Im doing a project in which i need to take backup for the database each and every month while doing this the previous backup is replaced i dont want to replace it. every time i create backup it should remain there im using access as database?
View 3 RepliesI am trying to backup an SQL database but can't get rid of the error:"The process cannot access the file 'C:Original.MDF' because it is being used by another process" Once I open a form, using VB2008 from Visual Studio 2008, closing the form and/or connections to the database seem to have no affect.
FileCopy("C:ORIGINAL.MDF, BACKUP.MDF") ' Works prior to opening a form that uses the SQL database
frmTest.Show ' The form uses the ORIGINAL.MDF database
frmTest.Close() ' Has no effect
[code]....
I have written a piece of code for my backup. It looks something like this:
Dim con As SqlConnection
Dim cmd As SqlCommand
con = New SqlConnection("Data
[code].....
I am making a VB.NET application that can download/backup the database that is currently on a remote server. I have Remote Server IP,Username,Password and Database name. I am also able to connect to it. But I don't know what to do after connecting to it. I don't know what all files are need to be backed up. (I think database and log file both must be backed up, I am not sure).
View 1 Repliesis it possible to skip forward or backup to the previous record in a database within a Do Loop of an ExecuteReader routine? For example, with the following code:
DMDatabase01.Open()
DMCommand01 = New OleDbCommand("Select * From DB01Table01 Order By DB01F01, DB01F02", DMDatabase01)
DMReader01 = DMCommand01.ExecuteReader()
Do While DMReader01.Read = True
[Code]...
I have the need as part of a larger data comparison program to not always read the next sequential record - at some points I want to go back to the previous record, or skip forward to the next record, but stay within the Do Loop.
I have a program that when I run it, it creates two files. One file is deleted every time it runs and the other is deleted only if I specify for it to be deleted. If I do not specify for it to be deleted and I run the same execution, the program complains. I want to be able to make a backup copy of the existing file and have that backup copy set to a file number increments every time it is backed up.
This is the command line that is sent to the program: relap5(program) -i input_file.i -o Output_file.o(this one is deleted every time) -r restart_file.r(this is the file that I want backed up.Here is a image of the gui that I created that does the above run for me.
All it is is that when playing World of Warcraft people are having to clear their cache for the game to operate all the time, if they don't do this then the game bugs out in some places - so I thought of this as a way to get better at VB .NET by making a small application that asks for the directory of their WoW folder, searches through their cache folders and deletes the ones that they are also asked how they'd like to delete.I don't plan on actually releasing this in any way, I just want to make it to further my VB .NET skills and hopefully get a little better.
Anyway, it doesn't make sense much, sorry about that, but all I want to ask is if this program will work on any other computer or will I have to find a way to deploy it?Also, one thing that I thought I should put in this program is a backup function just in case something goes wrong. I just thought of moving the cache files that are being deleted somewhere else but this will move the files and folders one-by-one, is there any way I can make a certain type of file that only this program can read, where the files being backed up are placed in?
I need to create an application that will restore a user's mapped drives from a database. To do this, I need to create a script that will automatically back up the user's mapped drives on logon.
What would be the best way to go about doing this?
I have a class that exposes an auto implemented property Enabled
[Code]...
But If I had not use an auto implemented property and declared my own backing-field as follows this is accessible from the subclass: Private _Enabled as Boolean ---- EDIT ----
The abve line is incorrect - this is not possible, it was in fact Protected in the original code which allowed access from the sub class See @JonSkeet answer ---- EDIT Of course I can just access Enabled from the sub class to work around this but can someone explain why this is the behaviour?
I am wanting to copy a folder to a compressed archive like a zip and then, How would I go about doing it? Do I need to call winzip or something? If so would it look something like...
Try WinZip(FoldePath)End Try EDIT- I was also wanting to add .bak so it would be C:Test.zip.bak, or is there a better way?
I have code on log in form but it only get the latest data on username and password column on my database
Here is my code
Public Class Users
Dim MyLogIn As New myRecords
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
[CODE]...
This is my connection:
Imports MySql.Data
Imports MySql.Data.MySqlClient
Module myconnect
[CODE]...
