How do I change / convert the result of the division or multiplication examples of the division = 200,1247 becomes 200,12 (2 decimal) I use this coding corrected my code is
[Code]...
Simple Calculator multiplication and division Trying to make a simple calculator. My program inputs numbers and arithmetic operations thru commandbuttons. The numbers, num(n-+1), are odd and the operations, op(n), are even. The code is based on the even op string. Every time a op occurs it is stored in numop(n) to be accessed later. I have all the other operations in sequential order: "*"," "/, "+" and "-". The other similar For-Next loop are the same just interchange the two * for /, +and -. The "+" and "-" work fine in this configuration.
My problem is the multiplication and division does not occur. The numbers and operations line up. The numop(m)=g*h should yield numop(m)=num(1)*num(3). Is there some sort of code to be inserted to accomplish these multiplication and division operations?
[Code]...
I've got a problem approximating the result of a division that should give a sharp result:
I use this code:
pListPrice *= 100 / (100 + VATPercentage)
where VATPercentage = 20D is declared as Decimal type. pListPrice = 25.2D is declared Decimal too.
The result should be: 21.00 sharp!
Instead I get 20.99999999999999999999D
i have a division of 2 integer that give me a result as2,3944534 ...how i can give e result as
View 3 RepliesHow do I convert the query result into Array so i won't have to use the sqlResults.Item("xxxx") ?
View 22 RepliesIs there anyone here, can share some tutorial or ways to convert search result which is in xml format to html view which is more easier to view compare to xml view.
View 2 RepliesI have a form with 10 textbox's showing my computer information and textbox5 shows a number 123456789 of bites on my hard drive how can i change this number 123456789 to gigabites i want the result to look like (100GB)
View 1 RepliesIm trying to change the information on each row depending on the result from the query. Im thinking that at the minute my problem is that I'm only returning the first result from the query into the result.
e.g. query returns row 1 with '1232' row 2 '1243' but result is only ever set to '1232'
I have this code:
Private Sub EditPage_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load'TODO: This line of code loads data into the 'InventorySysDataSet.tb_master_products' table. You can move, or remove it, as needed.
Me.Tb_master_productsTableAdapter.Fill(Me.InventorySysDataSet.tb_master_products)
sqlCnn = New SqlConnection("Data Source=ZEREYSQLEXPRESS2008;Initial Catalog=InventorySys;Integrated Security=SSPI")
[Code]...
what i want to do is to automatically change the selected option of the cboProductCode on page load depending on the result of a query executed onload also.
I want to use explicit conversion (CType function in VB.NET) to convert the variable d from double type to integer type and store the result as 132.
Imports System.Console
Module Module1
Sub Main()
[CODE]...
This is my code. But Visual Basic tells me an error: Error1Type 'i' is not defined.C:\Users\mihaispr\Desktop\Conversie explicita\Conversie explicita\Module1.vb1922Conversie explicita
I have an object called Result<T> that has a constructor which accepts an argument of IEnumerable<T>. I'd like to be able to pass in a datatable if possible.
I tried datatable.AsEnumerable(), but where I bind to the data it was complaining that 'MyProperty' is not a field or property on type 'DataRow' - which makes sense since 'MyProperty' isn't a property on 'DataRow', but it was a column in my datatable.Is there a way to convert a datatable to something that I can pass into the Result object and still have it bind to, say, a gridview?
I am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesI am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
What's the difference between / and for division in vb.net? My code gives very different answers depending on which I use. I've seen both before, but never knew the difference.
View 3 RepliesI am using oledbconnection object with access database engine 64 bit to get data from Excel file. While using sqlconnection object if sql string has these statements "SET ARITHABORT OFF;SET ANSI_WARNINGS OFF;" , then division by zero exception doesn't cause any problem. But while using oledbconnection these statements cause error. My code samples are below:
Dim PbpConn As OleDbConnection = New OleDbConnection("Provider=Microsoft.ACE.OLEDB.12.0;" & _
"Data Source=C:BuzBeatDataPBPData.xls" & ";" & _
[Code]....
When SUM(pbA) has value "0" then it causes error and can't get data. is there a way to close the warnings and division by zero exceptions?
Dim result as single = 0
result = CType("8.01", Single) * 100 ' result=801.0 as expected
result = CType("8.02", Single) * 100 ' result=802.000061 --- not expected
Further to the above
result = 8.02 * 100 ' result = 802.0 as expected
I am very new VB .NET and just starting If statements. My problem is: Write an If statement that determines whether the variable CurrentBalance is greater then 1000.01. If it is, multiply the variable CurrentBalance by 1.005. Otherwise, multiply CurrentBalance by 1.007.So far I have
Sub Main()
Dim currentBalance As Boolean
System.Console.WriteLine("Enter Current Balance: " & currentBalance)
If CDbl(currentBalance) > 1000.01 Then
[code].....
