I've got a problem approximating the result of a division that should give a sharp result:
I use this code:
pListPrice *= 100 / (100 + VATPercentage)
where VATPercentage = 20D is declared as Decimal type. pListPrice = 25.2D is declared Decimal too.
The result should be: 21.00 sharp!
Instead I get 20.99999999999999999999D
i have a division of 2 integer that give me a result as2,3944534 ...how i can give e result as
View 3 RepliesHow do I change / convert the result of the division or multiplication examples of the division = 200,1247 becomes 200,12 (2 decimal) I use this coding corrected my code is
[Code]...
I am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesI am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
What's the difference between / and for division in vb.net? My code gives very different answers depending on which I use. I've seen both before, but never knew the difference.
View 3 RepliesI am using oledbconnection object with access database engine 64 bit to get data from Excel file. While using sqlconnection object if sql string has these statements "SET ARITHABORT OFF;SET ANSI_WARNINGS OFF;" , then division by zero exception doesn't cause any problem. But while using oledbconnection these statements cause error. My code samples are below:
Dim PbpConn As OleDbConnection = New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;" & _
"Data Source=C:BuzBeatDataPBPData.xls" & ";" & _
[Code]....
When SUM(pbA) has value "0" then it causes error and can't get data. is there a way to close the warnings and division by zero exceptions?
i face a problem while i practice the question in my text book, it require us to key in 4 digit of number and split it into 4 digit and encrypt it. Below is my coding [code] Console.WriteLine("The encrypted number is: " & encrypNumber3 & encrypNumber2 & encrypNumber1 & encrypNumber4)But its got error after i key in the 4 number.
View 2 RepliesI have a group of 25 labels named Label1, Label2, Label3, ... Label25 in a square of 5 per row, 5 per column and I wanted to assign the backcolor to all of them on a loop and assign a value of "True" or "False" to a matrix of 25 boolean values representing them.
But I was getting errors on the pattern created.
My approach was to use a substring containing a number copied from the label names:
Num = Val(sender.name.substring(5))
And the subindexes of the matrix:
p = (Num - 1) / 5
q = (Num - 1) Mod 5
The values for the lower corner of the matrix were rouded to 5 instead of being 4. Instead of (4,0) ,(4,1), (4,2), (4,3) (4,4) I was getting (5,0),(5,1)...(5,5)
So I solved the problem by creating two single variables "A" and "B", doing the divission and MOD operations on them, finding the floor of them and then converting to integer:
Private Sub Label1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles _
Label1.Click, Label2.Click, Label3.Click, Label4.Click, Label5.Click, _
[Code]......
Deviding an int by zero, will throw an exception, but a float won't - at least in Java. Why a float have an additional NaN info, while int haven't?
View 6 Repliesi have got a value in time span lets say: tsp1= 2 hour 5 minuts i have a another time span variable which contains value like: tsp2= 0 hours , 2 minuts?how can i divide tsp1 by tsp2 so than i can get exact number of times tsp2 divied the tsp1 and how much value is remaining.i am using vs2008?
View 3 RepliesIn the following linq query I have a division by zero exception wich I can't seem to code around. It occurs when the Sum of fldDevider returns 0.[code]...
How can I Make sure the ValuePerMonth field is 0 when the Group.Sum(Function(dr) CDec(dr.Field(Of String)(fldDevider))) function returns a 0. Or how do I return a 1 for Sum fldDevider if it is actually 0.
I have hit a block and not sure the best way to go with this. Looking for resources to find more on the subject
View 1 RepliesThis exercise says :"Write a program that inputs one number consisting of five digits from the user, separates the number into its individual digits and prints the digits separated from one another by three spaces each. For example, if the user types the number 42339, the program should print
4 2 3 3 9 Use the command window for input and output. [Hint: This exercise is possible with the techniques discussed in this chapter. You will need to use both division and modulous operations go "pick off" each digit.]"
Here is what I have learned in Chapter 3:
�If/Then Statements
�Console.Write()
�Console.WriteLine()
[Code]....
This exercise I have yet to start, and don't think I will be able to do much, because I have no clue how to "Pick off" the numbers using division and modulous operators. I know what the mod operator does, but I do not know how to use it and division to do what this exercise is asking me to do.
How do you check if the division of two integers is a whole number, just answer with code, no links?
View 6 Repliesi'm just a begginer in using visual basic. i'm trying to add, subtract, multiply and divide two numbers. here is my code;[code]an error is occuring when i'm not putting any number on the textbox. now for the problem when i put a number to textbox1, and 0 to textbox2, there is also an error. It's because we can't divide a number to zero.
View 12 RepliesI am trying to load a small decimal number (eg 0.0566897 from a dataset field in to a variable (double), divide it by 2 and place it back in the dataset. After the divison, the variable is 0.0 and the rest of the decimal places are gone. How can I avoid losing the decimal places?