This is my record:
Imports System
Imports System.Data
Imports MySql.Data
Imports MySql.Data.MySqlClient
[CODE]...
I recently upgraded the MS SQL Server installed on my personal computer from 2005 Express to 2008 Express. Problem is when I try to add an SQL database file to a project using VS 2005 I get an error message saying that the version of my database server is not supported, I must have SQL Server 2005 Beta 2 or later installed. I didn't do it yet but I'm pretty sure that when I open the other projects that I included a database file to it, I'm going to get the same error.
My question is it possible to have two SQL Servers installed on my machine? If so, is it a good idea to have two DB servers in the same machine?
I want to move my programs and the database to another computer and hard-disks. It looks to me as though I nearly have to re-create the controls and rewrite some of the code to make it so the programs still work after the move. At least with ODBC all I would change was the DSN definitions external to the programs. Is there an easy way to move or rename a database without loads of work?
View 3 RepliesThis program is very difficult for me, but I must get threw it or I cannot finish... What I am doing is making a Database of foreign Languages with the spelling of the words and the pronounciation inside the database... The USER enters a paragraph of words into the translator textbox and pushed translate. The program has a DATABANK of words with the phonetic spellings and matches the word, then translates to phonetics. The problem is that new words keep appearing inside the language. So I incorporated a Database of 2 fields
[Code]...
When I am developing an application and I use the 'Data Source' tab to create a database, will that database be automatically created when I use the software on another machine?
View 1 RepliesI'm trying to use LINQ to SQL in Visual Basic 2010 Express.
It allows me to create the .dbml file, but in order to drag items from the Database Explorer window to the design surface, I first have to get my database listed in the Database Explorer!(this is a remote SQL Server database - not a local .mdf)
I already have a good, working connection string to the remote SQL Server database, but that doesn't help me when I'm trying to generate the DBML at design time.
Can anyone tell me how to get my remote SQL Server database identified in the Database Explorere window? When I try the "Add Connection", I am limited to Access, SQL Server Compact, or SQL Server Database File. If I try to enter the IP address & port of my DB Host I get a 'database file does not exist' message. Doesn't seem to want to let me point to a remote DB server...
In vb.net I am using password protected database with following connection stringconnetionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:vaivaiDB.mdb;JetOLEDB:Database Password=secret;"Database access works fine on the development machine.
View 2 RepliesWhen I install my application, some forms are unable to connect to the database.
I say some because, when my login form works totally fine. Authentication happens.
But once I go into the main application, and open other windows, I start to get these error mesages:
[URL]
Friends I have Developed my Data base Project on vb6, using adodc and datagrid using ms access database file, it was working nice in vb6, I also put Search box there and used adodc1.recordsource="select * from table" sql query.
later i needed to convert it in vb.net I converted it, every thing is working fine, but one problem appears, an adodc's Recordsource query for searching records is not working, it only works if there is data in dataset (Datagrid),suppose once i pressed search button to search record and if no record found then dataset / datagrid becomes empty, now i wanted to search an other record with other name, but this time it does not work and following error appears Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.
[Code]...
I am sitting with a situation that I have to combined (3 years) for 26 site of 29000 database files where there is 1 table in each data base called RECDATA, I need to combined all that data Into one database file called RECDATA.
For example there is a database called DB1 with a REDATA table inside it, and then DB2 with a RECDATA table inside it, DB3 with a RECDATA table inside it est. So I need to put all the Recdata into 1 Database file, or to copy all the RECDATA from all the database files to 1 RECDATA they all have the same columns All I need is to get all that data into 1 RECDATA table.
The program where this database comes from is a voicerecording system creating a new database every day. There is 1 database just for indexing (to view the recordings) and then the daily database is where the recording lies in, that Colum is called RECFILE. I will give you a example of the 2 database.
I have a report made in Crystal Reports XI. The report is generated and exported to PDF in visual basic script using COM interface. Generally everything is running smoothly, but in one case generation breaks with error: Failed to retrieve data from the database. Details: [Database Vendor Code 9421]
Database used is MSSQL 2005 connected over ODBC to CR XI. When I am opening report with exactly the same parameters in Designer, everything works fine.It looks like it is data related, but it is hard to trace since the whole report is pretty sophisticated. Anyway I spent half a day on crawling over Dr. Google and it seems that he has no clue what might be an issue.
