Add Milliseconds To Output?

May 3, 2010

The following sub prints 5/3/2010 8:39:26  to the tracelog file as per code below. How do I add milliseconds to the output?[code]...

ADVERTISEMENT

ASP.NET: Get Milliseconds Since 1/1/1970?

Apr 15, 2011

I have an ASP.NET, VB.NET Date, and I'm trying to get the number of milliseconds since January 1st, 1970. I tried looking for a method in MSDN, but I couldn't find anything.

View 2 Replies View Related

Get The Most Out Of .NET (when Milliseconds Count)?

Aug 16, 2010

I'm working on a client application (server is out of my control) that connects to a server and exchanges query/command datagrams. 'Milliseconds Count!' according to my project specification, meaning that the more we can shave off a send/receive process the better.

I understand that there are physical limitations like network bandwidth, internet latency, etc. Even so, I have a strong gut feeling that a lot of the latency I'm seeing is directly related to processing; it seems 'out of phase' from the latency of other network operations (albeit with significantly smaller datagrams). IE: A standard 32 byte Windows Ping returns in about 5ms consistently, our query/response datagram (468 bytes out, 1500 bytes back) returns in about 15ms consistently.

I'm also working with multiple threads to speed things up as much as possible at the client side, and it seems the more threads are involved the more latency is generated (I've seen up to 70ms of additional lag when using 3 threads as opposed to 2). In a recent Google I found something that I only glanced at, that said something about a limitation in Windows System Timing where some claim was made that any System.TimeSpan < 10ms was effectively going to be a 10ms Timespan because the Windows System Clock only 'Ticks' every 10ms. I wasn't paying attention at the time, but now I'm afraid it might be relevant and I can't find it again.

View 15 Replies View Related

Analyzing Image In Milliseconds?

Sep 6, 2011

I need to analyze a 100 x 100 image in less than a second I need to find out if the image contains any red pixels.I have an application that provides that functionality but it's not as fast as it needs to be.

View 7 Replies View Related

Calculate Time From Milliseconds?

May 4, 2009

I have a value which is milliseconds, I did some experimenting, and with my very limited math skill I came up with this:

Dim val = _Memory.ReadValueFromAddress(hProcess, timer_addr, 4)
Dim seconds = val / 60 Mod 60
Dim minutes = val / 60 / 60

I don't even know what will happen when the hour counts down,

View 3 Replies View Related

Converting Minutes Into Milliseconds?

Feb 26, 2009

how can i converting minutes into milliseconds

View 8 Replies View Related

Count Time In For Example 0.1 Milliseconds?

Mar 11, 2010

I need to have a microsecond-timer in my program. The default VB timer doesn't work for me because I need to count time accurately. Does anyone know a way to count time in for example 0.1 milliseconds?

View 9 Replies View Related

How To Convert Milliseconds To Date

Sep 18, 2010

How do I convert milliseconds into a timestamp (date/time) since Jan 1 of the year 1? (Jan 1 Year 1. Not Jan 1 Year 1970) This timestamp hex code from a file:e1 27 17 6f e6 69 c0 which is 63,374,851,375,000,000 in decimal (milliseconds).I can't find any converter that can convert numbers based on Jan 1 Year 1.

View 1 Replies View Related

Milliseconds Getting Stripped From SQL Server?

Aug 3, 2011

I am pulling a single field from a SQL Server 2008 table and when performing the SELECT in Management Studio, the result shows as:

2011-08-03 17:46:36.997

Now, in my application I'm storing that returned result as a string and using it to later perform an INSERT using it. I notice that after INSERTing into the database, I can see it is being stored as:

2011-08-03 17:46:36.000

Appears to be stripping off the milliseconds and replacing it with 000. In my case, milliseconds are important (sequencing thing)

View 7 Replies View Related

Time In Milliseconds Or Microseconds?

Sep 26, 2003

Q: How to computer the interval time from Starting block until its finish? For example, How to compute the time (in Millisecond or Microsecond) for execuation a serting block (Sortign or Searching Algorithm for example)? NOTE: Time must be in Millisecond or Microsecond, NOT in Second!

