Calling Class (When Include Excel Automation) From Button Object
Apr 7, 2011
I am messing around with some Excel Automation just to get my feet wet and want to call some specific cells in my spreadsheet just for testing. I have one form in the project including a button. My question is how do I tell the button where to navigate to the cell to be tested?
My code for my Excel class is as follows:
Public Class Waybill
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim oExcel As Object = CreateObject("Excel.Application")
Dim oBook As Object = oExcel.Workbooks.Open("C:\TesterXL.xls")
[Code] .....
View 6 Replies
ADVERTISEMENT
Jan 22, 2010
i am developing one automate application for tht i hav done some coding i dont know how to proceed further can any one guide me if possible? [code] I am using SHDocVw for IE. Now i need to know how to do. [code]
View 4 Replies
Oct 6, 2009
I'm trying to upgrade a VB6 app to VB 2008. I have read the article in the tutors corner about automating Excel from VB but I cannot get it to work. Heres what I have done:
1) set a reference to the Microsoft Excel 12.0 Object Library
2) Added "Imports Excel = Microsoft.Office.Interop.Excel" to the top of the module
3) in a routine I have added: Dim X As New Excel.Application Here's where I get an error: Error 75 'Application' is ambiguous in the namespace 'Microsoft.Office.Interop.Excel'.
View 6 Replies
Aug 3, 2009
I use the following code snippet
Dim exlapp As New Microsoft.Office.Interop.Excel.Application
Dim xlWorkBook_new As Microsoft.Office.Interop.Excel.Workbook
Dim strOriginal As String
strOriginal = Server.MapPath(Request.ApplicationPath & "/Attachments/") & "abc.xls"
xlWorkBook_new = exlapp.Workbooks.Open(strOriginal)
The code hangs in the last line. It works fine in the development environment. i deployed in windows server 2000 ,where I get this issue. the browser goes half way and throws the below exception after some time
[Code]...
I have set the identity impersonate to true in web config. This should be mostly an access rights issue.I have even provided access rights for the "everyone " user in the excel file and as well for the interop component. Please post ur valuable comments.
View 3 Replies
Mar 11, 2009
following error message:
Method not found: Void Excel.Range.set_Value(System.Object,System.Object)
View 4 Replies
Jan 6, 2012
I have 2003 xls file which is saved on a web share point. File combines vbs functionalities, of which one is uploading data to this file (from another file on the same share point) by clicking command button.When I open file from my location it all functionalities are working without problems. My customer is running it from his location, he is also using Excel 2003, the moment he wants to upload the data he gets the bug.
Message: Method "Worksheets" of object "_Global" failed
I checked and it seems that in the references he has 10.0 object library and I have 11.0 What i can do to unify the coding so it is indifferent from Object Library version?I have read about late va early binding, I guess i'm using late binding I also check that i can adjust late binding buy standard codes.
Dim oExcel As Object
Dim oWorkbook As Object
Dim oWorksheet As Object
[code]....
View 1 Replies
Aug 29, 2011
How can I access the values stored in a session object with a class in asp.net?
View 3 Replies
May 4, 2012
I want to see if there is a way to do this... I'm Using vs2010 with the WP7 SDK. (VB.NET)
I am declaring this in the global scope.
public objGame as object then say i have classes: Game1 and Game2 for the sake of the example we'll just say both classes have an Update() function
I want to set objGame = Game1 (or Game2) and then be able to call objGame.Update()
View 3 Replies
Jun 10, 2009
I have used Visual Studio 2008 (VB) to create a custom tab and button group with custom buttons. When any of those buttons are clicked, I simply want to run a macro (add-in) that will already be loaded when Excel is launched. The main examples I've seen create an Excel object in the VB code and then call the macro, but that seems like unnecessary overhead, since the custom buttons are are already loaded into Excel.
[Code]....