I have VS 2005 installed in my sytem fyi.We have two databases, say source database and destination database. The databases is in Oracle. Now we need to pull data from Source database, manipulate it and push it into the destination database on daily basis.We are planning to use VB .Net for this and would like to know if this is feasible. Using windows forms through VB .NET, is it possible to create a exe and schedule the exe on nightly basis to pull the data from source to destination.how to do this as for manipulation of data, there is no intermediate database for us?
View 1 Repliesi need to make a database application that can write/retrieve cells/datasets from/to a database i buyed a book in there was an example of how to create a database application while debugging i had the "Object reference not set to an instance of an object." error and it highlighted this code
objDataRow = objDataSet.Tables("KlantenTable").NewRow
now the problem is here i declare something later in the code i write to it
objDataSet.Tables("KlantenDataTable").Rows.Add(objDataRow)
[Code]....
can anyone teach me how to save data in microsoft access database and retrieving it back from database?[code]so, how do i save it in that and how do i load their data by typing their ic no only..
View 5 RepliesI have created an access database which i want to search with vb.net, I tried a few thing but it didnt work as desired.
Firstly the program is suppose to display items in the database base on the criteria selected by the user. what i've succefssfully done so far is I've added a datagrid 2 combobox, 1 (searchcbo) with the columns in the database and the other (searchcbo1) will autoload the items under the column selected in and a button (searchbtn) but i have no clue of the code to put in the button. i also tried the fill method but that didnt work as i wanted to. ultimately i want a combobox with the list of columns and a textbox to enter criteria and of course a search button.
The searchbtn should act as the "WHERE" sql command, e.g. SELECT EmployeeNumber, Firstname, LastName, Phone, Location....etc FROM CallLog WHERE searchcbo.text = searchcbo1.text And display the results in the datagrid.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'CallLogDataSet.CallLog' table. You can move, or remove it, as needed.
Me.CallLogTableAdapter.Fill(Me.CallLogDataSet.CallLog)
[CODE]....................
Attached image(s)
Ive created one database Sql Server Compact Edition 2005, with one table ("Cliente") I know that I can created my database good, but i have a problem saving information since three textbox, in my table(With columns "Nombre" "Apellido" "Cliente". In my form there is a button save ("Guardar"). When I do click in my button appear the next message : "The column cannot contain null values. [ Column name = Nombre,Table name = Cliente ] " and happen the same with apellido and Id_Cliente. And this happen becouse my code cant save the information....
This is the code
Option Explicit On
Option Strict On
Imports System
Imports System.IO
Imports System.Data
[CODE]...
And the code for my button is:
Private Sub cmdguardar_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdguardar.Click
Dim myconnection As SqlCeConnection
Dim mycommand As SqlCeCommand
[CODE]...
I did the following
Imports System.Data
Imports System.data.OleDb
Public Class Form1
Dim con As OleDb[code].....
By this i can fetch only one row(the last row) of the access....how to modify the above code to fetch all the rows starting from the begining from the database..........
[code]....I have a dialog that comes up and asks for a reason for declining the business.I don't want the code to move on after not enabling the "me" until the reason has been entered and saved into the database. Also, at that point where it says "I WANT...." I want to copy the textbox fields into a new database and then delete this entry from the database, how can I do that. I am using VS 2008 and SQL.
View 2 RepliesI am using the tutorial posted here for my database testing. I have gotten it to display the data using a messagebox but it just goes through them 1 by one. I want it to display all the data from the database in a table on my form.
Using connection As New SqlClient.SqlConnection("Server=71.200.87.112MySQLExpress; Database=database_test;User ID=sa;Password=greddy6;Trusted_Connection=False;")[cod
I created a dataset and i am using OleDbDataAdapter to insert new values to access database. But when i close the program and after open it, values are not in the database. How can i solve this problem? Also, i have another problem. When i write codes that
[Code]...