Restore Settings From Another App - Label / GroupBox And CheckBoxes
Feb 16, 2012
I am making an application that is designed to restore the settings for another application of mine. It so far contains 1 Label, 1 GroupBox and 4 CheckBoxes. The code I am making is designed so that when CheckBox1 is checked, CheckBox3 is enabled, and vice versa.
That does work, with this code in CheckBox1_CheckedChanged:
If CheckBox1.Checked = True Then
CheckBox3.Enabled = True
Else
CheckBox3.Enabled = False
End If
As I said, this code works exactly as intended. However, when I try to do the same with CheckBox2 and CheckBox4, using the following code in CheckBox2_CheckedChanged:
If CheckBox2.Enabled = True Then
CheckBox4.Enabled = True
Else
CheckBox4.Enabled = False
End If
It is the same code, basically, the problem is though, when I check CheckBox2, then CheckBox4 will enable, but when I remove the check from CheckBox2, CheckBox4 will remain enabled. [URL]
View 5 Replies
ADVERTISEMENT
Dec 30, 2011
How should I go about dynamically creating checkboxes contained in a groupbox?
View 3 Replies
Apr 3, 2011
I am currently creating a program for my own use but I need some information about groupboxes. I have 3 groupboxes with each some checkboxes in them. My question is: How do i get the number of objects (checkboxes) in a groupbox. I tried looking for the index like in a listbox but it isn't part of the controls.
View 3 Replies
Mar 8, 2012
Im having some trouble saving and restoring a TrackBars value to my settings.First of all, this trackbar is controlling a WMP components volume.. That works fine, no problems here, i can control the volume with no problems with this
Private Sub TrackBar1_Scroll(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TrackBar1.Scroll Volume.Text = TrackBar1.Value Form1.RadioPlayer.settings.volume = TrackBar1.Value
End Sub
What i want to be able to is for the application to save the value the Trackbar has been set to, when the application closes and the restore that value when it is launched again. And for this i use Application Settings.
[Code]...
View 7 Replies
Dec 3, 2010
I updated a VS2008 vb.net application to VS2010 targeting the .Net 3.5 framework. This application has a windows form that contains a tab control. This tab control contains 6 tab pages. The tab control's tab pages contain group boxes. The group boxes have their anchor property set to Top, Bottom, Left and Right. The tab control's anchor property is also set to Top, Bottom, Left and Right.
When I open this form in VS2010 and resize the form, the tab control is automatically resized. The group boxes inside each tab page appear to automatically resize. If I close the form and immediately reopen it and click through each tab page; the first tab page's group box is resized, but each of the other tab pages's group box has not been resized.
I reported this issue through Microsoft Connect - [URL]. This worked in VS2003, VS2005, VS2008 but was broken in VS2010. I really want the behavior that existed in the previous versions of visual studio. Right now, I have to manually resize each individual group box every time I bring up the form in the designer.
View 3 Replies
Oct 23, 2010
So I'm making a program that has a few selections from a ListBox, and when one is selected, it will clear/load items on a groupbox. However, when I add a label, it will only display the first 2 or 3 words.Here is the code I use to add a simple lable, that doesn't work:
If (ListBox1.Text.Equals("Mode")) Then
RichTextBox1.Text = notes
GroupBox1.Controls.Clear()
[code].....
View 3 Replies
Dec 24, 2009
way to highlight groupbox or label when clicked?? way to show selection of a thumbnail(one out of five images) when clicked....
View 3 Replies
Oct 19, 2009
I've been struggling with something I imagined would be simple. My aim is to create a TextBox or Label with in a GroupBox using VB.net, yes I could use the Toolbox/Common Controls to do this easily, but it's a pain when planning on making more than just one or two of them
Here's my current coding to create the actual text box.
[Code]...
All that works perfectly, but how would I allow it to show up within a GroupBox?
View 7 Replies
Dec 9, 2010
How to count the total no. of asp.net checkboxes, checkboxes checked, no. of checkboxes remain unchecked in webform using vb.net ?I m using Visual studio 2008 with vb as a language ..I my webform i have 10 checkboxes...i wanna count total no. of checkboxes in webform in textboxes1 total no. of checkboxes checked in webform in textbox2 total no. of checkboxes remain unchecked in webform in textbox3?
