2010 [Regex] Reading Visual Studio Solution File?
Sep 1, 2010
I need to read a Visual Studio Solution file (.SLN files) to figure out which projects belong to this solution.By opening a SLN file in notepad, one can see that the projects are stored like this:
Microsoft Visual Studio Solution File, Format Version 11.00
# Visual Studio 2010
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "RadioGadget", "RadioGadgetRadioGadget.csproj", "{AE664C6C-000B-44D9-BAD8-0200D6ABE90D}"
[code].....
excluding the ... part obviously (which is just some guid I don't care about). Then I need it to match the rest too, and more importantly, I only need it to return the filename that I've underlined in the example. When I simply use 'm.Value' as I am now I think I will get the entire matched string back, right? That gets me nowhere as I'd still need to parse the filename out of that manually... Bit pointless to use regex then...
View 1 Replies
ADVERTISEMENT
Sep 1, 2010
I want to read a VB or C# Visual Studio project file so I can find out which files the project uses (code source files, not images or whatever).I simply opened a vbproj and csproj file in notepad and found that they are in XML format. A simple example follows. The red parts is what I need:
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<blabla... />
[code]....
However, it seems it cannot even find the Project element, because the query errors saying "Sequence contains no elements" on the 'Single' call...
View 4 Replies
Mar 26, 2010
I am using the book: Programming with Microsoft Visual Basic 2005: An Object Oriented Approach and have a question. It says for instance: "In Visual Studio, open the solution file of the same name appearing in the folder named Chapter.09Chapter09ApplicationLessonPreview." Where in the world do I find this file? Is this something I have to create myself or is it already done and I just don't know where to look.
View 2 Replies
Jun 26, 2011
Is there a straightforward way to make a copy of a VB.NET solution and continue the project in another direction? I'd think this is a common problem but haven't been able to find an easy solution. Copying the files and renaming seems messy to me. Does the VS IDE provide anything like this? Update: It's a small project on my home computer so I'm currently not using source control. I wasn't expecting to need to fork or anything. Is there a way I can do this without setting up git or similar?
View 2 Replies
May 21, 2009
Is it possible to get access to my VB code if I have the solution files on a USB hub but no access to Visual Studio? Can I open them up in Notepad?
View 1 Replies
Sep 15, 2009
I have to compile projects which was compiled in Visual Studio 6 in Visual Studio 2005. When i compiled i got a set of same error. I opened the project for VS6 by selecting File->open->project/solution and tried to build a solution by Build option but i am getting the following error.
[Code]...
View 7 Replies
Feb 11, 2012
I have XML which has following content. I am providing only small portion of code below. I need to read this XML file from Visual studio 2008 and display the contents on windows and web.
<Loop
Name="AT"
Count="INF"
[Code].....
View 6 Replies
Jul 10, 2010
I have a database in access and one of the fields is 'Is Quick'. I have a query that filters all of these out. How would I get the data from that query in Visual Studio 2010 (Express). VB code please.
View 1 Replies
Aug 31, 2011
Using visual studio 2010 on a PC running Windows XP SP3 (32bit) I am trying to read the output from a serial device but only get timed out error?If I open hyper terminal I can see the output, so the hardware and connections are good and the command to send data is working as well?When debugging I have no errors, when the program is run (in debugging mode) I get a timed out error from after the do loop (test=2) All I want to do is have my device output printed to TextBoxLockOut.Text? Note "comstring" grabs my com port the serial device is using - on this computer it is com4, it is a public string
Dim inputline As
String = ""
Dim command As
String = ""
[code]....
View 1 Replies
Nov 19, 2010
I'm writing a small pet program in VB2010 Express
I have 7 labels
Form1
Label1 to Label7
I want these labels to display the text from a third party Software program.
The text is displayed in a child form of the main form the text is in
"window handle is 000E0678"" RichEdit20W"
The text scroll up continuously,
every time - let's say
John (10year) 'is displayed, it takes the 10y and place it
in Label1
Ann (22year 7Street) 'is displayed, it takes the 22y & place it in Label2 7St in Label3
get that text in the labels I only know a little VB. I have used Spy++ to get the window handle
Yes lots for the pro's but we dont understand it, if its just code we dont know where to start or make changes to that code. This is something simple that beginners will understand
View 1 Replies
Jul 16, 2010
I want to be able to create a tree view that can get its nodes form a directory on a computer. In the code below, I am able to get all of the files into a list, but I cannot get the folder correct. What I mean is in your user directory, you have sub directorys such as, Documents, Music, and Pictures. When you run this code, it displays them each as thier own node, not nested. I hope this makes sense.
[Code]...
Changed the code to the way spinion told me to. When I run this code I get an error 'Object reference not set to an instance of an object' when it starts to try and add files to the tree view.
View 1 Replies
Apr 2, 2012
I have a VB project which I'm trying to configure with three build configurations.I've successfully created the build configurations, but I decided the names I was using weren't descriptive enough so I went to Configuration Manager -> <Edit...> -> Rename and renamed them.
This renamed the configurations in the Configuration Manager.I then went to do some conditional compilation testing using #If CONFIG = but it failed.Checking deeper, it turns out that the values returned by CONFIG are the original names not the new names.Checking My Project -> Compile -> Configuration I can see that the names shown in that ComboBox are also the old names.
So, even though I have "renamed" my configurations in Configuration Manager, they're not being renamed on all levels.I can get around this by recreating these configurations with their intended names but that's about as bass ackwards a solution as I can think of. Is there some method of renaming configurations that actually works or is this just the way MS intended this to."work"?
View 1 Replies
Dec 5, 2011
I have a visual studio solution written using VB.net. The solution contains 4 projects.