View 2 Replies View Related

VS 2010 - Any Way To Add Milliseconds In DateAdd?

Feb 25, 2011

Is there a way to add milliseconds in dateadd? It is not in the DateInterval enum. I created a class so my program knows what the real time is, based off the sql server. This way, we don't have to worry about people's computer clock being off, or different time zones, etc. When the program starts, it grabs the current time on the SQL server, and starts a Stopwatch. Then each time I need the time, I find the elapsed time on the stopwatch and add to the SQL time. The problem is that I use these times sometimes to do timestamps as a unique ID for certain records, and sometimes multiple records get created in the same procedure, so it is being called more than once per second, so the same ID is returned. I need the time to go down to milliseconds, so it is more precise. Therefore, I can't just multiply the seconds by 1000.

Here's my class
vb.net
Public Class RealTime
'Added 11/03/2010 v0.4.4 To determine the real time, not the time on the local machine.
'The time will be stored in GMT +/-0 World Time
Private stopW As New System.Diagnostics.Stopwatch
Private StartTime As DateTime
[Code] .....

View 3 Replies View Related

Datetime Milliseconds Dropped Off Goingbetween SQL?

May 7, 2012

When the Point of Sale program we use makes a change to a row in the SQL database, it automatically updates the ModificationDateTime for that row, and the precision is in milliseconds. I have another column called "LastSyncDateTime, and when theModificationDateTime is greater than the LastSyncDateTime, it downloads the row, finds the column that got changed, does its thing in my program, then updates the LastSyncDateTime with the same value as the ModificationDateTime so it doesn't repeat itself on the same row.The problem is that when it goes back to update the LastSyncDateTime, it loses the milliseconds precision, so the SQL Stored procedure to download new changes doesn't work ("Give me all the rows where ModificationDateTime <> LastSyncDateTime").

View 2 Replies View Related

Determine The Length (in Milliseconds) Of An Mp3 File?

Feb 11, 2011

Is there a way to get the time length of an mp3 in VB.net? I have TagLib, but it doesn't seem to have any functionality for it.

View 2 Replies View Related

Get A Timer That Runs A Process Every 31.25 Milliseconds?

Mar 3, 2011

I'm in need of a timer that runs a process every 31.25 milliseconds. Thus, after 768 "ticks" have gone exactly 24 seconds.The control "Timer" that exists in Visual Studio does not accept decimal values.So I had to round the value of the range to 31 or 32. But this raises a problem since the end of the 768 ticks there is a difference of half a second or more. And I need to run the 768 ticks in exactly 24 seconds.I've been researching, and I read some things about the "High-Resolution Timer. " But I did not understand exactly how to use it, and how to set your interval to 31.25 mils, and do that every period of this interval to run the code.

View 1 Replies View Related

Get The Current Time In Milliseconds (long)?

Dec 8, 2010

I'm looking for the equivalent to a Java System.currentTimeMilli(), in VB.NET.What is the method to call? I know about Datetime.Now, but not about the actual conversion to long milliseconds.More details about my specific need: I need to manage a login expiration. So most likely when I log in, I will set a "expiration_time_milli", equal to the current time + the timeout value. Then later, if I want to check if my login is valid, I will check is "expiration_time_milli" is still superior to current time.

View 4 Replies View Related

Resolution Of Milliseconds Component In Now() Object

Dec 11, 2010

I have a created a high performance diagnostic logging mechanism that uses a time stamp.  It's a print statement gadget that automatically prepends date/time using Now() for the basis of that time stamp.  I use the full date and time all the way down to the milliseconds value of the Now() object.

Are there any resolution issues when using the milliseconds component.

View 1 Replies View Related

Show Seconds And Minutes To Or Just Milliseconds?