View 2 Replies
Jan 23, 2011
I would like to use checkboxes to determine the names of multiple labels, but seems like a lot of code.
[Code]...
View 6 Replies
Mar 7, 2012
I have several checkboxes in a groupbox on a vb 2008 express userform. I would like to check the checked status of each when clicking a command button and then write the checkboxes caption to be used in an email or print out. I've tried several methods and always end up with the same error "Invalid Cast Exception". I have read the help on msdn and still do not understand how to make it work. Here is the code I've been trying
Dim chk As CheckBox
Dim sb As New System.Text.StringBuilder
Dim names As String
For Each chk In gbInterior.Controls
[code]....
I have also tried the code below but cannot figure out how to check the status and print the checkbox caption.
Dim ctl As Control
For Each ctl In gbInterior.Controls
If TypeOf ctl Is CheckBox Then
[code]....
View 3 Replies
Jun 17, 2010
[url]..I'm trying to use the Restore.Abort function during an SMO restore process - What would be the best method?
[code]...
View 4 Replies
Nov 26, 2011
I have a checkbox in my options form to change every every font size in the form to something like "20" when it's checked. is there a way to globally change the font size of everything when the checkboxes checkstate becomes checked.
View 9 Replies
Jul 28, 2010
i have a sort of problem when i try to add some linklabels in my groupbox. I used this
Me.Controls.Add(Groupbox3)
Groupbox3.Controls.Add(FlowLayoutPanel)
I can only add 4 linklabels no matter how big is the groupbox, i tried autoscroll but nothing. How can i do to store minimum 20 linklabels in a groupbox? Here is the whole code i used:
Imports System.Net
Imports DevComponents.DotNetBar.Controls
Imports System.Windows.Forms[code]....
Is there any way, maybe with a specific reference to put a control that records what plays wmp activex and to save somewhere on your computer?
View 2 Replies
Feb 26, 2009
I want to have some labels on a form with the same font color as the caption on my group boxes, and furthermore I want these colors to change if the user has applied a different Theme on their system.
Can I do this without changing the GroupBox caption from its default?[code]...
View 4 Replies
Sep 2, 2009
I would like to know if there is a way to set the Label Font Settings of VB 2008 to the Font I always use instead of the one that Visual Basic wants to use. I would to always use Arial Font, Bold set at 10, for my default setting, but cannot find where I can set this.Can this be done or am I out of luck and am stuck with the M<icrosoft Sans Serif 8 point?
View 3 Replies
Apr 28, 2012
I would like to know if there was a way to loop through all the checkboxes on a form and if the checkbox is checked then I need it to copy the text from the checkbox and the label. Thera are 23 of these labels with two checkboxes for each.I need to be able to paste this in notepad and have it formated as such
Yes 1. Are you older than 18?
No 2. Do you like dogs?
View 3 Replies
Jun 22, 2010
Here using VB .Net 2008. I seem to be having trouble getting group boxes to appear when I click a radio button.
For example:
CODE:
This indeed brings up the first radio button however I have other groupboxes underneath which with the same code will not appear when the radio button is checked.
Eg:
CODE:
The second groupbox does not appear and is directly behind the first groupbox. The Top code doesn't seem to be working either.
View 5 Replies
Jan 13, 2011
The company has been using Visual Studio 2008 and .NET Framework 2.0 for approximately 2 years. During that time we released several versions (4.x.x) of our program to the public and were able to preserve the user's settings using My.Settings.Upgrade.During the past development cycle we upgraded the program to Visual Studio 2010 and .NET Framework 4.0 and changed the version to 5.x.x. Now, when a user upgrades from 4.x.x to 5.x.x they lose all of their settings.However, in all upgrades after that point (ie 5.0 to 5.1) all the user's settings are once again preserved.I checked C:Documents and Settings<USER_NAME>Local SettingsApplication DataCompanyName and it contains two directories:
ApplicationName_Url_aaa ApplicationName_Url_bbb
where aaa and bbb are 32 character strings. All of the user.config files for the 4.x.x releases can be found in the ApplicationName_ Url_aaa directory. All of the user.config files for the 5.x.x releases can be found in the ApplicationName_Url_bbb directory.Based on this information it seems like something changed when we converted our program to VS2010 and Framework4 that is now causing a different 32 character string to be generated. However, we have been unable to track it down.