[Code]...
View 1 Replies
Jun 10, 2011
regx expression to be used to search for ip address in microsoft visual studio versions. If I open text files using Visual studio and ctrl+Shift+F, search al open documents, then give the regex, it should list all the ipaddress contained lines at the bottom.The ip address I consider is any four numbers seperated by three dots. Eachnumber contains maximum three digits and minimum 1 digit.
it can be 0.0.0.0 or 127.0.0.1 etc.
View 1 Replies
Mar 25, 2009
Stupid question, but how do I get access to this Explorer? The says: To create a performance session for Windows client application:
(1) Open the solution in the Visual Studio IDE.
(2) On the <B>Analyze</B> menu, click <B>Launch Performance Wizard</B>.
(3) From the <B>Which of the following available targets would you like to profile?</B> drop-down list, select the name of the application that you want to profile, and then click <B>Next</B>. You can add more binaries later.
(4) Accept the default Sampling profiling method, and then click Next.
(5) Click <B>Finish</B>.
Only problem is that there is no <B>Analyze</B> menu in the IDE.
View 1 Replies
Mar 23, 2012
i am having a problem saving the file, when i save the file in the directory (with save as)
C:UsersuserDocumentsvb Toolkit save
Now i try moving the vb files by save as again to
G:Backupvb Toolkit save
When i load the file up it says that my form1.vb missing or deleted but when i check in the files
View 1 Replies
May 9, 2012
I am trying to connect to an Access DB file when I do a drag and drop from the dataset to the form i get the following error [code]
View 1 Replies
Nov 28, 2010
trying to input a text file that's tab delimited that looks something like this.
2.2 5.6
3.7 9
1.2 9.1
[code].....
View 1 Replies
Feb 17, 2010
Will i be able to successfully install 2010 beta 2 side by side 2008? because i want to test 2010 features and some development toolkits such as silverlight while i don't want to uninstall my visual studio 2008 professional.
View 2 Replies
Nov 2, 2010
i am using Pdfsharp.dll to convert tiff image to pdf file in vb.net, and it is successfull when i run in my machine, when i use it from other machine, which shows the Error like "Raw string contains invalid character with a value > 255.",i using the PdfSharp.dll library and the following code
Dim objDoc As PdfDocument
Dim objPdfPage As PdfPage
Dim objTiffImg As Image
[code]....
View 1 Replies
Feb 26, 2012
I have a list of .txt, .doc, .pdf on my listview. How do i code this problem;
1. When i double-click the item (sample.txt) on my listview it will open in a notepad.
2. When i double click the item (sample.docx or sample.doc) it will open the MS word and shows me the things written on the particular item.
View 4 Replies
Jul 10, 2011
I need to read some information from a txt file and put all that info to a textbox (this is ready and done)but the textfile have some variables like %userName% that i need to replace programatically in vb.net?example of text file:hello %userName% , this is an automated report of the uses of your account. this is what the txt file have in it, when i read it to vb.net and put that info into a textbox is done right, but the question is how to replace the %userNams% for some text in another textbox and replaced when i press a button?
View 1 Replies
Sep 21, 2011
The error was occured when i try install setup at window 2000.
Anyone know how to solve it?
View 2 Replies
Sep 22, 2010
As you read this, though I have pretty good experience in C++ and Java, eep in mind that I am a complete beginner when it comes to VB. :)Here is one idea of what I want to do:
Option Strict Off
Option Explicit Off
Imports System
[code]......
View 1 Replies
Dec 15, 2011
im currently doing my special project in software development
[Code]...
View 2 Replies
Oct 25, 2010
I decided to to convert my excel macro in a exe file using visual studio 2010. In excel macro method find is present like this:
[Code]...
View 9 Replies
Jun 15, 2011
I'm developing an application in vb.net. You drag any type of file onto the exe, and a window pops up with some options for the file, then it saves the file to a different location, works some SQL magic, etc. It works great for the most part. The only issue I've found is that if the path of the file contains any spaces, the application will crash immediately with the error window:[URl]..I'm using: Private filename as String = Command$ This is located right inside my form's class declaration, not within a sub/function.Without this line, my program runs fine (although useless, without accessing the file).I've also tried (I think this was it, I don't have the code with me at the moment): Private filename as String = Environment.CommandLine So, in vb.net, is there a way to drag a file onto an exe and use that path name, even if there are spaces in the path name?
View 2 Replies
Aug 5, 2011
Does anybody know which version of Visual Studio 2010 contains the full set of Visual Basic SharePoint Templates? I am about to embark on a project to create Visual Web Parts to be used in a SharePoint report.
At the moment I am using Visual Studio 2008 and even though the WSPBuilder is installed none of the relevant SharePoint templates are present.Having searched SO and the web, most advise to install the templates via the Visual Studio command prompt: devenv /installvstemplates
Alas the Visual Studio command prompt is also missing from my VS2008 installation.So, the question remains: which version of VS2010 contains what I need for pain-free SharePoint development? There is a rather large price different between VS2010 Professional and VS2010 Premium, so can anyone tell me if the cheaper version (VS2010 Professional) contains all the Sharepoint templates?
View 3 Replies
Nov 25, 2009
I am just wondering how I can add Direct X references to Visual Basic in Visual Studio 2010 Beta 2. I cant find them in the .NET reference list, or the reference list, or anywhere. I downloaded the Direct X SDK for August 2009, but I can not add the .dll files to the reference list. Is there anything I can do to add them? I need the references for programming reasons.
View 5 Replies
Jan 15, 2012
I want to use "OpenGL" in my project. Is it possible to associate it with "Visual Basic" application developed in Visual Studio 2010? If yes then how can we do it.
View 1 Replies
