I have two 1d arrays each containing some string data. I need to dump the contents of the arrays to a single richtextbox. I can do this, however the text isn't aligned properly.[code]...
View 10 RepliesI need to be able to align some of the output. I can't seem to find how to tab or setw(). Below is an example of the output.
If dailyProductionRate(productCount) <> 0 Then
Console.WriteLine(" Set Up " & "-" & annualSetUpCost(productCount))
Else
[Code].....
I am trying to get the output of a CMD command attached to a RichTextBox control. For this sample, I am using the PING command. It works but unfortunately not the way I want it to. Instead of 'appearing' in my RichTextBox line by line, it waits until the entire process is completed and then it attachs it to my RTB.
[Code]...
I am trying to make a simple program that generates random musical notes, and for the most part, I'm done, but at the end, I'm left with an array full of notes that I'm not sure what to do with. I want to output the notes to a label, and the array length is variable. I really have no idea what to do. I am trying to display the array OutputNotes:
[Code]...
I need to add an additional dimesion to outputArrayOfBits() in the code below which I hope conveys my intention. I need to convert a one dimensional array of 1 to n boolean (bit) values into arrays that group them by 8's so the output can be consumed by someone needing these values to be in hex format (0000 1111) = 0F How do I change the declaration of 'outputArrayOfBits and the nested control loop to achieve that?
Dim inputArrayOfBits As New BitArray(32, True) ' I can't change this.
'Create array of bytes containing what will be sent out has hex numbers 0 - F
'outputArrayOfBits(0) = (1,1,1,1,1,1,1,1) 'Hex value FF
[code]....
How to copy RichTextBox to an array line-by-line and back to another RTB From that array?
View 2 RepliesI'm trying to loop through Labels that are named Label1 through Label16 and output integers from Array into the Text property of the labels. I think everything works except I can't figure out how to assign MyLabel the value of the current Label # in the loop. [code]
View 3 RepliesI am generating an array of random numbers for for a class project (simple yahtzee game)I am comparing the output of the array and displaying a picture of each matching dice in a picture box.I would like to use check boxes to select a position of the array so it cannot be changed until the check boxes are clearedWhen the check box is checked, the value of the position in the array should not change.
View 6 RepliesI've to make a program that reads an arithmetical sentence from a textbox, e.g 12.3*34+4*5-3 and then on another textbox identify and display what is the content of the first textbox, for example taking the last ex:
If I have this input:
12.3*34+4*5-3
The output should look like this:
<number>12.3
<operator> *
<number> 34
<operator> +
[code].....
This program should only read this operators like (+,-,*,/).I'm have in mind 2 ways of doing it, one with regex and the other taking the first sentence, put it on an array, then trim it, and somehow get the values of the array and identify if it is a number or a decimal number and if it's an operator and then display it.
The difficult part or the part that i can't conceptualize is how to implement it with regex (it should be easier with a regex format than storing it on a array).I write a bit of code, I used an array to store and then to print the numbers and I used the split function to separate the math operator, but I dunno how to print the operators and the tags.
vb
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim Sentencia As String = TextBox1.Text Dim i As Integer Dim arryTextBox() As String TextBox2.Clear() arryTextBox = Sentencia.Split("+", "-", "*", "/") For i = 0 To UBound(arryTextBox) Dim Array As String = arryTextBox(i)
[code].....
Btw, I also have the code to validate the input on the textbox ::wink::
I have some richtextboxes which display contents of a jagged array. When the RTB loses focus, contents of the RTB are placed in the array (so new entries in rtb are updated in the array). This works OK with moderate numbers (for example jagged array of type (200)(){}) but in a situation where the array is (1500)(){} the rtb takes approx 3-4 seconds to reload when it loses focus. I was thinking of eliminating some lostfocus of triggering with this logic
On RTB LostFocus
If 'nothing was changed in the RTB' Then
Return
[code]....
Nothing was changed in the RTB means that the user Focused in the RTB, scrolled around, but did not change the content in any way. How would I achieve that codewise? In addition, is there a better way to keep the RTB updated with it's corresponding jagged array from LostFocus?
"I need to create a program that will allow the user to enter in 10 test grades from a class. I need to store these grades into an array, and use a loop to add up the total. Then I'll need to output the average, and the letter grade for the average using:
90 - 100 A
80 - 89 B
70 - 79 C
60 - 69 D
Below 60 F"
That's all it needs to do. Here is some code that shows you that the only thing I know how to do is (allow the user to enter in 10 test grades from a class.) The rest I'm so lost on and have a crappy instructor. This assignment is due tomorrow, but the instructor is not available over the weekend.
Here is my This is all I have:
Dim MyNumbers(9) As Integer
Dim Total As Integer
Dim i As Integer
[Code]....
However, it loops through does the first one .... then I have to click the button event again for it to get the 2nd one BUT THEN when I click button the 3rd time it doesnt do the third address it simply repeats number 2
View 5 RepliesI have seen and used Text.split with a single delimiter such as " ",-","-".". However I cannot find a method which allows multiple delimiters. I need to be able to split a richTextBox's text into an array list.
View 14 RepliesI'm creating an emulator for a device to simulate wave forms. My challenge is that when I try to convert the output of the following code, I can't convert the Math.Sin's double output into byte values that lend themselves to the byte array format required by an existing graphing control as listed at bottom below. I''m not sure how to handle this when the sin function creates negative values but the byte values will need to be positive and basically 'shifted up' so that anything over 127 is negative. (0 - 255) unsigned. BitConverter.GetBytes has been suggested but THIS is the result of that attempt.