View 9 Replies
Jan 3, 2012
I have the following structure:OLD: frmMain (WinForm)uscStat (UserControl with Grid) In frmMain I'm able to make some settings and load the result of the settings via LinQ into the Grid of the uscStat.
[Code]...
View 1 Replies
Jan 14, 2009
I just wondered if you can or can't save arrays using the settings system object. There seems to be no way of entering it at designtime. It seems implied you cannot create new user settings.subobjects at runtime. I'm looking to find the easiest way to save a populated array of PictureBox's. If the only way is a self/custom made/managed .ini file then I need to know so i can start on that but I was hoping to use some of all this phaff in the new frameworks usefully.
View 3 Replies
Aug 5, 2009
I am rewritting my application to conform to ms standards. We used to save all settings to registry for user settings, servername, size and locations.so we are now saving them into My.Settings app.config the only problem is that each time there is an update clickonce will isntall the newupdate but now all settings are loist and user has to save everything all over again..
I am trying to follow the book here but it seems i keep getting stuck somewhere. registry has worked fine for years but i understand we must move on, but if stuff like this happens then i just wasted a long time converting all code to conform for it to not work..
View 1 Replies
Sep 8, 2009
Is there a way to maintain application modified Settings in the settings files after a program update? i.e. I have 10 or so values in the settings file and the users can modify them... when I send a program update they revert back to what I initially programmed them to be.
View 3 Replies
Feb 8, 2008
i have created a user setting named 'setmeup' as string, scope = user, value = "magical meow meow!".in my code i access it and assign it a new value like this...my.settings.setmeup = "howdy cowboy!"my.settings.save()application.restart()when the application restarts, i expect the my.settings.setmeup = "howdy cowboy!" but when i check its contents its still "magical meow meow!".but when i use application.exit() instead of application.restart() and manually restart the program, my.settings.setmeup = "howdy cowboy!" which is correct.what must i do? i want to use application.restart() because i don't want the users to double-click the icon again to start the program. i want the program to restart automatically.
View 2 Replies
Apr 15, 2011
1. I can't find the file which reflects changes to user settings. This might be because I just can't find it (I can see a bunch of user.config files but they are all empty - weird!), or...
2. I'm not actually saving them when I think I am.
Regarding 2. - do I need to invoke
Is this all I need? And if so, why are my user.configs empty?
View 1 Replies
Mar 25, 2011
I'm working with an Treeview and i'm new at it and i have 2 questions.
1. How can i save the treeview items, to settings (my.settings.history)
2. How can i save the treeview items as an TXT or XML file or another exception.
View 13 Replies
Mar 3, 2009
my old vb6 program used to store to ini files now with .net I rekon I need to do something new.. was thinking XML but then in searching around I stumbled apon this my.settings stuff.. so I followed the instructions but something strange is going one..
1. whats the difference between the standard my.settings and adding a new class that is of settings ? anything ?
2. I made 10 new settings in the setting manager but when I try to change then it gives me the old squiggle line saying no go.
View 15 Replies
Oct 30, 2009
I have created a settings-file for my plug-in-based app. When the mainApp writes the settings to the file, the pluginApp should read the settings from the settings-file (when opening or at runtime even better), but somehow it reads the settings from the app.config-file. This means that the pluginApp never will read the settings according the values of the file.
View 4 Replies
Aug 5, 2009
I saw that you can also use a "Settings File" (Add new Item)to add your settings instead of the application settings. But I can't seem to write any values to the file. Someone with experience with the "Settings1.settings"?
View 2 Replies
Jun 11, 2010
Small questions about the settings.settings. Are these settings saved into the registry? I'm want to use and external file for my connection-commands. I don't want to use the registry to store the strings. What do you recommend?
View 11 Replies