I really don't even know if thats how I should be starting. Not sure what to put after the first Then on how to make it multiply currentBalance by 100.5.
i face a problem while i practice the question in my text book, it require us to key in 4 digit of number and split it into 4 digit and encrypt it. Below is my coding [code] Console.WriteLine("The encrypted number is: " & encrypNumber3 & encrypNumber2 & encrypNumber1 & encrypNumber4)But its got error after i key in the 4 number.
View 2 RepliesI have a group of 25 labels named Label1, Label2, Label3, ... Label25 in a square of 5 per row, 5 per column and I wanted to assign the backcolor to all of them on a loop and assign a value of "True" or "False" to a matrix of 25 boolean values representing them.
But I was getting errors on the pattern created.
My approach was to use a substring containing a number copied from the label names:
Num = Val(sender.name.substring(5))
And the subindexes of the matrix:
p = (Num - 1) / 5
q = (Num - 1) Mod 5
The values for the lower corner of the matrix were rouded to 5 instead of being 4. Instead of (4,0) ,(4,1), (4,2), (4,3) (4,4) I was getting (5,0),(5,1)...(5,5)
So I solved the problem by creating two single variables "A" and "B", doing the divission and MOD operations on them, finding the floor of them and then converting to integer:
Private Sub Label1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles _
Label1.Click, Label2.Click, Label3.Click, Label4.Click, Label5.Click, _
[Code]......
Deviding an int by zero, will throw an exception, but a float won't - at least in Java. Why a float have an additional NaN info, while int haven't?
View 6 Repliesi have got a value in time span lets say: tsp1= 2 hour 5 minuts i have a another time span variable which contains value like: tsp2= 0 hours , 2 minuts?how can i divide tsp1 by tsp2 so than i can get exact number of times tsp2 divied the tsp1 and how much value is remaining.i am using vs2008?
View 3 RepliesIn the following linq query I have a division by zero exception wich I can't seem to code around. It occurs when the Sum of fldDevider returns 0.[code]...
How can I Make sure the ValuePerMonth field is 0 when the Group.Sum(Function(dr) CDec(dr.Field(Of String)(fldDevider))) function returns a 0. Or how do I return a 1 for Sum fldDevider if it is actually 0.
I have hit a block and not sure the best way to go with this. Looking for resources to find more on the subject
View 1 RepliesThis exercise says :"Write a program that inputs one number consisting of five digits from the user, separates the number into its individual digits and prints the digits separated from one another by three spaces each. For example, if the user types the number 42339, the program should print
4 2 3 3 9 Use the command window for input and output. [Hint: This exercise is possible with the techniques discussed in this chapter. You will need to use both division and modulous operations go "pick off" each digit.]"
Here is what I have learned in Chapter 3:
�If/Then Statements
�Console.Write()
�Console.WriteLine()
[Code]....
This exercise I have yet to start, and don't think I will be able to do much, because I have no clue how to "Pick off" the numbers using division and modulous operators. I know what the mod operator does, but I do not know how to use it and division to do what this exercise is asking me to do.
This is part of a calculator program. I first part I sort by num and sign using a multitude of commandbuttons with no parenthesis.This program below is part of the second part. I have three more subroutines for /, +,- respectively.The + and - work correctly but * and / do not.I think it is in the line: numop(m) = g * h Is there something I am doing wrong wth the syntax in multiplication?
Public str, sign(100), numstr(100) As String
Public num1lock(100), m, n As Integer
Public ans, num(100), numop(100), g, h As Long
[code].....
I have an assignment to make a multiplication table using loops. The idea is to make this: If the user enters 3 this is the result he gets:
0 1 2 3
1 1 2 3
2 2 4 6
3 3 6 9
if the user enters 5, this is te result:
0 1 2 3 4 5
1 1 2 3 4 5
2 2 4 6 8 10
3 3 6 9 12 15
4 4 8 12 16 20
5 5 10 15 20 25
[Code]...
how to use the while loop in multiplication??
View 2 RepliesHow do I multiply inside loop using this code ?
Dim a As Integer
Dim b As Integer
a = inputBox("Enter first Number:")
b = inputBox("Enter second Number:")
and I want the answer to be shown in a label.
How do you check if the division of two integers is a whole number, just answer with code, no links?
View 6 Replies