Apr 1, 2010

Can i show seconds and minutes to or just Milliseconds

=vb.net
Dim timer = Stopwatch.StartNew
=vb.net
timer.ElapsedMilliseconds.ToString & " Milliseconds Elapsed During Scanning

View 3 Replies View Related

Create An Application That Records Screenshots Every 50 Milliseconds?

Jun 2, 2012

I am trying to create an application that records screenshots every 50 milliseconds... And It works below:

Private Sub Timer1_Tick(sender As System.Object, e As System.EventArgs) Handles Timer1.Tick
Dim b As Bitmap = New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)

[Code]....

But after 30 seconds I see an ArgumentException on the second line...

Does anyone have a solution or an alternate method of capturing the screen like this?

View 14 Replies View Related

VS 2008 Find Milliseconds From Jan 1, 1970 UTC Time?

Apr 20, 2010

I would like to emulate the "new Date().getTime();" function that Javascript has. This calculates how many milliseconds it has been from Midnight, January 1st, 1970 to the current time. How would I go about doing this?

View 7 Replies View Related

Make A Mouseclick According To The Time Inserted Into The Textbox (in Milliseconds)?

Oct 19, 2010

just trying to work out some functions, like time delays and such and autoclickers.What I have is two command buttons and one textbox, and what I want this program to do is make a mouseclick according to the time inserted into the textbox (in milliseconds). e.g say someone types in "500", after button 1("START") is clicked, the mouse will click every 500 milliseconds, and button 2 ("STOP") will halt execution. Also, would this continue execution in the background, if i have other programs open? I've been able to make a program that has a timer which ticks at the specified time, I just can't get it to make the mouse click, i've tried "cmdButton.PerformClick" but thats not working,

View 2 Replies View Related

Check The Connection Condition Every Few Milliseconds And Reconnect Again To The Real Gateway ?

Jun 21, 2009

I share my internet connection with other users through LAN. There's some one who keeps cutting me off from time to time to increase his download speed.I know that there is some orders that can be written in the command line to reconnect to the internet after every cut but I don't know them.I started teaching myself programming under VB 2008 Express as a hobby few weeks ago. I was wondering if there is a way to write a program in VB to check the connection condition every few milliseconds and reconnect again to the real gateway till the attacker get bored.

View 25 Replies View Related

Make A Countdown Timer In Hours, Minutes,Seconds,Milliseconds?

Jan 3, 2010

I have 4 textboxes Hours, Minutes,Seconds,Milliseconds. When textboxes values are set the count down begins. So far everything works except the milliseconds

Timer1.Tick
Timer1.interval = 100
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
Dim Vals3(3)

[code]....

View 10 Replies View Related

System.Threading.Thread.Sleep My.settings In Seconds And Not Milliseconds

Apr 14, 2012

I want to have My.Settings.Delay in seconds not milliseconds adding the 000 for the user.  I tried My.Settings.Delay + 0 + 0 + 0.  but can't sort how to do this. 

Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim var As Integer
Dim startVal As Integer

[code]....

View 4 Replies View Related

No Output In Asynchronous Program - Retrieve Output After The Events Are Invoked?

Mar 1, 2012

What I am trying to do: There are three powershell scripts with different time delays as shown below.I am trying to run them asynchronously in .NET and I followed this article to implement Asyncrhonous programming. Where I am stuck:The I am not able to retrieve output after the events are invoked.The scripts are being called but then the program ends and it shows "Press any key to continue" in console windows.I don't what I am missing here.

Info: JobRequest is a class that I use to pass around information keep track of jobs.

Sub Main()
OurAsyncFunctionCalling("psDelayScript2.ps1", "-arg1 4 -arg2 5", 1)
OurAsyncFunctionCalling("psDelayScript1.ps1", "-arg1 2 -arg2 3", 2)[code]......

View 1 Replies View Related

[2008] Express Edition - Convert The Timer So That Instead Of It Running In Milliseconds It Runs In Minutes?

Mar 3, 2009

I im trying to set a time so that the user of my quiz has to do their 20 questions in 40 minutes. i actually have a few questions about the timer. How do you make it so that you canrun this same timer over everyform and then make it stop on the last form? is it possible for you to convert the timer so that instead of it running in milliseconds it runs in minutes?