Dim dblCostps As Double = "0.0000000"
dblCostps = todds.Tables("todinfo").Rows(1).Item("cost_per_second")
dblCostps = dblCostps \ 2
todds.Tables("todinfo").Rows(1).Item("cost_per_second") = dblCostps
I've inherited a Visual Studio/VB.Net numerical simulation project that has a likely inefficient calculation. Profiling indicates that the function is called a lot (1 million times plus) and spends about 50% of the overall calculation within this function. Here is the problematic portion
Result = (A * (E ^ C)) / (D ^ C * B) (where A-C are local double variables and D & E global double variables)
Result is then compared to a threshold which might have additional improvements as well, but I'll leave them another day
Simple Calculator multiplication and division Trying to make a simple calculator. My program inputs numbers and arithmetic operations thru commandbuttons. The numbers, num(n-+1), are odd and the operations, op(n), are even. The code is based on the even op string. Every time a op occurs it is stored in numop(n) to be accessed later. I have all the other operations in sequential order: "*"," "/, "+" and "-". The other similar For-Next loop are the same just interchange the two * for /, +and -. The "+" and "-" work fine in this configuration.
My problem is the multiplication and division does not occur. The numbers and operations line up. The numop(m)=g*h should yield numop(m)=num(1)*num(3). Is there some sort of code to be inserted to accomplish these multiplication and division operations?
[Code]...
I have a text box filled with lines of names. What I would like to do is divide the text box into 3 different data grids using two different methods (one button for each)Method one: divide the test box by line number into 3 different data grids e.g. lines 1, 4, 7, & 10 go to datagrid1, lines 2, 5, 8 & 11 go to datagrid2 & lines 3, 6, 9 & 12 go to datagrid3.Method two: divides the group into 3 groups based on top 33% go to datagrid1, middle 33% go to datagrid2 and the the remaining 34% (bottom) go to datagrid3.The number of lines in the text box should never exceed 50 but best left not limited just in case.
View 6 RepliesWhen trying to divide the following, I get an overflow error:SAA_EM_DM(i, 1) = SAA(i, 1) / SAA_EQ_FI(i, 1)
All arrays are defined as Double
coding a shipping application where it adds .75 for every 100.00 dollars it would look something like this
0.00 to 100.00 = .75
100.01 to 200.00 = 1.50
200.01 to 300.00 = 2.25
300.01 to 400.00 = 3.00
and so on where the equaled value goes up .75 everytime i think i could use integer division and/or modulus
How do you get the remainder of the division of two integers.
View 3 RepliesIf you create new projects in C# and VB.NET, then go directly in the Immediate Window and type this:
? 567 / 1000
C# will return 0, while VB.NET will return 0.567.To get the same result in C#, you need to type
? 567 / 1000.0
Why is there this difference? Why does C# require the explicit decimal point after 1000?
I just read about DataSet in VB.NET, it uses disconnected concept. My question is: if my apps has "List All" button that query data from 1 table in the database, and that table has "very very very" many rows, so my DataSet will be filled with those data and eat up memory. Can I limit the data that being put to the DataSet from that query? But I want to be able to retrieve the next data from the same query if the user want to see it?
For example:
I have 1000 rows in my database, and i query all of them. But I just want 200 rows being inserted to my DataSet, but if the user want to see rows number 201 and so on, I want to be able to retrieve the next 200 rows, and so on. So it just like cutting those data into a group of 200 rows. Can I do this with the concept of "disconnected" of the DataSet?
When running the following, the code wants to return a value of 5 dollars, 3 quarters, 0 dimes, 1 nickle and 3 pennies when change due is 4.78.
'calculate amount of dollars, quarters, dimes, nickles, and pennies.
Double.TryParse(txtDollars.Text, dblDollars)
Double.TryParse(txtQuarters.Text, dblQuarters)
Double.TryParse(txtDimes.Text, dblDimes)
[Code].....
I have set up a method in vb.net and in xcode for encrypting a string using as far as i can tell the same parameters for an AES encryption.I've looked all over the place but cannot find information on whether they use the same encryption algorithm and settings.
this is the vb.net code:
Dim encryptAES As New AesCryptoServiceProvider()
Dim encoding As New UTF8Encoding()
Dim encryptor As ICryptoTransform
encryptAES.Key = encoding.GetBytes("12345678901234567890123456789032")
encryptAES.IV = encoding.GetBytes("1234567890123416")
encryptAES.Mode = CipherMode.CBC
[Code]...
I have 7 company Divisions that sit in an access database.I then use this list to populate two comboboxes in my windows form.However I get a syntax error in my SQL Query if the Division name is more than one word.For example in my access database I have two columns one is a status column and the other is a division column. If for example the Division is called 'Corporate' the status column is called 'Status Corporate' and the division column is called 'Corporate'.The SQL query works fine in this scenario.However if I have a Division that is more than one word, lets say 'Operations Division' I get an error in my SQL Query that says -
Quote: Syntax error (missing operator) in query expression 'Operations Division'.Here is my code
sqlNewTenderDetails = "SELECT " & Me.DivisionBox.SelectedValue & " From BidRefCodes Where " & "[Status " & Me.DivisionBox.SelectedValue & "='Active'"
daNewTenderDetails = New OleDb.OleDbDataAdapter(sqlNewTenderDetails, NewTenderDetailsTableCon)[code]....
what is the actual use of Integer Divisor operator "" in vb.net ?
View 4 Replies