I edited the development copy of a cherished program beyond restore by CTRL+Z, the original version which I want to recover is already published and it is in the c:/deploy folder but I dont know how to open such files for editing. How can I open this deployed program to edit and add some methods. I was cautious enough to save the program before editing but I was suprised that the original was over written by the edited copy.
View 7 Replies
I made a project that open pdf files in the debug folder. But when i am trying to publish it program runs but can not open pdf because the published folder doesn't contains the pdf files. How can i publish my project with all the pdf and swf files?
View 12 RepliesDear Expert, Why firefox browser always try to open my file after I published my VB application. This things happen in VS 2008? If anyone out there has the same problem like me. I have this problem since I installed firefox. If firefox has a problem with its browser when we use Microsoft Visual Studio? Do I need to set anything in my VS 2008 to avoid this thing happen?
View 10 RepliesI wrote this VB program to be able to throw a device we developed into programming mode where we use an ATMEL Flip installer to upload new firmware. I can program one device after another running the application off of Visual Studio Express 2010 or Visual Studio 2010, but when I go to publish this file and run it on another machine, it becomes unstable and crashes after each upload. On those same computers if I run the raw unpackaged program under Visual Studio Express, the system does not crash, and I can program devices repeatedly.
View 5 RepliesI've been using a piece of code I found that reads in joystick movement into my VB application using DirectInput. Building an executable works great, the program operates as should be, however when I publish my program for final deployment[code]...
View 10 RepliesI'm using a dll in my program, it works fine. But when I publish and try to run on another machine, it says the dll is missing.Am I right in saying that I need to add it to my references, with the Add button on the references page? When I do that, it says it's not a valid assembly or com component.
How do I fix this? My level of knowledge is very low, especially with dll's.
i got a big project really big one and they need this new solution only because of peach tree, tally are not enough for doing their work. My program should be capable of bulk, multiple data transfer and usage at same time.The real problem is their main program is created 10 years ago in foxpro and they update it every month.!!the reason for they still using that old one, just because of it is highly flexible ! They really looking for a flexible program that can be changed settings instantly.
[Code]...
I included (as its a property compnay) photos, MS word docs and exel docs by creating links such as ths one:
Private
Sub
Timer1_Tick(sender As
[code]....
when i publish the program and export it to another computer these links fail and the pgm crashes.
I have written a very simple program to simulate the operation of some electrical relays which respond to buttons pressed on a form.The important thing in the program is the pick and drop times of the relays so I use about 40 timers to simulate the operation
of the relays each stimulated either by another timer or the operation of a mousedown operation over an area of the window which has a GIF background.
The program works great when simulated within VB2010 Xpress but when I publish and install on either of my 2 laptops it freezes and does not respond to the mousedown procedures. It seems slightly better if I don't enable XP visual syles but still does not respond enough to be used. I am running 12 procs each time a continous timer runs out but altering the value of the timer does not make any difference. I've also noticed if I minimise the window and reopen the window it does move on slightly but still never responds to the mouse.
Also the timers in the program for the relay times seem to work at strange values and not those set sometimes? It seems to work OK on my main PC if I install it
In the past I have written VB6 and VB NET 2005 programs that are installed and on the user's computer. This had to be done because the salesmen in our company have has a set of local data on their laptops so that they could do work and not be connected to our network. I would then sync the files when they connected to the network. (This same program is used by the rest of the company as well, but everyone else uses network data.)We are now at the point where we are not using any local data. Our salesmen access our network data using an iPad, VPN, and a Citrix server, which works fine
View 2 Repliesrecover a program from published files saved on a website?
View 2 RepliesI have been teaching myself to code in VB 2008 express so please excuse this question if its truly noob. :)I have built a simple database program to record my clients details in window forms...1: I created a database and connected it to my project by using the Data Sources "Add New Connection" function2: I have a add client page - I added the fields by dragging the table onto the form after setting it as "detail mode" in the Data Sources box3: I also have a Search Client page - I added the client table by dragging it onto the form in "Grid mode" then added queries to be able to search the table.
ERROR I GET:
Unhandled exception has occurred in your application. If you click Continue , the application will ignore this error and attempt to continue. If you click Quit, the
[code]....
I've been using a piece of code I found that reads in joystick movement into my VB application using DirectInput. Building an executable works great, the program operates as should be, however when I publish my program for final deployment, I get the following error:
"WindowsApplication has encountered a problem and needs to close. We are sorry for the inconvenience."
Here's some of the error details:
EventType : clr20r3 P1 : windowsapplication.exe P2 : 1.0.0.0
P3 : 4c0f1ae6 P4 : microsoft.visualbasic P5 : 10.0.0.0 P6 : 4ba2183b
P7 : 88 P8 : 8 P9 : system.io.fileloadexception
And then a second error pops up shortly after:
AppName: windowsapplication.exe AppVer: 1.0.0.0 AppStamp:4c0f1ae6
ModName: kernel32.dll ModVer: 5.1.2600.5781 ModStamp:49c4f482
fDebug: 0 Offset: 00012afb
The errors only occur once I try installing the program and just before the application loads.Here's the code for the program:
Imports System
Imports System.Windows.Forms
Imports Microsoft.DirectX.DirectInput
Imports Microsoft.DirectX
[code]....
When I publish my program I get no errors, and then when I install it on another machine it says it gives me the error that it can't read the txt file that it stores data in. If I hit continue it also fails to read the database. The database file is stored in the bin/debug folder and I told my program to include it when I first added the data connection. Anything I can do to have these included so my program can run on other machines?