View 4 Replies View Related

Unable To See In Output Window Number 5 As Output?

Sep 25, 2011

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Microsoft.VisualBasic.Interaction.Beep()
System.Diagnostics.Debug.WriteLine(3 + 2)
End Sub

Why I don't see in Output window number 5 as output?

View 4 Replies View Related

.net - Why Only Getting One Output Value (and No Debug Output) From This Code?

Jun 14, 2012

I'm just going to throw all my code in here in case there's something wrong with a piece of the code not in the "SelectName()" sub.

Module Module1
Dim selectednames As String = ""
Dim index As Short = 0
Dim inarray As Boolean = False

[code]....

Here's an image of what it does (I suppose you can see what went wrong)13 inputs, 3 outputs expected, only 1 output given.As from what I've figured out so far, it's doing the correct amount of loops etc. It's just as soon as it starts generating the "winner" for the 2nd game key it doesn't get a string value from namesarray.Also, why is

For x = 0 To totalnames - 1
Debug.Print("namesarray(" & x & ") = " & namesarray(x))
Next

not giving me a debug output?

View 2 Replies View Related

Round Milliseconds Digits In Datetime.now From 7 Digits To 3?

Apr 30, 2009

Dim Timing1, Timing2 As DateTime
Timing1 = DateTime.Now
MyCode

[code].....

View 13 Replies View Related

Getting Shown Trace Output From Other Applications In Trace Output?

Apr 20, 2011

im using Trace to trace and debug my Application which works fine. Now i wanted to output my Trace Information to a text file like below:

Dim c As Integer = Console.ForegroundColor
Dim ts As TraceSwitch = New TraceSwitch("SPMassUploader-TraceSwitch", "")
Dim tw As New TextWriterTraceListener(Now.ToString("yyyyMMddHHmmssfffffff") & "-" & "output.txt")
Trace.Listeners.Add(tw)

[code]....

View 3 Replies View Related

Determine How Many Milliseconds I Need To "Sleep" For In Order To "emulate" 2 Mhz Speed?

Oct 15, 2009

Is there a simple way to determine how many milliseconds I need to "Sleep" for in order to "emulate" a 2 mhz speed. In other words, I want to execute an instruction, call System.Threading.Thread.Sleep() function for an X amount of milliseconds in order to emulate 2 mhz. This doesn't need to be exact to the millisecond, but is there a ball park I can get? Some forumlate that divides the PC clock speed by the 2 mhz or something?

View 4 Replies View Related

Label - Create An Output Like "picture 2" Instead Of Getting Output "picture 1"?

Feb 22, 2009

how can i create an output like "picture 2" instead of getting output "picture 1"

[Code]...

View 3 Replies View Related

.net - How To Add A Code For An Output

Oct 20, 2011

I am working on this project in .net. When you go over to the browser you will see five different restaurants and the button below says to change color and if you click on that you are able to change it. What I am trying to do is beside the name of the restaurant have the address, phone number but I really don't know how to code it in. I'm sure I do but my mind is not remembering how to do it. Below are my codes..

Here is my class code:

Public Class Restaurant
Private _Id As Integer
Public Property Id() As Integer

[Code]....

how to write the phone number and address beside the restaurant so that way they all show up.

View 1 Replies View Related

Calculation In VB - Keep Getting An Output Of Zero

Aug 21, 2010

I'm having trouble with a calculation in VB and it's a simple one but for some reason I keep getting an output of zero.

Here's the code for the calculation and the click button:

CODE:

View 5 Replies View Related

Can't Get Sql To Output When Go Live

Sep 30, 2009

I have this visual basic that calls a stored procedure. When I run it through visual studio on my local machine, it works fine. However when I move it to a server, it doesn't output any data from the sql. The page still loads, it just doesn't show any data in the labels. Any ideas why? [Code]

View 7 Replies View Related

Capture CMD Output?

