I am looking to create an application which includes:
Removing a computer from the domain
Removing a computer from a workgroup
Adding a computer to a workgroup
Adding a computer to a domain
This application will be ran on the computer manually.
Is it possible to check that the computer is in Domain Or in Workgroup.
if you want to manually check that computer's status, simply right click on
my computer and then select properties, then select computer name tab.
now you can see the computer is in domain or in workgroup.
I would like to list make a list , such as, listbox, grideview, tree view that display all my network computer, I mean workgroup computer or domain computers, or all connected computers ip address, but I don't know what code and what object to use in visual basic 2010,
View 4 Repliesi need to copy file from domain to workgroup and one domain to another domain and workgroup to domain
how to copy file with authentication
how to get in a listbox all computers in a workgroup, NOT in a domain?
View 3 RepliesI have a function that works perfectly when I attempt to add a user from the same domain into a group of the same domain.
Function AddUserToGroup(ByVal strUserDN As String, ByVal strGroupDN As String, ByVal strGRPDC As String, ByVal strUserDC As String) As Boolean
Dim oUser As DirectoryEntry
[Code]....
The error is actually being thrown on the Invoke line, but as I said earlier, if the user is in the same domain, this works perfectly.
How can I write a code in VB that will give me back the name and workgroup of computers who are using the same IP address in my local intranet? The OS is XP.
View 1 Repliesis there are possible way in VB.net to add all the IP addresses and or computer names where the workgroup of the computer is located?
for example I am in a workgroup named: HOME
is it possible to get all IP/computer names in the workgroup HOME?
Is there a way to join and remove a compuer to and from a domain in vb.net instead of using netdom?
View 4 RepliesI would like to make a VB.NET program that changes the computer name and then add it's to the domain.
View 6 RepliesI have managed to get most of what I need done. I can search computers on my domain and then add the names of the computer and properties to a tree view. [code] Where can I get a list of all the properties I can get data from in regards to a domain computer.I can pull the results when I know the name of the item but how can I just use no filters and then populate a listbox or treeview with every one so I can look at them? [code]
View 1 Repliesi need to check if my Computer is connected with an Active Directory Domain or only in a Workgroup. Is this possible?
View 4 RepliesAttempting to pull WMI Win32 properties information from a server in a trusted domain using the delegate string listed at bottom and receive the error listed below. The account has fullpermisions on the target server's root and subs WMI namespace and wbemtest connects fine. And all servers are in 2003 Native AD forests and trusted for delgation?
Error:
Scriptname.vbs(20, 1) (null): A security package specific error occurred.
Connection Moniker:
Set objWMIService = GetObject("winmgmts:" _
[code]....
i am a starter on VB(you can see that in the name),and i removed the RadioButton from the list.
View 5 RepliesI am working with my project and I have difficulties in my program. This is the set-up: I put a textbox1 and a button1 in the form, textbox1 is for the property of the label text to be add
when I click the button1 I have another textbox, label and a button,I want the added button to remove the textbox, label and if possible the button itself, is there a way to delete a control by the added button?
i'm creating a web form and i want a user to be able to make certain selections and then add the selections to a text box or listbox.Basically i want them to be able to type someone name in a text box ... check some check boxes and for it up date either a text for or a list box with the result on button click...
e.g.
John Smith Check1 Check3 Check5
I'm trying to use a split button from a tool strip to add and remove selected items in a listview.Users click the button to add the selected item which appears in the split button drop down menu as checked.The drop down menu has three items at any one time, each with a default value of <none> - this is replaced with the text from the listview when an item is added.When users click the item from the drop down, the item is unchecked and the text returns to <none>.
The drop down should populate from the top down so if a user removes item 1 or 2, the items below would appear to be moved up with the 3rd item now showing <none>.
[Code]...
So I have a dropdown setup on the page called ddlVehicleType that is populated from a store. This method gets called when another dropdown is changed, and it's supposed to remove all items from the aforementioned store, re-add them as needed, and then populate the dropdown with the new values.
