So I'm making a program that has a few selections from a ListBox, and when one is selected, it will clear/load items on a groupbox. However, when I add a label, it will only display the first 2 or 3 words.Here is the code I use to add a simple lable, that doesn't work:
If (ListBox1.Text.Equals("Mode")) Then
RichTextBox1.Text = notes
GroupBox1.Controls.Clear()
[code].....
I have a form with a Label. And Label1 Show's the day Date Time. But How do I separate the Day, Date, Time, as you can see in the picture below I have Managed to put a space Between Day and Date but not Between Date and Time I have tried " " without success.
Private Sub Timer1_Tick(sender As System.Object, e As System.EventArgs) Handles Timer1.Tick
Select Case Weekday(Now)
Case Is = vbSaturday
Label1.Text = "Today is Saturday " + Today + TimeOfDay
Case Is = vbSunday
I am still a beginner programmer so keep in mind that what I'm trying to do is beyond my knowledge but I have no one to teach me Visual Basic except from what little I can learn off of the internet. Currently, I am using Visual Basic 2008 Express Edition so my problem may be appear different if I show you any of my code.
I've created a program that contains a label and the words in the label form a question. Below that is a textbox with some text that has to be memorize for a play. Just think of the question as the previous speakers part. So far I've set it so that the words in the textbox are randomly removed and are replaced with a blank. I face with the program is that the user can't enter the answer because the blank is in the way.
Instead of putting a blank where the missing word is I would like to have some textboxes put there that way the user can enter the missing word and so that I can later insert some code that will let the user check to see if the answer they entered is correct.now the missing word is still replaced by the blank so I need to get rid of that and insert the textbox wherever the words are missing.
I am making an application that is designed to restore the settings for another application of mine. It so far contains 1 Label, 1 GroupBox and 4 CheckBoxes. The code I am making is designed so that when CheckBox1 is checked, CheckBox3 is enabled, and vice versa.
That does work, with this code in CheckBox1_CheckedChanged:
If CheckBox1.Checked = True Then
CheckBox3.Enabled = True
Else
CheckBox3.Enabled = False
End If
As I said, this code works exactly as intended. However, when I try to do the same with CheckBox2 and CheckBox4, using the following code in CheckBox2_CheckedChanged:
If CheckBox2.Enabled = True Then
CheckBox4.Enabled = True
Else
CheckBox4.Enabled = False
End If
It is the same code, basically, the problem is though, when I check CheckBox2, then CheckBox4 will enable, but when I remove the check from CheckBox2, CheckBox4 will remain enabled. [URL]
way to highlight groupbox or label when clicked?? way to show selection of a thumbnail(one out of five images) when clicked....
View 3 RepliesI've been struggling with something I imagined would be simple. My aim is to create a TextBox or Label with in a GroupBox using VB.net, yes I could use the Toolbox/Common Controls to do this easily, but it's a pain when planning on making more than just one or two of them
Here's my current coding to create the actual text box.
[Code]...
All that works perfectly, but how would I allow it to show up within a GroupBox?
I am adding a several controls to a groupbox dynamically, but I can only see one of them. I am changing the location for each one just a little so so they should all be visible. When I count the rows in "dtOptionGroupOption it returns the correct #.
'Starting location for Options.
Dim intOptionLocationX As Integer = 0
Dim intOptionLocationY As Integer = 10
[code]....
i have this code which draws a continuous circle using a timer. Now I have to display it in the form which has a group box with loads of other fields and information. Now can anyone please tell me how can i add the circle into the group box as it can be displayed.Currently the circle is being displayed behind the group box which is not visible.
Private Sub Timer1_Tick(ByVal sender As Object, ByVal e As EventArgs) Handles Timer1.Tick
Me.sweepAngle += 1
If Me.sweepAngle = 360 Then
[code]....
how to get a progress bar to go up to say 50 then stop and it shopws label one when it reaches 50.
View 1 Repliesis there anyway i can randomly call up even numbers like i have a label (label1) and button (button1) i want to click on the button and it shows EVEN NUMBERS on the label at random?
View 6 RepliesI'm trying to program a countdown timer that shows the time in a label, with a button to start it, and if the button is pressed again add certain amount of time, for example 1 minute.
View 2 RepliesI'm looking for a simple script:
I have a VB Net windows form created with
1] One lablel (to print the words to)
2] One text box to type in the words I need to appear
3] One button to print the words from the text box to the label.
4] One button to exit the program
I know that this sounds extremely easy for you pros out there but if i could find the code for that simple program I might be able to relearn from where I left off..
I have been learning visual basic and this is my code I have
Imports System.IO.StreamWriter
Imports System.IO.StreamReader
Public Class Form1
' Form Load
Dim w As IO.StreamWriter
Dim r As IO.StreamReader
[Code] .....
My problem is that I want label1 to count one when the information in Textbox5 is matching a line of info in Listbox1 so far I can do this but when the info changes by me pressing Ctrl+C it works it counts 1 but my problem is my clipboard info is updating automatically I can see the change in the textbox but it wont count.
Windows forms .net 4.0 vb application. This is a small trivial thing but I was trying to just change the color of one word in label.text. But its not happening and I have a strong feeling that to make it happen is going to be more extensive than its worth... A snippet of what I am trying to use is below...
