statement to see if fosters button and number 1 on the number pad are both pressed then multiply constant by quantity number
View 1 RepliesI have 7 company Divisions that sit in an access database.I then use this list to populate two comboboxes in my windows form.However I get a syntax error in my SQL Query if the Division name is more than one word.For example in my access database I have two columns one is a status column and the other is a division column. If for example the Division is called 'Corporate' the status column is called 'Status Corporate' and the division column is called 'Corporate'.The SQL query works fine in this scenario.However if I have a Division that is more than one word, lets say 'Operations Division' I get an error in my SQL Query that says -
Quote: Syntax error (missing operator) in query expression 'Operations Division'.Here is my code
sqlNewTenderDetails = "SELECT " & Me.DivisionBox.SelectedValue & " From BidRefCodes Where " & "[Status " & Me.DivisionBox.SelectedValue & "='Active'"
daNewTenderDetails = New OleDb.OleDbDataAdapter(sqlNewTenderDetails, NewTenderDetailsTableCon)[code]....
what is the actual use of Integer Divisor operator "" in vb.net ?
View 4 RepliesI am a VB programmer. Recently I noticed that my visual studio is not breaking or alerting me on runtime errors such as "file not found", "division by zero", "database connection error" etc. I want the error display and breaking on..
View 3 Replieshow to get the product using "+"(addition) and division using "-"(subtraction) and get it's remainder without using modulo division.
dim ctr as integer
for ctr=a to b
ctr=a+a
next ctr
I have a problem with a sql query. Through the query I am trying to search database for any occurrences of string (can be anything) in a column using the SQL LIKE command. The problem is that it works fine for most of the strings say john, jim, ji"m , but does not work when i include the following characters which are ( ' , { , } , and a single quotation mark). MYSQL query takes care of these special cases by putting them in [] block whenever user enters them .But i am getting the following error when i go to query the database using the GetSelectCommand() in VB.NET
Exception Details: System.ApplicationException: Number of values provided must be equal to the number of placeholders in query.I have checked the query over and over again .. but its fine .My database server is Sql Server 2008.So my application throws the exception in this command:
Using reader As MustDisposeDataReader = _
pmSystem.DatabaseManager.GetSelectCommand(selectStatementBuilder.ToString(), New Object() {})
Where MustDisposeDataReader is an instance of a class in an internally developed library, which inherits from System.Object. pmSystem is an instance of the class PlanManagerSystem which implements the commandlayer. GetSelectCommand() takes the select command
I got most part correctly but the only part isnt working right is when the last 5th digit match the sum number at the last number.
Private Sub btnVerify_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnVerify.Click
Dim strCardNum As String
Dim strSumNum As String
[CODE]...