It's doing everything it's supposed to EXCEPT clearing the store before it re-adds the values, so the result is, when I switch, I'm getting what it used to be PLUS the new values that should be in there by themselves.[code]...
I am trying to learn how to work with the different controls in Visual Studio for VB.Net in particular the List View and Tree Views. I don't have any code to show as I am not working on anything in particular just messing around with it to learn what the different controls do that weren't covered in my Intro to VB.Net class last semester.I would like a clearer explanation on how to actually use code for these controls. In particular adding and removing items from the List and Tree Views using code.
View 1 RepliesThe user picks x amount of scenarios from the combobox, and x amount of columns appear in the datagridview. If the user changes the number of columns from x amount to y amount, the columns should be added/removed respectively but currently when y amount is chosen x amount of columns are in the datagridview.
I'm not sure how to do this, I've tried using an IF statement under the .SelectedIndexChanged event but the code adds columns until it reaches as high as it can go, then pulls an error saying too many columns.
i'm making a small word processor program using vb 2008 and i need the codes for the following commands: creating table adding and removing rows and columns header and footer
View 4 RepliesMy application is in VS 2008 (vb.net Windows form)
I want tips for this:
What types of care I take for it?
What types of problems can be generally happen?
I am writing script to control processes on a remote computer. I have no provlem monitorinzing processes or services on computers in my own domain, but i cannot figure how to acces a computer on a work group. The error message is "access denied". I have examined the setting in "wmimgnt.msc" and the dcomcnfg, and both included proper right for local administrator group.
View 16 RepliesI have a database that is secured with a workgroup and I can not open it from VB7 to store or read data from it. I do not know what I am doing wrong.
Code in vb
Private DatabaseName As String = "C:\_Test SoftwareAppendix_FTEF1060.MagFlowMeterCalibrationDatabaseSecurity.mdw"
strConnect =
"Provider = Microsoft.Jet.OLEDB.4.0;" & _
"Data source = " & DatabaseName & ";" & _
"Jet OLEDB:"
[Code]...
How can i get a List of all Arivable Computers in my Network/Workgroup ? I need to add all to a Listbox
View 7 RepliesI'm trying to figure how to pull the computers workgroup name using VB.NET.
View 6 RepliesI am very new to NTLM/LDAP and trying to authenticate using NTML running on a local machine. The code provided by Microsoft [URL] seems to work, I just do not know how to connect to it.
I know that the authentication service is running because Contos 8 has been set up to authenticate using NTLM and it is working. I just do not know what the "connection string" should be:
I am trying: LDAP://CN=machinename with no luck.
Dim adAuth As LdapAuthentication = New LdapAuthentication("LDAP://CN=LOCALMACHINENAME")
Dim entry As DirectoryEntry = New DirectoryEntry(_path, domainAndUsername, pwd)
How can I make a LAN Messenger via IPv4 to chat with computers between in a Workgroup?
View 4 RepliesThis error is exceptionally annoying.I've done various searches, and have been able to fix this issue.I am one of several developers on the application and the only one with the issue. I've fixed it before temporarily by adding an extension to the My Extensions panel in the project's properties (which generates a different error) and then removing that new extension.That made the error go away.
If Not My.Computer.Network.IsAvailable Then
ISConnectedToNetwork = False[code]....
Gives the error:'Computer' is not a member of 'My'.
i have a task to create a TCP Server (a program that is listening on its network card interfaces for incoming data stream).I have search on the internet and i found that i can use two methods : Socket or TCPListener class.I have created an example for Socket class, but i wondering how could i test it? I need to check that if another computer in the network send some string data to the listener computer , then this message should be displayed.Here is the example from microsoft that i am using for TCP Server using Socket:
Public Shared Sub Main()
' Data buffer for incoming data.
Dim data = nothingc[code]....
But it does not work because of the PORT setting.If in the TCP Server i have "Dim localEndPoint As New IPEndPoint(ipAddress, 0)" the client crashes, but if i change the port from any (0) to 11000 for example,the client works fine.Do you know why?
Later edit2:Maybe i should have started with this question:Which method is recommended for my scope?asynchronous or synchronous method ?