View 5 Replies
Feb 24, 2011
I want to call the class radiostate by a button click on a form..Is this possible.. or should I rephrase it to say I want to call a function inside a class... either way im stuck.
View 3 Replies
Jun 3, 2011
i have cracked my brain to figure out on how to use if else statements in form1 to call button.click from another class.
View 14 Replies
May 28, 2009
I am developing an application using excel automation.The worst thing is the client's side doesn't have excel installed.What is the solution for this case?
View 17 Replies
Jan 25, 2011
I have written an automation addin in Excel with C# (addin.dll). To use the addin, I need to 1. register it using "regasm /codebase c:...addin.dll"2. select in ExcelOptionsAddInsExcel AddinsAutomation the respective addin from the list
I would like to automatize 1) and 2), so that the user just needs to run an exe-file in order to use the addin. 1) should be no problem, but how can one automatize 2)?
View 12 Replies
Apr 20, 2010
Ok basically what I need to do is the following:Read FirstExcelDoc (attached)For every row in that: Retrieve data from sql server db based on info in the Orange columns of FirstExcelDoc Let's say I retrieved data elements A, B, C, D, and E from sql server. Then I need to enter those same data elements A, B, and C in another excel spreadsheet (which has formulas etc) After inputing A, B, and C in that spreadsheet, read a couple of calculated fields and compare those results to data elements D and E retrieved originally from SQL Server DB. Finally, output the results in the Blue columns of the FirstExcelDoc spreadsheet for that row.Loop through and do the same thing for row 2 of the FirstExcelDoc and keep on until you see "END TEST" in the FirstExcelDoc.
I'm looking for a method of doing this efficiently. I have read several articles over the past few days as well as those from Mike R. but just need some direction to get started on this.To start of I'm looking for whether to read the entire FirstExcelDoc spreadsheet or just read the info for first policy number(2nd row) and process it and write out the blue column info for that row and then loop through and come back and read the second policy number (3rd row) etc... Please attach a code snippet for either way of reading the data.
View 19 Replies
Jun 17, 2009
I'm using excel via interop in application.Sometimes users kill application that created excel instance and that results in excel instance sitting in memory without any chance of disposing it.First I tried to tackle this using ROT(running object table) looks like not all instances of excel are registered there.Than I tried to somehow mark excel process after it is started via interop.[code]This works as long as excel is visible but in my case excel window is invisible.All I need is to somehow mark process that started via automation with the parent PID, so that later I can kill it if parent does not exist.
View 19 Replies
Jan 21, 2012
I've got VS2008 and Office2010, but I don't have Office2007. Therefore, I have the Word14 Object Library but not the Word12 Object Library. Will the code that I create for Office2010 automation also work where clients only have Office2007 or will they have to upgrade their office suites?
View 1 Replies
Dec 17, 2010
I have been pulling my hair out trying to fix this.
[Code]....
View 1 Replies
Jun 1, 2010
We have a vb program which is run on our server by scheduled task every day. The program opens about 30 excel files, refreshes the data connections, pivot tables and then saves the document in another location.
This may run fine for a couple days but sooner or later the process starts crashing, usually with this error: RPC_E_SERVERFAULT.
My question is, Is it expected that continually opening/closing/refreshing workbooks will inevitably cause the Excel object to crash at some point.
View 3 Replies
Sep 25, 2009
I'm having an issue where my excel.exe process doesn't close until I close my .net application. I'd like to avoid using Process.Kill() if at all possible.
Code:
Private Sub WriteRowsToXls(ByVal rows As DataRowCollection, ByVal xlsPath As String, ByVal showStatus As Boolean, Optional ByVal AddTotals As Boolean = True)
Dim xlsApp As New Microsoft.Office.Interop.Excel.Application
[CODE]............
This method references a couple of other methods I use for repeated formatting tasks, I'll include those methods below. (I added the FinalReleaseComObject into the other methods after reading Mike's thread but the issue persists)
Code:
Private Sub SetRangeValidation(ByVal rng As Range)
With rng.Validation
.Delete()
[CODE]..............
