.net - Dim X As Decimal = 100.0m Do A Cast From Double To Decimal Implicitly?
Mar 30, 2011If I have the code:Dim x as Decimal = 100.0m
Is it casting from a double to a decimal implicitly. How would I do this explicitly in vb.net?
If I have the code:Dim x as Decimal = 100.0m
Is it casting from a double to a decimal implicitly. How would I do this explicitly in vb.net?
I am calling a GetSerialNo function But it showing some error like:
Cannot implicitly convert type 'decimal' to 'int'. An explicit conversion exists (are you missing a cast?).
Here is the code:
CODE:
Cannot implicitly convert type 'decimal' to 'int'. An explicit conversion exists
View 1 RepliesWhat is the cleanest, most readable way to String.Format a decimal with the following criteria
start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s
For greater accuracy I should use a Decimal instead of a Double ( so I've been told ). Why then have Microsoft chosen to use DOUBLE for most of the functions that return a floating point value in the Math Class?
[Code]....
how do you convert a decimal ( decimal place holder = dot) to a decimal (decimal place holder =comma)?
View 6 RepliesLet's say I want to convert a Double x to a Decimal y. There's a lot of ways to do that:
1. var y = Convert.ToDecimal(x); // Dim y = Convert.ToDecimal(x)
2. var y = new Decimal(x); // Dim y = new Decimal(x)
3. var y = (decimal)x; // Dim y = CType(x, Decimal)
4. -- no C# equivalent -- // Dim y = CDec(x)
Functionally, all of the above do the same thing (as far as I can tell). Other than personal taste and style, is there a particular reason to choose one option over the other?
EDIT: This is the IL generated by compiling the three C# options in a Release configuration:
1. call valuetype [mscorlib]System.Decimal [mscorlib]System.Convert::ToDecimal(float64)
--> which calls System.Decimal::op_Explicit(float64)
[Code]....
I am working on an application that allow the user to store data as numbers.These numbers are later on used for calculation. The number can be of any type and are saved as string. The problem is when they are used for calculation how can understand when it is better to treat them as doubles and when as decimals?
View 9 RepliesHow come a double and decimal treat 3 and 3.0 and 3.00 different?
For example:
Dim dbl As Double = 1 / CInt(TextBox1.Text)
MsgBox(dbl)
If I enter 3 in the TextBox I get: 0.33...
If I enter 3.0 I get: 0.033...
If I enter 3.00 I get: 0.0033...
How do I treat them all as 3?
So, yes, I've tried with these three formats, and the problem remains the same:I have a string, "s"For Each s As String In stringarray and this array is recieving data from a streamreader that is reading a csv file. The data I'm having dificulty reading are these very specific numbers(yes, only these numbers, because phone numbers get home safe and sound).The numbers I'm talking about are usually decimal.ValueList.Add(Convert.ToDecimal(s))
Now, when I convert them like that, they always bring a "D" alongside with them. I've personally checked the string multiple times, and it just has a "1", and somehow, my list recieves "1D" as a number, same thing happens with decimal numbers(0.29D for example). I've tried with Doubles and Integers, the result is the same.
here is a very important matter to be corrected as soon as possible. generally,type double can display an answer correct to more than 20 decimal places. yes,it works fine until here except for exponential system. whenever i try to find a decimal raised to the power of a proper fraction, i get a correct answer but only upto 13 decimal places. that is not fair at all! it is important to get as high precision as possible. consider this example:-
[code...]
i want that number of correct decimal places or approximation,which a windows 7 calculator has. i believe that this is someway easy to get rid of. please support.it is important for programs like calculator,worksheets,databases,etc.
I am writing a program that asks the user for their name and the number of pieces they completed. The employees are paid more depending on the amount of pieces they have completed(i.e. <200 = .50 per piece, 200 to 399 = .55 per piece, etc.). I have to display the amount earned when the user enters the info and hits the calculate button. I have to use Select Case.
I was thinking this would be an easy program but I keep getting an error for each Case saying "Option Strict On disallows implicit conversions from 'Double' to 'Decimal'. I don't understand why it thinks it is a double. It says I can correct this problem by adding "Cdec" before each equation(i.e.
[Code]...
