Change Data Source For Forms?
Jan 27, 2009
I have a two forms with about 25 bound controls on each in the same solution. All of the data for both forms is in the same SQL table. I need to filter the data and only get the data appropriate to the called form. I consulted an University VB professor and he would only say "it won't be easy".
I tried removing all of the bindings and rebinding them to the new datasource but there were still some remnants (probably from the navigator) that proved illusive.
Is the only solution to recreate the VB forms and bind them to the new datasource?
(using Visual Studio 2008 Professional)
Private Sub HazMatlLabelsBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles HazMatlLabelsBindingNavigatorSaveItem.Click
[Code]...
View 1 Replies
ADVERTISEMENT
May 15, 2012
I have two comboboxes. The data sorce of combobox1 is a list of string that is fixed.Combobox2's data sorce will be a list of string that depends on the selection of combobox1. This is very similar to a common case as follows: first enter your contry, then depending on your enter, the second combobox will show you the list of universities in the country.
'Change selection of first combobox
Private Sub cbxClient_SelectedIndexChanged(sender As Object, e As EventArgs) Handles cbxClient.SelectedIndexChanged
[code]....
View 2 Replies
Mar 25, 2011
I had built an application such like items management, I used two table in two different database in two different engine server, the stack is, when I want to make event for add new data, how I can make the event for the combobox ID for switching it's datasource from before.. for the knowledge, the first table is Xtable, database is Xdatabase and the machine is Xmachine; and for the second one is : table is Ytable, database is Ydatabase and the server machine is Ymachine...
View 1 Replies
Jan 25, 2010
i have a code which has the connection string as driver. dim s as string = "Driver={SQL Server}; Server=xxxSQLEXPRESS; Database=dbRegister; Trusted_Connection=yes" i need to change that to - "data source=1.2.3.4;user id=xx;password=xxxxx;initial catalog=xxxxx;Connect Timeout=30" when i just change the text it gives this error - "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified" how do i declare the datasource?
View 2 Replies
Sep 20, 2011
i have a code which has the connection string as driver.dim s as string = "Drr={SQL Server};Server=xxxSQLEXPRESS; Database=dbRegister; Trusted_Connection=yes"i need to change that to"data source=1.2.3.4;user id=xx;password=xxxxx;initial catalog=xxxxx;Connect Timeout=30"hen i just change the text it gives this error -"[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
View 13 Replies
Nov 16, 2009
Is it possible to change the data source of a dropdown list in a gridview from another dropdown list selected index changed method in the same gridview?
for example I have a dropdown that needs to change its contents depending on what is chosen in the previous cell of the gridview, which is also a dropdown list.
View 3 Replies
Aug 7, 2011
I want to change the source data for my pivot table in Excel using VB.Net to a named range.
I have : table.ChangePivotCache(wb.PivotCaches.Create(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=sheet.Names("name_of_NamedRange").RefersToRange))
Exception : The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
View 2 Replies
Nov 11, 2010
I'm using a MS Access 2007 database. I modified the field definition of one of the fields in a table, it a text field and I change the maximum length from 40 to 150. I have a data source in my app that contains this table and many others. I refreshed the data source but the change didn't take affect. I went through configure option but the change still didn't take affect. It gives me this error,
The value violates the MaxLength limit of this column.
If I add/delete a database field the data source is updated when I go through the configure process. I finally just deleted the table from my data source and then added it back.
View 4 Replies
Jun 1, 2012
I have a project where I added visually and successfully a datasource of MySql. I binded a datagridview with a table.
But, how do I change programatically the password, ip or user to connect with the MySql server? Because it can change at any time, so I can let the user change these values.
View 7 Replies
Feb 10, 2012
I refreshed my data sources to include additional items from the SQL Server databases and it appears that my entire data source from my VB.NET project disappeared.I am using Entity Framework. I may have clicked on something wrong, not quite sure. Unfortunately I can't recreate the Data Source without creating a new Entity and Data Model.I can delete the entry in the App.Config file and recreated it, however things aren't quite right.Is there a way that I can recreate my Data Source from the entry that is in my App.Config file...since that appears to have remained intact.BTW, I can go to my Data Model and successfully refresh from there, however my project isn't connecting to the database so I have quite a number of errors until I can get reconnected.
View 4 Replies
Oct 11, 2010
I have an Access database and I want to view on a datagridview specific rows. For that I used the following :
CasesBindingSource.Filter =
"OfferDate Between #1/1/1997# And #12/31/1997#"
Cases is the table, OfferDate a field of the table wich is DateTime type.