View 6 RepliesI have updated a VB 2008 Winform program and published it on a shared folder. The customer can no longer use it because, at launch time, it claimed for SQLServer.Diagnostic.STrace v 10.0.0.0, what it did not before. The only thing I can think at is that I have also recently installed VS 2010 on my PC. Does it change the way VS 2008 work ? How can I solve this issue on the customer PC ?
View 2 RepliesI am trying to open a existing excel file from VB 2008
I am doing next:
Dim ObjExcel As EXCEL.Application
ObjExcel = CreateObject ("Excel.Application")
objexcel.Workbooks.Open Path
I get and error saying that is old format or invalid type library
how to open an existing excel file from VB 2008.
I cannot figure out the declarations to write to an excel file that is already open.
I open the excel file and make it visible with this:
Private Sub Button1_Click
Dim objExcel As New Excel.Application
Dim objWB As Excel.Workbook
[Code].....
I have made a text editor in vb2008 and I need it to get it open a text file when I double click it in windows explorer
View 6 Replieshere is a copy of my current code. Am trying to open an existing Excel spreadsheet then retrieve the old balance data refigure the new balance and store new data into the spreadsheet. Am I on the right tracK, or way out in left field?
Private
oWB.SaveAs(
"Checkbook.xlsx") Nothing
oWB.Close()
[Code].....
I was looking in this [URL]
I want a program a very simple program, a software that will let you enter a name and then you click "Create". This will create a program and when you click it it will show "Hello! *the name*"
I new in vb. Currently im using vb2008 to run a program.Dim notepadID As Integer = Shell("C:\Program Files\Motvik\wwigo\wwigo.exe", AppWinStyle.NormalFocus)This is the code is use but it keeps show "file not found exception was unhandled.
View 2 RepliesI am trying to convert a program for VB6 to VB2008. In VB6 I have the code below to load a database field into a variable.
The database = Local MS Access MyDatabase has a table in it called CoInfo which has a field CustID that I need to put in a variable gCustID.
This code works greatin VB6 but I can't for the life of me figure out how to accomplish this in the Visual Basic 2008.
Dim adoCon As New ADODB.Connection
Dim adoRec As New ADODB.Recordset
Dim MyPath
[Code]....
Published VB program will not run on another computer yet works fine on the computer the program was written on. Message window during set-up on the other computer reads "Cannot download the application. The application is missing required files." The set-up file is being run from a flash drive.The entire error summary is included below. A recurring line in the error message summary is "+Downloading file:///C:/Documents and Settings/username/Desktop/Application Files/filename_1_0_0_6/filename.exe.manifest did not succeed."The word "filename" is the name of my program. "username" is the computer's owner.Interestingly, the "manifest" file on my computer is kept in C:UsersusernameDesktopApplication Filesfilename_1_0_0_6filename.exe.manifest" I'm running Windows7; the other computer is running Windows XP.How do I get my program to run on another computer?
PLATFORM VERSION INFO
Windows
: 5.1.2600.196608 (Win32NT)
Common Language Runtime
: 2.0.50727.3625
[code]....
I am making a program for me and I told my friend about it and they said that they would like to test it. The only problem is that they don't have VB2008, and there seems to be no way to compile my program so that another person WITHOUT VB can use it. Does anyone have any tips, or perhaps I'm missing something? Let me know ASAP
View 2 RepliesI have a 4 table database and need to query at least 2 tables (the single table query works fine). The output goes in textboxes / labels on an existing form.
I'm trying something like this:
Private
Sub AddCustomer_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
I decided give up vb6 and begin use vb.net.And I'm going to update my old vb6 code.I used write a vb6 program to update my program.it's a simple program:I have a webside,I put a file in the webside,this file it's just a document(.txt),only include version number.my program use "inet" download this file(address like this [URL]and compare the version number,if this document number it's bigger than this program number,than told user you need update your program.like this:
dim ver as string
ver=Inet1.OpenURL(http://www.sample.com/info/ver.txt)
[code]....
But,In vb2008,I don't know how to write those code.I search the local MSDN,it said I can use:""my.network.download" to download files,but it's only can download a file and save it as a file,I want to download a file and save it as a variable(type is long),I don't know how to write those code.
I want to write a program that if ping www.microsoft.com is success,than caption title it's "ok,connected Internet",if ping it's failed,the program "caption" title is "sorry,not connected",but I don't know how to write those code
View 10 Repliesi am trying to use the sleep command in vb 2008 multiple times to constantly change back color but am told, Unable to load DLL 'Kernel 32': The specified module could not be found. (Exception from HRESULT: 0x8007007E). i tried it with another program and one sleep(1000) and it worked so is there a way to use this multiple times or any other command.ian hendry
View 7 RepliesI have a PictureBoxMain on my form. I have 6 buttons. When I click a button, I want the picture box to display an image that relates to the button I've clicked.
Public Class FormPipe1
Private Sub ButtonBranch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ButtonBranch.Click
[Code]....
When i run the program everything works fine. I want the textboxes to keep the data in them till the next time i run it. Right now when i shut it down (with data in the textboxes) then start it up i have lost all the data.
Heres my code
Private Sub TextBox2_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox2.KeyPress
'Numeric values only
If Not Char.IsNumber(e.KeyChar) And Not e.KeyChar = Chr(Keys.Delete) And Not e.KeyChar = Chr
[code]...