Dim decMonthlyPayment
As Decimal
Dim decPrincipalAtRetirement
[code].....
I'm struggling to solve this problem and am throwing it out to y'all...
For example, if I had a value of 6.5, (representing 6.5 feet), I'd want to separate that value into two values:
6 - 12" sections
1 - 6" section.
This initial value could be any number from 3-16, in .5 increments. (3, 3.5, 4, 4.5, 5, 5.5, etc.)
OdbcDataReader in showing decimal fields Decimal separator disappear with DB2 dsn
View 3 RepliesAfter converting all degrees-->decimal, and decimal-->hours, how can i use Tan, Cos and Sin formula in vb.net? I want the user must enter an input (which it is a coordinat-->i already convert the degrees-->decimal value as suggested by stanav and paul.
The questions like this (i only calculate on paper but dont know how to implement in code):
Input user need to enter:
-latitude local (e.g. 1.4875)
-longitude local (e.g. 103.3883333)
[CODE]...
My user requests to change the . on the numpad to a when entering text in a multiline textbox.So I was thinking about the KeyDown event.To determine if the numpad . was pressed I can do something like this [code]But now how do I change the returned charachter as a , ? All e.Key... properties are ReadOnly. The KeyPress events let me change this by providing e.KeyChar, but in that event I can't check for the numpad .
View 2 RepliesHow would I go about rounding up decimal numbers to the nearest 2 decimal places? For example $7.0000032 would be $7.01 In theory, VB would make it $7.00 but if it is > $7.00, I want it to reflect that to the nearest penny... so $3.0000001 would be $3.01
View 5 RepliesI have a piece of code:
Dim Latitude As Double = row("fltLatitude")
Dim Longitude As Double = row("fltLongitude")
Most of the lat/longs that are being fetched from the db using SP are retrieved in properly, except for a couple of records which do not include a period to indicate a lat/long value.I have tried using these:
Convert.ToDecimal(Latitude)
CDec(Latitude)
decimal.Parse(Latitude)
but none of them are working.
I have a double value like 3768.595863. if i round this value then i will get 3768.596 but i want 3768.595.how can i get that?please reply.
View 7 Repliesis it possible to round a double to a certain number of decimal places
View 1 RepliesHow to i roundup a double number to 6 decimal places in vb.net?
View 1 Replieshow to get 1.83333333333... to 1.83?
Dim temp_1 As String
temp_1 = 5.50 / 3
Label1.Text = String.Format(temp_1, "{0.00}")
Is there such a thing as a type similar to a point, but contains a pair of decimals, or a pair of doubles, rather than integers? I searched the forums and google with no luck. I can't believe this has never come up before, I must have been using the wrong search terms.
View 4 RepliesSimple requirement to split a double value inputted into a string to decimal and fractional.I enter 12.1 and it splits it into
12 and then 0.0999999999999996
Where is my 0.0000000000000004 gone??? Did the cpu tax it?I have tried a few other tricks to split the number and i get the same result...The fractional results of each attempt
12.0 0 Amazing!!!!
12.1 0.0999999999999996
12.2 0.199999999999999
[code]....
1) One Decimal Varibale stores a decimal value
2) The value must be converted in string ( some time the comma is used as decimalplaceholder some time the dot)
3) the user modifies the value
4) i need to riconvert the string back in decimal
how can i do this
so:
Variable 123.34D ----> textBox 123,34 or 123.34 -----> variable 123.34D
I am writing an calculator application and i dont know what datatype to use. i mean should the variables be single, double, decimal...?
View 1 RepliesIn the discussion in this thread: [URL] it was reveiled to me that vb.net, using double, could only calculate values up to 18 digits after decimal.... so I started thinking and came up with this class
Public Class LargeNumber
Private pNumber As String
Public Sub New()
[CODE].............
I want to split the string into a series of doubles.... and than combine them into a large number.... The size of each double component should be 18 digits on a 32 bit computer... so that I will have room to add the last carrier...
I'm having some trouble converting a double to a string.I have a double value, like 43.64 and I need a string like this: "43.64"If I try to convert the double to a string I always get "43,64" what doesn't work for me..
View 5 RepliesIs there a way in VB .NET to have a decimal variable with 40 decimal places?
View 3 Replies