Is it possible to change the data source of a dropdown list in a gridview from another dropdown list selected index changed method in the same gridview?
for example I have a dropdown that needs to change its contents depending on what is chosen in the previous cell of the gridview, which is also a dropdown list.
I would like my gridview to be filtered by the dropdown list I have. It is pulling specific information from the database, so when you choose a value from the dropdown list, it should search through all the records and find only records with the ddl value in them.
The code that I am using in the codebehind for the SelectedIndexChanged is not right though. I get an error message saying 'Value' is not a member of 'Integer'. This is on the line dsCompanyFilter.SelectParameters.Add
It probably has something to do with the gridview not tying to the dropdown list properly, but I am not sure how to fix that code.
<asp:Content ID="Content2" ContentPlaceHolderID="body" Runat="Server"><br /><br /><br />
<asp:linkbutton id="btnAll" runat="server" text="ALL" onclick="btnAll_Click" />
[Code]....
how to setup a dropdown list over the gridview when I am in the editing mode? I would like use the code behind to bind the data after assigning to the data source... I am using Visual Studio 2008 ...
View 1 RepliesI have a gridview with a dropdown list that was created programmatcially. I want to have access to the selected value and to that row's Id. I have the dropdownlist created in *Gridview_RowDataBound* and I am able to use the text in the cell but my addHandler is never fired. Where do I give it the Add handler. I believe I can assign it the addhandler in RowCreated but how would I be able to set up the add handler if the button is created in rowdatabound?
[Code]...
It fits best in Rowdata bound because my dropdownlist items don't duplicate but I need to be able to use the addhandler I created.
This post is similar to one I have posted before about a dropdown filtering results in a gridview. Well now I need this dropdown to attach itself to a repeater that will filter results into a gridview. I have tried rptLetters.DataBind() in the code behind of the dropdown list, but that doesn't seem to be changing any of the letters at the top of the page when I click on different items in the dropdown list.The screenshot doesn't show enough of the products, but in this case it skips from G to L, and in the repeater the letters between G and L are still shown. I need to be able to get that repeater to recognize the letters that start each of the products associated with the company chosen.
<asp:Content ID="Content2" ContentPlaceHolderID="body" Runat="Server"><br /><br />
<asp:linkbutton id="btnAll" runat="server" text="ALL" onclick="btnAll_Click" />
<asp:repeater id="rptLetters" runat="server" datasourceid="dsLetters">
[code].....
I have a pair of dropdown lists, they are linked in the sense that in it is basically a 2-d array. I have a list of accounts, and a list of domains for each account. So based on which account the user selects from the dropdown, I need to populate the domain list with the appropriate selections. Is there a way I can do this without [code]...
View 2 RepliesI'm having a problem displaying an image from an ObjectData Source created by function which adds iems to a list(of T) class. The ObjectData Source then becomes the gridviews Data Soource. All the other fields are displaying, except the image.
[Code]...
How can I add a data to my drop down list came from database? My code is this. And when I try using this:
<form id="form1" runat="server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
[Code].....
It got errors in a webpage that says controls are not allowed to be put here. I only have an empty dropdown right now.
<asp:DropDownList ID="DdLocation" runat="server"></asp:DropDownList>
I'm trying to format a column from a GriedView based on an XML file as its data source.
I've just set the DataFormatString column property to {0:MM-dd-yyyy} from my BoundFied and set the HtmlEndure to false as well. This bound field has values like 2009-04-17 00:00:00.
But the column is still not getting the expect format (MM-dd-yyyy). I've just checked all orthers properties, but I really did not figure out what is my mistake! Do you have an idea about that?
I have a dropdownlist that I want to populate with a specific value and specific text. I'm not using a datasource but I am manually making a connection and retrieving data in code. How can I populate this dropdownlist? If I read the data with a datareader and increment an array I only get either the value or the text. This is what I have so far, but it is completely wrong:
//connection string etc goes here
Dbcmd2.CommandText = "select dept,deptname from table"
Dim dr As SqlClient.SqlDataReader[code]....
How can I get this to work without having to create a class object for Department? Is there anyway or should I create the class object?
i have a requirement of using a dropdown list/combobox in data grid for allowing user to select from the list. how can i do that.I want to have a particular column with this option available that should be filled with data from the SQL database.
[Code]...
now in this what i want is that user could select the emp id for which he wants to enter the data.then on the basis of the selection emp name field should be filled automatically and then user enter the salary which get saved after pressing a button on form how could i achieve that in VB.net and using SQL databse
I re-wrote this to make it more readable. If you want to skip right to the chase, look at the ALL CAPS comments in the code blocks. All necessary code has been included for debugging. I've searched multiple forums (including ASP.NET), and the MSDN library and cannot fix this >.<
[Code]....
GridView SORTING of DYNAMIC Columns and Data Source Scope
View 2 RepliesHow I can show header/footer of Asp.Net Gridview with empty data source?
View 1 RepliesThis is the code that i did to fetch data from the database and filling it to the combobox dropdown list at the form load event:
[Code]....
I have a two forms with about 25 bound controls on each in the same solution. All of the data for both forms is in the same SQL table. I need to filter the data and only get the data appropriate to the called form. I consulted an University VB professor and he would only say "it won't be easy".
I tried removing all of the bindings and rebinding them to the new datasource but there were still some remnants (probably from the navigator) that proved illusive.
Is the only solution to recreate the VB forms and bind them to the new datasource?
(using Visual Studio 2008 Professional)
Private Sub HazMatlLabelsBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles HazMatlLabelsBindingNavigatorSaveItem.Click
[Code]...