Mar 7, 2011

Target:

Send commands to a CMD.

Retrieve their corresponding output (result).

Present the output in a TextBox.

Example:

send "ipconfig" to CMD.Present the output (result) of the command in Text1 TextBox.

View 2 Replies View Related

Dos Output To Listbox

Nov 8, 2010

My button is [code]I want the results that are in cmd to be listed into a list box in vb is that possible ?

View 4 Replies View Related

Get Output Sequentially From A For / Next?

Aug 8, 2009

I'm just writing a quick program that will ping servers on my network and display the results back to me by changing the color of the Server (item) in a listview control.

[code]...

View 10 Replies View Related

Get Parts Of CMD Output?

Jun 18, 2009

Im dont know whos familiar with acronis but im using the command line version and some scripts i made to restore data to hard drives.The program is running in CMD, so its should be doable. It also not only needs to redirect but keep the CMD windows open so i can input y/n if is requires it. [code]...

View 3 Replies View Related

How To Align Output

Mar 10, 2012

I need to be able to align some of the output. I can't seem to find how to tab or setw(). Below is an example of the output.

If dailyProductionRate(productCount) <> 0 Then
Console.WriteLine(" Set Up " & "-" & annualSetUpCost(productCount))
Else

[Code].....

View 4 Replies View Related

No Output Is Being Display?

Aug 23, 2009

this is that i cant convert it properly

Sub Main()
Dim a, c, d As Double
Console.Write("Enter a number: ")

[Code]....

no output is being display

View 9 Replies View Related

Output Sum Of All Odd Numbers

Mar 24, 2011

1. (Add) Create a program that will output the sum of all the odd numbers between 1 and 99 inclusive.
2. (Cash) Allow the user to key in any number of item prices for items purchased in a discount store. Display the grand total amount of all items including an addition of 8% tax on all items.
3. (Pumpkin) Allow the user to input any number of pumpkin weights in pounds into the program. Output the average of all pumpkin weights, the largest pumpkin weight, and the total number of pumpkins.

Right now I am not even sure where to start. I attempted #1 and I started by making a variable of sum = 0 and using a For Loop with a variable of Sum and Initial value of 1 and final value of 99 with a Step of 2.

View 1 Replies View Related

Reading XML - Get Output For A Particular ID Only

Apr 26, 2011

i have dis xml....i am getting d output for all d ID's but i want to get d output for a particular ID only....eg ID 1....so cn any 1 tel me d proper syntax for getting a particular ID.

[Code]...

View 2 Replies View Related

VB Dll Strange Output In C#

Aug 11, 2011

Module Module1 Public Declare Function GET_CALCULATION_FAN_ALONE Lib "EbmPapstFan.dll" (ByRef path As String) As Long Private Declare Function GET_PRODUCTS Lib "ebmpapstfan.dll" (ByRef path As String) As Long Public Declare Function SET_XML_PATH Lib "EbmPapstFan.dll" (ByRef path As String) As Long

[Code]...

View 2 Replies View Related

VS 2005 Output Did Not Appear?

Aug 18, 2011

Here is my program, this program is use to find gred for subject mathemathic. In this program i use 1 textbox which name as txtmark.text use for user input, Button process as btnprocess use for user click for run the program and i also use label which i named it lblmesej as output based on the mark..My probleam is after user click btnprocess there is nothing output are appear in lblmesej.text..

Public Class Form1
Private Sub btnprocess_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnprocess.Click

[Code].....

View 2 Replies View Related

VS 2008 Why Is The Output So Big

Oct 12, 2010

I'm comparing 2 files, each about 90MB. Here is my code to get the difference:

Dim bytOld() As Byte, bytNew() As Byte
Dim intHandle As Integer, i As Long
Dim u As Long
intHandle = FreeFile()

[code]....

The output (patch.dat) is over 800MB... Why is it so big? Can I make it smaller? (<10MB) How does the Patcher Here make Patch Files so small?

View 4 Replies View Related

ADVERTISEMENT