I have AutoDragDrop enabled in my textbox. It drags the .jpg file into my program successfully. When I save it only saves the text not the .jpg file. I do realize that when I save the file I need to have the .jpg saved also and I am not sure how to accomplish this. I have checked multiple forums and googled of course. No luck as of yet.
View 3 RepliesI am using Excel 2007, VS2008 Pro.I am building a VSTO Add-in that requires "drag and drop from Excel cells to a drag-enabled task pane".So far I notice that I can only drag and drop within the cells themselves. It does not allow me to drop into the task Pane or drag past the sheet limits.(http:)[url]...
Note: The task pane has drag drop enabled, I ahve already tested I can drag/drop from task pane to excel but I need to do this the other way around?
I almost have this text editor/Stopwatch/Calculator program done. I am having mojor difficulties to get this code for Save and for Save As to work properly. I do not have code for save yet. When I click on Save I want it to save without popping up the dialog box. I do not have code for Save yet. When I click on Save As I want the popup box to show. Here is the code I have for Save As:
[Code]...
I have already done the creation of button and the dragging of button at runtime already. But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button. so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.
the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
Public Class Form1
Dim tm As New Timer
Dim Index As Integer = 0
Dim myMousedown As String
[code]....
When I run my program and save my file and name it "Ed's doc". It saves fine. But the title still says untitled, I would like it to say Ed's doc in this example.This is the code I have for my SaveAs button:
Private Sub SaveAsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveAsToolStripMenuItem.Click
Dim Save As New SaveFileDialog()
Dim myStreamWriter As System.IO.StreamWriter
[Code]...
I'm new to Visual Basic, and I'm trying to figure out how to make a drop down menu to select the font in a text editor, like Microsoft Word. Does anyone know how I could do that? I'm using Visual Basic 2008 Express Edition.
View 4 RepliesToday there are many programs witch use drag and drop
what i want is :
I want to know how i can do what visual studio .net 2008 do and next points shows what i want:
1- I want to do like the toolbox in visual studio also I want to drag controls from the toolbox to the grid which is can't see
2- and i want my program show tow or more lines before i drop the control on the form
the tow points it is same what visual studio form designer do
this picture of program show also what i want on the lift the objects witch you can drag it and drop it in a grid on the right side.
I want to implement drag and drop functionality in my program, but it isn't working. Here's the
vb.net
'I removed the code because it wasn't needed anymore ;)
I've set the AllowDrop property to true, and when I drag a file onto a program, the cursor changes to Unavailable, and I can't drop my file.
I need drop one item from one panel to another using a drag and drop feature. These items move from different cycles so need to drag and drop it into new cycle/column.
View 2 RepliesI am trying to open multiple files using a third-party program, by calling it from VB.NET. By default, the program I am using, through command line, only opens one file at a time - and if I call it again, it opens a new instance. (when started in GUI, I can drop many files on it).
Now I open it with
Shell("program file")
If the program is running, I want to add "file" on top of the running instance instead of starting a new instance.
Something like:
If Not procExists then
Shell("program file")
else
[Code].....
Unfortunately, just like Shell("program filename"), it opened lots of instances of "program", instead o loading all the files in the same instance.
I am currently working on a drag and drop project and I was wondering if there is a way to drag picturebox1 and drop it in picturebox2; that will snap to a specific location in the picturebox2?
View 2 RepliesListView Drag&Drop allow to Drag&Drop between form??
Public Class frmModule
Private Sub ListView1_ItemDrag(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemDragEventArgs) Handles ListView1.ItemDrag[code]....
Can it be drap and drop item to other form control??How to write the event when mouse up at the other form control?
hey guys i have a little app that shows pictures from the program directory .
View 1 RepliesI wanted to make a little app where you could drop a .txt file on the form and it would show the text in a textbox or richtextbox.
View 2 RepliesMy current project is making a word processor, and i would like to add the function to be able to drag an image from list view, in a dock panel of my form into a rich text box.
View 4 RepliesI have a button that if a user clicks on the button it creates a new button without the user knowing, and they can drag it to a split container, drop it and edit the button. I am having an issue where I cannot drag or drop the button onto the split container.[code]...
View 3 RepliesI am trying to make a renaming program, which I have done, but wanted to add drag and drop support. Firstly, when I drag and drop the files into a listbox they appear to be going in and are ordered randomly. I want them to go into the order they're dragged in. Secondly, instead of having the entire path such as:
D:TVThe Big Bang Theory SeasonSeason 1The Big Bang Theory S01E01 - Pilot
I want just "The Big Bang Theory S01E01 - Pilot" to go into the listbox.
I'm doing drag and drop from a list view. In my starting list view's ItemDrag event handler, I say (amomgst other things):
data.SetFileDropList(coll)
data.SetText(CurrentFolder, TextDataFormat.Text)
sender.DoDragDrop(data, DragDropEffects.Copy Or DragDropEffects.Move)
CurrentFolder being a string that holds the name of the folder represented by the list view. In the target control's DragDrop event handler, CType(e.Data, DataObject).GetText evaluates to what CurrentFolder was when ItemDrag was executed.But: e.Data.GetDataPresent(TextDataFormat.Text) always evaluates to FALSE.If I replace "TextDataFormat.Text" by "DataFormats.Text" (in both places) the result is the same. I am asking this although my code does what I want, because I feel that I should not call CType(e.Data, DataObject).GetText before I have established that TextData is actually present. So how do I properly check for the presence of the text data.