Dim _changeLabel1 As String = " Note Fields Marked in "
Dim _changeLabel2 As String = " are Required"
Dim _attrib As New Label
[code]....
I've got a form here with a listbox full of words. I'd like to allow the user to insert new words and have it update the database it's getting the data from. Can I have it display a msgbox, the one that takes input from a user, and use that to update the database?
View 13 RepliesIm trying to get an application to count letters and words. I want it to count them at runtime and display it in a label box. My form will run and I can type text in my textbox but my lblOutput doesn't update.[code...]
View 1 RepliesI've got a simple textbox and as the user enters text in the textbox I display a label below with matching words (to what they are typing). When they click the DOWN or UP arrow I highlight one of the words below in the label.
[Code]....
I have to create a program where the user enters 2 numbers and the program outputs all the even and odd numbers between those 2 numbers.I have that part of the code complete. But now I have to enter code where if the user enters a letter instead a number in either input box, that a message pops up and tells them to enter a number, instead of a letter... I keep going round and round on this and can't seem to get it quiet right.Here's my
'Author: Ambre A. Coleman
'Purpose: To show all odd and even numbers betweeen two entered numbers
'Date: 09/14/2011[code].....
I have a checkbox in my options form to change every every font size in the form to something like "20" when it's checked. is there a way to globally change the font size of everything when the checkboxes checkstate becomes checked.
View 9 Repliesi have a sort of problem when i try to add some linklabels in my groupbox. I used this
Me.Controls.Add(Groupbox3)
Groupbox3.Controls.Add(FlowLayoutPanel)
I can only add 4 linklabels no matter how big is the groupbox, i tried autoscroll but nothing. How can i do to store minimum 20 linklabels in a groupbox? Here is the whole code i used:
Imports System.Net
Imports DevComponents.DotNetBar.Controls
Imports System.Windows.Forms[code]....
Is there any way, maybe with a specific reference to put a control that records what plays wmp activex and to save somewhere on your computer?
I want to have some labels on a form with the same font color as the caption on my group boxes, and furthermore I want these colors to change if the user has applied a different Theme on their system.
Can I do this without changing the GroupBox caption from its default?[code]...
I have a form that I am loading text (strings) from a database into a label.text (so the text from the database shows up into the label) I have done this code in a class that keeps all my database stuff seperate.
Public Function getQuestions() As List(Of String)
Dim question As New List(Of String)
objConnection.Open()
objReader = objcommand.ExecuteReader
[CODE]...
Within the form that the label is in I have done this code
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Label1.Text(db.getQuestions().ToArray)
End Sub
I am basically making a quiz, so that when the form loads, question 1 is on there is 4 possible answers. You then press next button and it goes to the next question.
I am having trouble with a separate program that keeps saying Adobe flash is not installed. And I have tried everything but it still wont go away (that was off topic a bit). I want to create a program that will auto click the words "Click Here" if the error message shows. Because if I click there then it will work normally until it pops up again.
View 3 RepliesHere using VB .Net 2008. I seem to be having trouble getting group boxes to appear when I click a radio button.
For example:
CODE:
This indeed brings up the first radio button however I have other groupboxes underneath which with the same code will not appear when the radio button is checked.
Eg:
CODE:
The second groupbox does not appear and is directly behind the first groupbox. The Top code doesn't seem to be working either.
I have 4 set of words store in array and wan randomly selects and scramble its letters in a label. i just know how to do the coding part of randomly display the words in the label but it no scramble i have no idea to do the scramble part, any expert can give the solution or example?
Below is my code:
Dim word(4) As String
Dim random As New Random
word(0) = "superman"
[CODE]...
how can i call data from database that newly updated(into row) to be inserted into a labels, here is the screenshot:
View 2 RepliesI know it is possible to add a tooltip to just about every element in Visual Studio, but I was wondering if anyone knew if it was possible to add screentips to a label? I have 5 images I'd like to trigger when the user hovers their mouse above the element (a label).I have 5 labels: Form, Crown, Trunk, Root Flare, and Roots and 5 pictures. I know there is a MouseHover event but I cant seem to make it trigger the picture I want when it hovers.
View 4 RepliesI made the labels red so you can see them. I used a picture of a little mug as bullet, aligned top-left. The label text normaly begins at the far left of the label, but with a bit of coding I solved that problem. I did not want to add extra spaces
to the text directly for keeping the data base small. The problem however is when the label has 2 or more lines of text the text don't line up nicely with the top line, once again I no not want to save the extra spaces to the data base.
Here is the picture and the code used.
CheckLabel.DataBindings.Add("text", Hoof_GeregteBindingSource, ("Inhoud" & (Inhoud_Label_Counter).ToString))
Dim MyVar As String = CheckLabel.Text
MyVar = MyVar.Substring(MyVar.IndexOf("#") + 1)
Select Case CheckLabel.Text.Substring(0, 1)
[code]....
I am attempting to dynamically create a profile page. Everything works fine except when I try to add the title (surrounded by <h2> tags) to the lbl control which is inserted in the select statement. Let me know if this is too confusing and I will attempt to explain further.
[Code]...
I need to be able to find out if the text in my label is resizing the label to an extent where it extends beyond the form, I think I can do this using the form's .right and the label's .right property.how do I add in new lines / wrap the text or whatever?
View 2 Replies