Method SetRangeAllBorders does about the same as these other methods but my post is too long to add it. The only other things not shown in these code snippets are a few string variable that are defined in the class, studentWS, studentsWSPW, paymentsWS and paymentsWSPW My App creates an instance of the class, loads some data, runs the method above, and then sets the class to nothing. I'm using .NET 3.5 automating Excel 10
View 2 Replies
Oct 8, 2010
Our software vendor provides an OLE Automation Interface in her Windows software. According to the documentation the interface can be used for using the software programatically from within all applications that are compatible with Windows scripting including VB scripting and programming environment such as Visual Basic. A VB script sample script is also provided.
[Code]...
View 7 Replies
Jul 1, 2010
Given vba's fairly lamentable image manipulation abilities, I'm considering going down the VB.NET form route. My hope would be to allow some degree of interactive manipulation and then either pass the image back to vba or save it and load it in vba.I'm happy to investigate the latter part of it at length under my own steam - however, I'm not versed enough in VB.NET forms to know if calling them from (in this case) Access VBA is a practical or doable - and whether it's possible to pass data back and forth.
View 9 Replies
Feb 24, 2012
I am writing a program that loops through all of the sheets in an Excel workbook and saves each sheet as its own workbook. It turned out to be a bit trickier than I expected, since the Sheet.Copy method creates a strange object (see here for the MSDN discussion that I believe is relevant: [URL]. Anyway, I found a Stack Overflow post [URL] that got me to where I am, which is essentially complete, outside of one hanging EXCEL.EXE process that is left after the program completes, which I believe is a result of the sheet.copy method creating a new workbook (potentially a new application as well?). The other thing I run into, which I believe is related to this, is that even though I have my application set to visibility off, when I run the program, excel still opens up and is visible going through the steps.
Here is my code:
Code:
Imports System.Data
Imports System.IO
Imports Microsoft.Office.Interop
[CODE]...
Now I think the problem comes from the end of the loop, where I try to close the export file and the new worksheet it creates:
Code:
'close excel and release com objects
System.Runtime.InteropServices.Marshal.ReleaseComObject(exportsheet)
exportsheet = Nothing
xlApp1.Workbooks(fileNames(counter - 1)).Close(False)
I can't figure out what to do to release the `ComObject` for the new worksheet that is created. I have been trying all sorts of things, but it always throws a COM error when I do it and if I try to define it as nothing (like I do with exportsheet) is says that it is read only by default, so I can't do it. It seems like it should be something as simple as: System.Runtime.InteropServices.Marshal.ReleaseComObject(xlApp1.Workboo ks(fileNames(counter - 1))) But that is not the case. I have tried a few variants of this and I am thinking it has to do with the MSDN link above, but I can't quite sort out what to do. So the code works for my purposes, outside of leaving one EXCEL.EXE after it is done. As far as a test file, I am just using an Excel file with 3 sheets and I put some information on each and change the sheet name, so it is easy to see if it is working or not.
View 1 Replies
Jun 15, 2011
We have a VB 2005 program that reads data from a database and builds an Excel output file to be emailed. This works fine from my computer but when we put it on the server it fails on the Excel functionality.
The error is: Unhandled Exception: System.Runtim.InteropServices.COMException
Although Excel is not installed on the server we did also build a Setup program to install our program. It copies the Microsoft.Office.Interop.Excell.dll to the server folder with the exe.I thought the setup program should register the Excel DLL and the program should work even if the server does not have Office or Excel installed.
View 3 Replies
Aug 6, 2011
I want to include Arrary of Class in a class. For Example
Public Class AddressSet
Private addressValue As String
Private effectiveDateValue As Date
[code]....
my goal is let the user add address maximum 10 addresses under one name How do I implement "Property" to have array AddressSet using array index?.