When I use Between operator I get the following error :The expression contains unsupported operator 'Between'.
View 2 Replies
Jun 24, 2010
How to know HTML source change or not change because this web site written ASP.net and information is changing in TABLE tags when pressed button.I'm not reading when change the TABLE tags.
View 6 Replies
Jun 23, 2011
I wanna do program to...I need function to change source of webiste, something like thiswebbrowser1.document.changesource...
View 2 Replies
Sep 16, 2010
I completed my first college assignment using visual basic 2005 express (Their first lesson was same)
and in order to submit it to my my proffessor I have to change the source code from a .sln to a .c or .cpp,how do I do this?
View 5 Replies
Mar 25, 2012
I have the below srtucture of html page
<video controls="controls" width="480" height="208" id="video1">
<source src="http://devfiles.myopera.com/articles/2642/sintel-trailer.ogv" type='video/ogg; codecs="theora, vorbis"'>
<source src="http://devfiles.myopera.com/articles/2642/sintel-trailer.mp4" type='video/mp4; codecs="avc1.42E01E, mp4a.40.2"'>
</video>
Now I want to load video using OpenfileDialog and replace the filename with it's extension in place of src="http://"
View 2 Replies
Mar 12, 2010
I am running a ssis package from .net code.It's a simple package that imports a text file into a sql database.[code]...
View 10 Replies
Jan 6, 2011
i use the following code to connect to my mdb file
Public Class activity
'declare a new data set
Dim ds As New DataSet()
' declare a data cursor to point to the current row in the data base
[code]....
i want to connect to a data base that is in "c: empaaa.mdb" and i want to write that path in a text box and modify in the code...
View 4 Replies
Jan 13, 2010
I'm working on a simple base form in which all the other forms in the project will inherit. This base form only adds 5 properties (at the moment) dealing with painting a gradient background. The problem I'm facing right now is when I change a property on Form1 (the test form) and click run it doesn't show that change. I also checked the .designer.vb file and when I make a change it's not added to the code behind file, I'm at a loss right now to why.
[Code]...
View 5 Replies
Aug 18, 2009
I've got a function that's supposed to extract and return a 32x32px bitmap from a larger bitmap which has a set of 32x32 tiles inside it.
Here's the code I have now, but it's wrong since the Tile.GFX_Pos properties are telling it where in the destination image to draw, not where in the source image to draw from.
Overloads Shared Function TileGFX(ByVal SrcGFX As Bitmap, ByVal Tile As TileDef) As System.Drawing.Bitmap
Try
[Code]....
So since this doesn't work, what I'm wondering is if anyone knows a good way to select where in the SrcGFX bitmap to blit from, instead of (as currently and incorrectly) selecting where in the destination bitmap to blit to.
View 1 Replies
Apr 12, 2011
I've got a variable, BuildDateTimeStamp, would it be possible to add a pre build event to update the value of this variable?code]...
View 3 Replies
Apr 15, 2011
I have a WPF 4 and VB.net 2010 project. I am playing videos in a single mediaelement. This is what I need to do:When the window first opens, I have the first video play just fine. However, it is after this video plays that I run into trouble figuring out how to do the following.I need the video source to change immediately following a single play through of any video, and I need this video (henceforth referred to as an "ambient" video) to loop forever.When a certain event happens, I need to change the video source again, have it play once through, and then go back to looping ambient video in step 1.Here is the rub, however. Many of the video triggers are inside of If-Then or Select Case statements in code behind, so I'm not exclusively using simple WPF events such as "MouseUp" or "MouseEnter".Also, all videos must play in the same mediaelement, for performance reasons.
View 2 Replies
Feb 22, 2011
Modifying data with the ListView's EditItemTemplate by programmatically settings its DataSource property and calling its DataBind method. I don't have option to use data source control for ListView. All ListViews are bound with data from code-behind. So, I have to handle the Edit/Update mode of ListView manually. [Code]
View 2 Replies
Jul 7, 2011
I'm trying to connect a VB application (2010) to an MS Access DB by adding a data source from the data menu but I receive this error message "The connection you selected uses a local data file that is not in the current project.Would you like to copy the file to your project and modify the connection ?
If you copy the data file to your project, it will be copied to the project's output directory each time you run the application" and the options are (yes , No , Help)
If I choose Yes I will not be able to make the application 'device independent ' since it will not be copied under the bin , and if I choose No , changes won't be applied to the DB
View 5 Replies
Apr 23, 2010
how to use the VS 2010 IDE tools in a way the Microsofties didn't specifically intend. But since this is something I immediately tried without success.