I have two comboboxes. The data sorce of combobox1 is a list of string that is fixed.Combobox2's data sorce will be a list of string that depends on the selection of combobox1. This is very similar to a common case as follows: first enter your contry, then depending on your enter, the second combobox will show you the list of universities in the country.
'Change selection of first combobox
Private Sub cbxClient_SelectedIndexChanged(sender As Object, e As EventArgs) Handles cbxClient.SelectedIndexChanged
[code]....
I had built an application such like items management, I used two table in two different database in two different engine server, the stack is, when I want to make event for add new data, how I can make the event for the combobox ID for switching it's datasource from before.. for the knowledge, the first table is Xtable, database is Xdatabase and the machine is Xmachine; and for the second one is : table is Ytable, database is Ydatabase and the server machine is Ymachine...
View 1 RepliesI have two DB tables Table1 and Table2I am displaying the data of Table1 using a gridview. I want to show the data of table2 in another gridview when a user clicks on a row on gridview1 i.e I want to change the data in gridview2 when the user clicks on a row on gridview1 . Both the tables are related using PersonID.
View 2 Repliesi have a code which has the connection string as driver. dim s as string = "Driver={SQL Server}; Server=xxxSQLEXPRESS; Database=dbRegister; Trusted_Connection=yes" i need to change that to - "data source=1.2.3.4;user id=xx;password=xxxxx;initial catalog=xxxxx;Connect Timeout=30" when i just change the text it gives this error - "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified" how do i declare the datasource?
View 2 Repliesi have a code which has the connection string as driver.dim s as string = "Drr={SQL Server};Server=xxxSQLEXPRESS; Database=dbRegister; Trusted_Connection=yes"i need to change that to"data source=1.2.3.4;user id=xx;password=xxxxx;initial catalog=xxxxx;Connect Timeout=30"hen i just change the text it gives this error -"[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
View 13 RepliesI want to change the source data for my pivot table in Excel using VB.Net to a named range.
I have : table.ChangePivotCache(wb.PivotCaches.Create(SourceType:=Excel.XlPivotTableSourceType.xlDatabase, SourceData:=sheet.Names("name_of_NamedRange").RefersToRange))
Exception : The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I need a Data ComboBox having GridView in it's List Portion to have multiple columns in it. Purpose is Consider a 'Products Combo Box' where i want following fields to display
1] Product Icon
2] Product Name/Description
3] Product Price
4] Product Stock In Hand
where i can Format the 'Price' field to say Currency Type, 'Stock In Hand' field set to Particular ForeColors (at Run Time) depends on wheather the current stock is Negative or below minimum range or adiquate stock and so on. Similar controls are already available with MS Access so Why Not In VB?
is there a chance that I change the header name of the exported data from gridview. Below is my code and its working fine. my only problem is I can't change the header name
My code
Dim strFilename As String = Now.Date.Month.ToString + Now.Date.Day.ToString + Now.Hour.ToString + Now.Minute.ToString + Now.Second.ToString
Response.AddHeader("content-disposition", "attachment;filename=" & strFilename & ".xls")
[Code]....
I am trying to find way to design a report using my own custom class. I found links:
1.) How to work in Crystal Report with Object Data Source?
2.) Use .net object as data source in Crystal Report 2008
3.) Binding object with List<> to Crystal Report
4.) How to assign Custom class as datasource in crystal report
They were quite helpful, but I have been stuck in the first step while designing report as my custom class's property is not listed in field list of crystal report design view.[code]When I add my class objects to crystal report I do not get the usertype field from users class in field list.So how can I add usertype field to my field list? Or do I have to take another approach?The reason i wanted to use it as i am:
1.) Showing a form where user can type keyword
2.) program filters the records as per keyword using LINQ
3.) when user clicks the print button, I want to set the filtered records as datasource of my report
I'm using a MS Access 2007 database. I modified the field definition of one of the fields in a table, it a text field and I change the maximum length from 40 to 150. I have a data source in my app that contains this table and many others. I refreshed the data source but the change didn't take affect. I went through configure option but the change still didn't take affect. It gives me this error,
The value violates the MaxLength limit of this column.
If I add/delete a database field the data source is updated when I go through the configure process. I finally just deleted the table from my data source and then added it back.
So in this gridview, there is a column for status and I want to have a drop down list with Pass, Pending, Fail appear when the edit button is clicked. These values are already in a table, so I need to somehow bind from this table to each ddl for every row.Here is the column from the gridview. As you can see, I would like to just have a label showing when not in edit mode, and a ddl when the edit button is pressed
<asp:TemplateField HeaderText="During Production Status" SortExpression="DuringProductionStatus">
<EditItemTemplate>
[code]......
I have a GRIDVIEW with columns, one of which contains a CSV of possible values for the dropdown that must appear on each row.
Private Sub GridViewParameters_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles GridViewParameters.RowDataBound
If e.Row.RowType = DataControlRowType.DataRow Then[code].....
Depending on whether the type of control is a dropdown, textbox, or check box (feined in the table) it hides or shows the relevant control type. If it is a dropdown it needs to get its values from a CSV in a corresponding column. I have a SP that returns a these in table form if passed the id of the relevant row.How do I get that is from the gridview to pass to the drop down and load it correctly?
I see a bunch of solutions about editing the template, but seeing as how my gridview changes between 10 different datasources a template isn't possible. how I can accomplish this?
View 1 RepliesI have a project where I added visually and successfully a datasource of MySql. I binded a datagridview with a table.
But, how do I change programatically the password, ip or user to connect with the MySql server? Because it can change at any time, so I can let the user change these values.