View 9 Replies
Nov 11, 2010
I hope the question makes sense, anyways. I'm looking to know if in VB.NET, when we call an object's constructor, is there some kind of a reference that points back to the caller? I'm interested because of a corner case where I want the object being created to first be able to validate the existence of some data in the caller before it allows itself to be created. If this validation fails, I plan on throwing an exception. This corner case will never happen at runtime unless the object being created is used improperly by a programmer. The object being created is not inheriting the object I want it to validate, so I can't do anything with the MyBase qualifier.
It's bit of a "future-proofing" issue that I have a (bad) habit of doing. Not critical -- I can always leave stern comments behind as a last resort. Wanted to know if this was possible.
View 3 Replies
May 13, 2011
Example:
Two files - TestClass.vb, myForm.vb
TestClass.vb looks as follows:
Imports System.Threading
Public Class TestClass
Private myClassThread As New Thread(AddressOf StartMyClassThread)
[code]....
The result:Application runs, no errors or exceptions.Displayed is the listbox and the Start button.I press the start button and a msgbox says "Not Invoked" as expected and upon clicking OK to that msgbox "Start Button Pressed" is added to the Output listbox control.Immediately following that the msgbox pops up again and says "Not Invoked". I was expecting "Invoked" as a separate thread is trying to use the Output listbox control.Of course this results in the Output.Items.Add being attempted which results in no visible result as the thread is not allowed to directly update the UI control.
View 1 Replies
Jun 13, 2012
I call the function GetDataTable and when it gets to the return line, I get the error message: Object reference not set to an instance of an object.
Dim DB As New DBConn
Dim gd As New DataAccess.GetData
Dim DT As New DataTable
[Code].....
Updated. I'll see if I can update with the DataAccess.GetData code. I didn't originally put it in there because our shop use it all the time and have no issues with it.
View 1 Replies
Jun 7, 2010
I am utilizing a centralized class object that needs to call another class object. The program itself will do something like the following
sFieldValue = CentralObject.ObjectHandler(1, TestFunction, "FunctionVar,FunctionVar2,FunctionVar3")
In the central object I have a function
Public
Function ObjectHandler(ByVal ObjectType
As
Integer,
[code]....
View 5 Replies
Jul 10, 2010
I am somewhat new to object oriented programming and am attempting to flatten a Linq object hierarchy by using a shim class.how to initalize a derived class with property values from a base class?I have two objects, a base object with about 100 properties, and a derived object which inherits from the base object and adds a few additional properties beyond those of the base object. My simple constructor creates the derived object, but I am looking for a way to initialize the derived object properties with values from the base object.Right now I am using reflection to iterate over the properties individually and I suspect there may be a better way. The following example shows my shim class constructor for the derived class, and two properties:
newProperty1 - a new string property of the derived class
flattenedProperty2 - a new string property of the derived class, copied from a 2nd-level object of the base class
Code example:
Public Class derivedObj
Inherits baseObj
Private _newProperty1 As String[code].......
Is this the correct constructor approach to flatten the object hierarchy using a shim class? My second question relates to initialization of properties in the derived class. The constructor above creates the derived object, but what is the best way to initialize the derived object properties with values from the base object? The following code uses reflection to iterate over the properties individually, but I suspect there may be a better way.
Code example:
' property names are in the string array fieldNames
'baseObjQuery is an ienumerable of baseObj
'derivedObjList is a list of derivedObj[code].....
Is there a simple way to initialize values for the properties in the derived object based upon the values of the common properties in the base object?
View 7 Replies
May 21, 2010
I am trying to build a class that includes an array so that I can refer to each element in the array. For example, let's presume I'm building a class that includes student id, student name, and then an array of 8 courses (numbered 0-7). I'd like to be able to refer to:
baseClassName.Course(0)
baseClassName.Course(1)
etc...but I know that's NOT how it's done...but how IS it done?
View 7 Replies