[Code]....
I have a button which reads a comma separated value file and loads it into a richtextbox. Each line contains comma separated chars.
Once the file is loaded in the richtextbox, i want to be able to select specific values from each line and store them into an array.
For example:
Line1: a,b,c,d,e
I want to be able to place only the values "b" and "c" into an array.
I was thinking something like creating a menu for the richtextbox which will be triggered on right click, then highlight the values I want, press right click and select 'place these values in an array'.
it doesn't have to be the way i proposed it, but it definitely must use a richtextbox.
I'm working in Visual Basic Express 2008, and have created a little application to run a marquee to display information for our hospital, that will auto-update.
I am trying to position the form to sit flush with the top-right portion of the screen. I set the position manually, to 800,0 which does move it to about the area i'm looking for, but depending on resolution (which varies throughout the facility) it will not sit flush with the right side of the screen.
Is there anyway to set form parameters to right-align?
What I am trying to do: There are three powershell scripts with different time delays as shown below.I am trying to run them asynchronously in .NET and I followed this article to implement Asyncrhonous programming. Where I am stuck:The I am not able to retrieve output after the events are invoked.The scripts are being called but then the program ends and it shows "Press any key to continue" in console windows.I don't what I am missing here.
Info: JobRequest is a class that I use to pass around information keep track of jobs.
Sub Main()
OurAsyncFunctionCalling("psDelayScript2.ps1", "-arg1 4 -arg2 5", 1)
OurAsyncFunctionCalling("psDelayScript1.ps1", "-arg1 2 -arg2 3", 2)[code]......
I am using VB 2008 to do some excel automation and I am stuck.I am trying to make the cell alignment to be left-top. When I programmatically insert a new worksheet, the alignment defaults to "left-bottom".
View 3 RepliesIs it possible to have f.ex 1 column aligned to the left in the gridview and the rest align to the right?
View 1 RepliesI am making my own captcha image and I have it pretty much working, but I can't figure out how to align the text in the image. I tried using a stringformat, but I can't quite get it lined up right. If someone could tell me where I am going wrong,
[Code]...
I have a combo box on my form, which aligns left. I want it to align right instead. In the Properties section I can change the RighttoLeft to YES but the dropdownlist will show on the right instead of the left.
View 12 RepliesI understand there is something called a PAD command which aligns text left and/or right instead of making spaces with quotes & blanks like this: (""). Where would I put it in my code to align my words and numbers left and right?
[Code]...
I have a text file like this
Quote:
| From | To | From | To
Length|Ga|Color |(b r c )|(b r c )| X Y | X Y
[code].....
In win Xp Then text of item is center alignment , but when i go to WIN 7. iTEM IS ALIGNED TO LEFT SIDE. I only want items are aligned to center.
View 1 RepliesI'm trying to display a few words in a label control aligned right. I've tried setting the text alignment to TopRight / MiddleRight etc. but nothing seems to work and the text is always displayed left-to-right. How do I display text from right-to-left, like MS Word's "Align Right" feature?
View 5 RepliesI have a lines like this in my text file
17.0 28 Black (2 07.00 56.0) [1 17.79 60.3] 52611 -39725 188611 35775
17.0 28 Black (2 17.00 75.0) [1 17.79 60.3] 24111 30275 188611 35775
17.0 28 Black (2 09.00 61.0) [1 17.79 58.3] 45111 -25725 191611 35775
17.0 28 Black (2 16.00 70.0) [1 17.79 58.3] 31611 23275 191611 35775
[code].....
I am working on a simple program, calculating an auto bill. When I display the results I want to have some text on the left, and some on the right. I'll post the code. Basically so everything lines up, if possible. Here is what I want it to look like:
Customer: Name
Cost of labor: Cost
Cost of parts: Cost
Total Bill: Total
Here is the code:
Public Class frmAutoRepair
Private Sub btnBill_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnBill.Click
Dim customer As String
Dim hoursOfLabor, rate, costOfLabor, salesTax, costOfParts, partsWithTax, totalBill As Double
customer = CStr(txtCustomer.Text)
[Code] .....
I have read a few articles on this but none seem to help. How do I align the label and textbox in the following case:
Using frm As New frmWithTableLayout
frm.TableLayoutPanel1.ColumnCount = 2
frm.TableLayoutPanel1.RowCount = 3[code].....
I have a form that automatically goes full screen when it runs. I'd like to center align a web browser control at runtime, as it needs to have a fixed size of 720 pixels, but the form will automatically expand to fill the screen.I've tried
View 6 RepliesWhat I want to do is click a button (button will relate to a specific drawing / image) and have it appear on the cursor. I need to then 'Drop it' onto a form. Then I may need to select another button (button will relate to another specific drawing / image) and have it appear on the cursor, click on or near to the previous image and have the new image place itself against the existing on. I may choose to use drag and drop instead as the initial 'get image' command.
What I am trying to produce is an assembly building package where you can drag and drop various options onto the screen to build up a full assembly of a unit. My question is what would be the best 'work area' for this? Picture Box? or another type. I need to set the screen layout and then I can start looking at the code required for the controls.