How do i Drag n Drop text file (.txt or any hoter format ,vbs,bat etc...) to a textbox in VB.NET ? Step by step tutorial with code so i can copy/paste would be nice.
View 7 RepliesI have a pop up form that contains a listbox. Right now I am telling it exactly which text boxes I want to be able to drag and drop to, but I was just told to have it drag and drop to every text box on the main form.The main form with the text boxes has a bunch of tabs on it that hold each section. Each section has text boxes, so how would I code it so they are all capable of allowing drag/drop without specifying each one separately?
This is the code from my pop up form:
vb
Private Sub txtDropIn_DragDrop(ByVal sender As Object, _ ByVal e As System.Windows.Forms.DragEventArgs) Dim DropInTextbox As TextBox = CType(sender, TextBox) Dim TextToDrop As String = CStr(e.Data.GetData(GetType(String))) 'get rid of leading " - " if there isn't 'anything in the textbox If String.IsNullOrEmpty(MainWin.TextBox1.Text) Then TextToDrop = TextToDrop.TrimStart(CChar(" -
[code]....
I insert a text box into form1. I move the mouse pointer on top of the text box. I press down on the left mouse button and begin to drag the text box. The problem is when I let go of the mouse button the text box is not dropped. it remain floating around. My only way out of this is to press the escape key which places the text bnox bak to its original location. Thinking that it might be my mouse I tested it in Power point and everything works correctly.
View 2 RepliesI'm running Windows 7 x 64 and the latest version of VS 2008.I have spent forever trying to get the following VB6 code snippet to work in a VB 2008 Windows Forms application. The VB6 application works like a charm, even on Win 7 x64.Here is the relevant (I hope) VB6 code. It allows me to select text in IE8's browser window and then drag and drop it onto a TextBox called txtLink in a very simple VB6 application.
Code:
Private Sub txtLink_OLEDragDrop(Data As DataObject, Effect As Long, Button As Integer, Shift As Integer, X As Single, Y As Single)
[code]....
I need to drag and drop to textbox from tree view. Here while drag and drop to text box i need to add the dragged text to anywhere in the text box which we have already dragged some nodes here.
For example.in treeview i have "node1" and "node2"now i am going to add "node2" to textbox and in front of "node2" i need to add "node1" and then at the end of "node2" again i need to drop "node1" like that.
I have to produce a basic text editor with buttons along the top and a richtext box below. I am currently struggling with 'Save if changes are made' objective. At the minute clicking my exit button rather than close/X (something i have to disable but havent yet) brings up the do you want to save message box regardless of any changes and also, clicking the yes button does nothing.
CODE:
I recieve no errors and apologise if i have forgotten to include something useful
I am trying to figure out a way to include the listview's tag field when dragging one listview's subitems into another listview. I am hoping someone here has experience with this. My Listview drag code is below - the two listviews that I am dragging subitems into or from are LV1 and LV3. Also, this is being done in Visual Basic 2008 and the project is a windows application.
[Code]...
I believe I need the code for Load Event. I have tried many ideas. I have searched the threads here and also google of course. No luck as of yet. Better description: I have a file named hello.txt. The contents of this text file are "hello". I use my program as the default for .txt files. I dbl click hello.txt. My program loads and the contents are blank and it should have "hello" in it.
View 31 RepliesSo I have made a text editor using rich text boxes and it is made to save/open rtf files. I have 3 issues I was hoping to get answers for...
1. Can I (and if so how) make it able to open/save text files and rtf files (so the user can choose which way to save it)?
2. I added the ability to color the words, but instead of coloring just the highlighted parts - it colors everything in the file. How do I change that so it only colors selected text?
3. I also added the dialog for Font changes, but it does not seem to work correctly. I want it to change font/size/etc of whatever is selected. Right now when I highlight stuff and then go into Font it allows the dialog box but does not actually change the font size/type/etc in the file it has open.
Here is the code for the above 4 mentioned areas...
Save...
Try
Dim dlg As SaveFileDialog = New SaveFileDialog
dlg.Title = "Save"
dlg.Filter = "Rich Text Files (*.rtf)|*.rtf"
[Code] .....
I have been searching for the past hour to try and find a solution, but I have been unsuccessful. Also, I use VB 2008, so the Common Dialog Suggestion would not work.
View 23 Repliesi have written a sub routine for a Save>Menu option for a MDI Text Editor, Please see my code below
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click
Dim f As Form2
If f.Text = "Text Editor V.2 - New Document" Then
[Code]...
i want to save String in File Who not Able to open in Text Editor Open it Only on my Application Suposly i want to save Phone Book Contact In this file
Three Text Boxes
1. Name
2. Phon Number
3. @mail Address
i already read these stuff but still not Understand i already check Kaymaf Provided link , but i m not understand Create Your Own Custom File Type