I have defined a .NET 4.0 WPF Application project with a simple class that looks like this:
Public Class Class1
Public Property One As String = "OneString"
Public Property Two As String = "TwoString"
[Code]....
The expected result was that "OneString" would appear next to "One" and "TwoString" next to "Two" in the running window.
The question is: Why didn't this work? What will work instead? If I put bindings in a DataTemplate, it works. Blend, with its sample data stuff, implied that this should work, but it doesn't.
View 1 Replies
Sep 2, 2009
I think that changing from WinForms to WPF just because the blur effect is easier to do in WPF is the stupiest thing i can do right now it took me time to understand how the windows form application works i dont even how change the source of an image in WPF so here we are again. how to blur a speciefied image using CODE ONLY ?
See what im trying to do:
1. Imagine that you turn on your pc. takes some time to load.
2. Finally for the first time you are on the desktop.
3. Before you do something after every icon is loaded my program
takes a picture of the desktop and blurs it.
4. then it runs fullscreen showing the desktop behind as blurred and
not giving you access to the desktop.
5. a login/register border pops up
6. if you login the program closes if you dont it stays there
waiting for you to login or register.
I wont use it that way im planning to do it on the startup of my program only blur the window not the screen (i mean the content of my window) untill you login or register then it clears again. What i need to learn:
1. How to take a screenshot of my program (only yhe content of the window) [Progress: 1% (cause i know how to take a screenshot of the desktop)]
2. How to blur that image [Progress: 100%]
No need for third party programs or dlls i mean isnt there a default function in vb.net the stupiest way to do it?
View 7 Replies
May 10, 2010
I have 5 combo boxes that need to show the same list of items that come from a single dataset table. I have managed to bind the datatable to the combo boxes no problem at all.. but when I run the application and select an item from one of the combo boxes all the others change to the item I selected. After some research I believe that this problem is something to do with using the one datasource so I have tried assigning the dataset datatable to 2 different variables and used them as datasources for 2 of the comboboxes but the same still happens.
A work around to this I can see is to call the same methods and SQL select statements 5 times over to get individual datasources for each combo box but this doing that sounds crazy to me. how I can get around this easily? Code snippet below shows 2 combox boxes and their datasources. I'm using VS2005, .Net 2
ComboBox1.DropDownStyle = ComboBoxStyle.DropDownList
ComboBox1.DataSource = AllergyListDataSet.Tables("ListOfAllergies")
ComboBox1.DisplayMember = "Condition"
[Code]....
View 3 Replies
Mar 21, 2010
can data reader be used as a data source for a grid control?
View 5 Replies
Nov 23, 2010
I want to be able to change an image depending on what is selected in the drop down box. I have this JS code to change the image. Simplified of course.
<script type="text/javascript">
function changeImage() {
var oDDL = document.all("ddlNAME");
var NAME= oDDL.options[oDDL.selectedIndex].text;
switch(NAME) {
[Code] .....
When I call this function I do it in my DDL implementation.
<asp:DropDownList ID="ddlNAME" runat="server" OnTextChanged="changeImage()" >
But for some reason the changeImage() is not firing. It is giving me an error saying
'changeImage' is not a member of 'ASP.default_aspx'
View 7 Replies
Nov 4, 2009
I have a combo box with a data source. This box shows one column of a table and allows me to select one item.Next, I have an ordinary text LABEL that I need to put text from another column of the item selected above.I tried to set the data binding field of the label, but this grabs only the first row or data and shows the selected column. That is nice, but I can not figure out how to update the selected selected ROW when the combo box item is changed.In this case the combo box lists a bunch of inventory parts. When I select a specific part, I need the change the text in a label to show the manufacturer. (like a sub-form). This same behavior will be used in several other places, but the relationships can cascade.
View 4 Replies
Jun 2, 2010
i'm got this sql query code in dataset designer
SELECT pkt.fldPackageID, pkt.fldPSID, pkt.fldQuantity, pkt.fldQuantityUsed, pkt.fldRetail, pkt.fldPK, ps.fldName
FROM tblPaketRow AS pkt INNER JOIN
tblProdukDanService AS ps ON ps.fldID = pkt.fldPSID
WHERE (pkt.fldPSID = @param)
I'm trying to display the results in datagridview,i drag from the data source in vs 2008..I can't figure out to do that.I use this code to set the @param on form_load event.
Me.TblPaketRowTableAdapter.JoinTable(SalonDataSet.tblPaketRow, modCommon.s)
View 10 Replies
